Typical MIMO propagation channels in urban macrocells at 2GHz

International audienceA directional wideband measurement campaign was performed in urban macrocells at 2 GHz using a channel sounder and a 8-sensor linear antenna array at the base station. Directions of arrival at the Base Station (BS) were estimated by beamforming using the antenna array. Directions of arrival at the Mobile Station (MS) were estimated by beamforming using parts of the measurement route. Global parameters (delay spread, azimuth spread at BS, maximum factor and street canyon factor) were processed from the Azimuth-Delay Power Profiles (ADPP) at BS and MS. In this paper, we compare the statistics of these four parameters with the statistics of those simulated by the 3GPP-SCM system-level model and the statistics of those reported in the literature. We find an acceptable agreement between our measurements and the SCM model except for the delay spread and the street canyon factor. The azimuth spread at BS mean Value (9.5°) and delay spread mean value (0.250 μs) are also in accordance with values reported in other references. Azimuth spreads are ranged from 7° to 11°, and delay spreads are ranged from 0.1 μs to 1 μs. From a statistical analysis of global parameters, we show that most of the measured propagation Channels can be classified in three main categories: low spatial diversity at MS and BS, high spatial diversity at MS and BS, low spatial diversity at BS and high spatial diversity at MS

Artifact paths removal algorithm for ultra-wideband channels

Ultra-wideband (UWB) is a promising technology for achieving high data rate communications. When UWB channel measurements are conducted, channel impulse responses (CIRs) are extracted from measured UWB waveforms using CLEAN deconvolution algorithm. However, artifact paths that represent unreal received multipath components (MPCs) are generated during this process. These artifact paths are registered as part of the measured CIRs representing a reflected signal from a scatterer. In reality, these paths do not represent a real scattering environment and this affects accurate channel modeling. Therefore, removal of the artifact paths is important to conserve better and have a more real scattering environment. In this work, an algorithm was developed to remove artifact paths from measured CIRs. The algorithm development was achieved based on the concept of geometric elliptical modeling applied to wideband channels, where the effective path in each ellipse is utilized to represent the channel response of the ellipse. Several UWB channel measurements were conducted to obtain the measured UWB waveforms. In addition, the characteristics of the UWB channels were analyzed in terms of CIRs properties and their stationarity regions. The algorithm performance was evaluated by comparing the single-template CLEAN CIRs with the CIRs result from the application of the developed algorithm on single-template CLEAN CIRs. Results showed that the developed algorithm can successfully remove the artifact paths. Besides that, an enhancement in the received power was achieved. For a specific measured channel, the received power enhancement obtained was more than 5%. The algorithm is beneficial for enhancing accuracy of CIRs extracted from a single-template CLEAN algorithm. Consequently, more accurate channel characteristics are gained leading to improved channel modelling and different parameter extractions