SAR data compression: Application, requirements, and designs

The feasibility of reducing data volume and data rate is evaluated for the Earth Observing System (EOS) Synthetic Aperture Radar (SAR). All elements of data stream from the sensor downlink data stream to electronic delivery of browse data products are explored. The factors influencing design of a data compression system are analyzed, including the signal data characteristics, the image quality requirements, and the throughput requirements. The conclusion is that little or no reduction can be achieved in the raw signal data using traditional data compression techniques (e.g., vector quantization, adaptive discrete cosine transform) due to the induced phase errors in the output image. However, after image formation, a number of techniques are effective for data compression

Efficient SAR Raw Data Compression in Frequency Domain

SAR raw data compression is necessary to reduce huge amounts of SAR data for a memory on board a satellite, space shuttle or aircraft and for later downlink to a ground station. In view of interferometric and polarimetric applications for SAR data, it becomes more and more important to pay attention to phase errors caused by data compression. Herein, a detailed comparison of block adaptive quantization in time domain (BAQ) and in frequency domain (FFT-BAQ) is given. Inclusion of raw data compression in the processing chain allows an efficient use of the FFT-BAQ and makes implementation for on-board data compression feasible. The FFT-BAQ outperforms the BAQ in terms of signal-to-quantization noise ratio and phase error and allows a direct decimation of the oversampled data equivalent to FIR-filtering in time domain. Impacts on interferometric phase and coherency are also given

Project MEDSAT

During the winter term of 1991, two design courses at the University of Michigan worked on a joint project, MEDSAT. The two design teams consisted of the Atmospheric, Oceanic, and Spacite System Design and Aerospace Engineering 483 (Aero 483) Aerospace System Design. In collaboration, they worked to produce MEDSAT, a satellite and scientific payload whose purpose was to monitor environmental conditions over Chiapas, Mexico. Information gained from the sensing, combined with regional data, would be used to determine the potential for malaria occurrence in that area. The responsibilities of AOSS 605 consisted of determining the remote sensing techniques, the data processing, and the method to translate the information into a usable output. Aero 483 developed the satellite configuration and the subsystems required for the satellite to accomplish its task. The MEDSAT project is an outgrowth of work already being accomplished by NASA's Biospheric and Disease Monitoring Program and Ames Research Center. NASA's work has been to develop remote sensing techniques to determine the abundance of disease carriers and now this project will place the techniques aboard a satellite. MEDSAT will be unique in its use of both a Synthetic Aperture Radar and visual/IR sensor to obtain comprehensive monitoring of the site. In order to create a highly feasible system, low cost was a high priority. To obtain this goal, a light satellite configuration launched by the Pegasus launch vehicle was used

Data compression in remote sensing applications

A survey of current data compression techniques which are being used to reduce the amount of data in remote sensing applications is provided. The survey aspect is far from complete, reflecting the substantial activity in this area. The purpose of the survey is more to exemplify the different approaches being taken rather than to provide an exhaustive list of the various proposed approaches

An introduction to the interim digital SAR processor and the characteristics of the associated Seasat SAR imagery

Basic engineering data regarding the Interim Digital SAR Processor (IDP) and the digitally correlated Seasat synthetic aperature radar (SAR) imagery are presented. The correlation function and IDP hardware/software configuration are described, and a preliminary performance assessment presented. The geometric and radiometric characteristics, with special emphasis on those peculiar to the IDP produced imagery, are described

Synthetic Aperture Radar (SAR) data processing

The available and optimal methods for generating SAR imagery for NASA applications were identified. The SAR image quality and data processing requirements associated with these applications were studied. Mathematical operations and algorithms required to process sensor data into SAR imagery were defined. The architecture of SAR image formation processors was discussed, and technology necessary to implement the SAR data processors used in both general purpose and dedicated imaging systems was addressed

Advanced methods and deep learning for video and satellite data compression

L'abstract è presente nell'allegato / the abstract is in the attachmen

A 76nW, 4kS/s 10-bit SAR ADC with offset cancellation for biomedical applications

This paper presents a 10-bit fully-differential rail-to-rail successive approximation (SAR) ADC designed for biomedical applications. The ADC, fabricated in a 180nm HV CMOS technology, features low switching energy consumption and employs a time-domain comparator which includes an offset cancellation mechanism. The power dissipated by the ADC is 76.2nW at 4kS/s and achieves 9.5 ENOB.Ministerio de Economía y Competitividad TEC2012-33634Office of Naval Research (USA) N0001414135