13,213 research outputs found
Towards a Realistic Assessment of Multiple Antenna HCNs: Residual Additive Transceiver Hardware Impairments and Channel Aging
Given the critical dependence of broadcast channels by the accuracy of
channel state information at the transmitter (CSIT), we develop a general
downlink model with zero-forcing (ZF) precoding, applied in realistic
heterogeneous cellular systems with multiple antenna base stations (BSs).
Specifically, we take into consideration imperfect CSIT due to pilot
contamination, channel aging due to users relative movement, and unavoidable
residual additive transceiver hardware impairments (RATHIs). Assuming that the
BSs are Poisson distributed, the main contributions focus on the derivations of
the upper bound of the coverage probability and the achievable user rate for
this general model. We show that both the coverage probability and the user
rate are dependent on the imperfect CSIT and RATHIs. More concretely, we
quantify the resultant performance loss of the network due to these effects. We
depict that the uplink RATHIs have equal impact, but the downlink transmit BS
distortion has a greater impact than the receive hardware impairment of the
user. Thus, the transmit BS hardware should be of better quality than user's
receive hardware. Furthermore, we characterise both the coverage probability
and user rate in terms of the time variation of the channel. It is shown that
both of them decrease with increasing user mobility, but after a specific value
of the normalised Doppler shift, they increase again. Actually, the time
variation, following the Jakes autocorrelation function, mirrors this effect on
coverage probability and user rate. Finally, we consider space division
multiple access (SDMA), single user beamforming (SU-BF), and baseline
single-input single-output (SISO) transmission. A comparison among these
schemes reveals that the coverage by means of SU-BF outperforms SDMA in terms
of coverage.Comment: accepted in IEEE TV
Modeling and Performance of Uplink Cache-Enabled Massive MIMO Heterogeneous Networks
A significant burden on wireless networks is brought by the uploading of user-generated contents to the Internet by means of applications such as social media. To cope with this mobile data tsunami, we develop a novel multiple-input multiple-output (MIMO) network architecture with randomly located base stations (BSs) a large number of antennas employing cache-enabled uplink transmission. In particular, we formulate a scenario, where the users upload their content to their strongest BSs, which are Poisson point process distributed. In addition, the BSs, exploiting the benefits of massive MIMO, upload their contents to the core network by means of a finite-rate backhaul. After proposing the caching policies, where we propose the modified von Mises distribution as the popularity distribution function, we derive the outage probability and the average delivery rate by taking advantage of tools from the deterministic equivalent and stochastic geometry analyses. Numerical results investigate the realistic performance gains of the proposed heterogeneous cache-enabled uplink on the network in terms of cardinal operating parameters. For example, insights regarding the BSs storage size are exposed. Moreover, the impacts of the key parameters such as the file popularity distribution and the target bitrate are investigated. Specifically, the outage probability decreases if the storage size is increased, while the average delivery rate increases. In addition, the concentration parameter, defining the number of files stored at the intermediate nodes (popularity), affects the proposed metrics directly. Furthermore, a higher target rate results in higher outage because fewer users obey this constraint. Also, we demonstrate that a denser network decreases the outage and increases the delivery rate. Hence, the introduction of caching at the uplink of the system design ameliorates the network performance.Peer reviewe
Yield-driven power-delay-optimal CMOS full-adder design complying with automotive product specifications of PVT variations and NBTI degradations
We present the detailed results of the application of mathematical optimization algorithms to transistor sizing in a full-adder cell design, to obtain the maximum expected fabrication yield. The approach takes into account all the fabrication process parameter variations specified in an industrial PDK, in addition to operating condition range and NBTI aging. The final design solutions present transistor sizing, which depart from intuitive transistor sizing criteria and show dramatic yield improvements, which have been verified by Monte Carlo SPICE analysis
Nuts and Bolts of a Realistic Stochastic Geometric Analysis of mmWave HetNets: Hardware Impairments and Channel Aging
© 2019 IEEE.Motivated by heterogeneous network (HetNet) design in improving coverage and by millimeter-wave (mmWave) transmission offering an abundance of extra spectrum, we present a general analytical framework shedding light on the downlink of realistic mmWave HetNets consisting of K tiers of randomly located base stations. Specifically, we model, by virtue of stochastic geometry tools, the multi-Tier multi-user (MU) multiple-input multiple-output (MIMO) mmWave network degraded by the inevitable residual additive transceiver hardware impairments (RATHIs) and channel aging. Given this setting, we derive the coverage probability and the area spectral efficiency (ASE), and we subsequently evaluate the impact of residual transceiver hardware impairments and channel aging on these metrics. Different path-loss laws for line-of-sight and non-line-of-sight are accounted for the analysis, which are among the distinguishing features of mmWave systems. Among the findings, we show that the RATHIs have a meaningful impact at the high-signal-To-noise-ratio regime, while the transmit additive distortion degrades further than the receive distortion the system performance. Moreover, serving fewer users proves to be preferable, and the more directive the mmWaves are, the higher the ASE becomes.Peer reviewedFinal Accepted Versio
Gaussian process regression for forecasting battery state of health
Accurately predicting the future capacity and remaining useful life of
batteries is necessary to ensure reliable system operation and to minimise
maintenance costs. The complex nature of battery degradation has meant that
mechanistic modelling of capacity fade has thus far remained intractable;
however, with the advent of cloud-connected devices, data from cells in various
applications is becoming increasingly available, and the feasibility of
data-driven methods for battery prognostics is increasing. Here we propose
Gaussian process (GP) regression for forecasting battery state of health, and
highlight various advantages of GPs over other data-driven and mechanistic
approaches. GPs are a type of Bayesian non-parametric method, and hence can
model complex systems whilst handling uncertainty in a principled manner. Prior
information can be exploited by GPs in a variety of ways: explicit mean
functions can be used if the functional form of the underlying degradation
model is available, and multiple-output GPs can effectively exploit
correlations between data from different cells. We demonstrate the predictive
capability of GPs for short-term and long-term (remaining useful life)
forecasting on a selection of capacity vs. cycle datasets from lithium-ion
cells.Comment: 13 pages, 7 figures, published in the Journal of Power Sources, 201
Decoherence benchmarking of superconducting qubits
We benchmark the decoherence of superconducting qubits to examine the
temporal stability of energy-relaxation and dephasing. By collecting statistics
during measurements spanning multiple days, we find the mean parameters
= 49 s and = 95 s, however,
both of these quantities fluctuate explaining the need for frequent
re-calibration in qubit setups. Our main finding is that fluctuations in qubit
relaxation are local to the qubit and are caused by instabilities of
near-resonant two-level-systems (TLS). Through statistical analysis, we
determine switching rates of these TLS and observe the coherent coupling
between an individual TLS and a transmon qubit. Finally, we find evidence that
the qubit's frequency stability is limited by capacitance noise. Importantly,
this produces a 0.8 ms limit on the pure dephasing which we also observe.
Collectively, these findings raise the need for performing qubit metrology to
examine the reproducibility of qubit parameters, where these fluctuations could
affect qubit gate fidelity.Comment: 15 pages ArXiv version rev
- …