A novel deep submicron bulk planar sizing strategy for low energy subthreshold standard cell libraries

Engineering andPhysical Science ResearchCouncil (EPSRC) and Arm Ltd for providing funding in the form of grants and studentshipsThis work investigates bulk planar deep submicron semiconductor physics in an attempt to improve standard cell libraries aimed at operation in the subthreshold regime and in Ultra Wide Dynamic Voltage Scaling schemes. The current state of research in the field is examined, with particular emphasis on how subthreshold physical effects degrade robustness, variability and performance. How prevalent these physical effects are in a commercial 65nm library is then investigated by extensive modeling of a BSIM4.5 compact model. Three distinct sizing strategies emerge, cells of each strategy are laid out and post-layout parasitically extracted models simulated to determine the advantages/disadvantages of each. Full custom ring oscillators are designed and manufactured. Measured results reveal a close correlation with the simulated results, with frequency improvements of up to 2.75X/2.43X obs erved for RVT/LVT devices respectively. The experiment provides the first silicon evidence of the improvement capability of the Inverse Narrow Width Effect over a wide supply voltage range, as well as a mechanism of additional temperature stability in the subthreshold regime. A novel sizing strategy is proposed and pursued to determine whether it is able to produce a superior complex circuit design using a commercial digital synthesis flow. Two 128 bit AES cores are synthesized from the novel sizing strategy and compared against a third AES core synthesized from a state-of-the-art subthreshold standard cell library used by ARM. Results show improvements in energy-per-cycle of up to 27.3% and frequency improvements of up to 10.25X. The novel subthreshold sizing strategy proves superior over a temperature range of 0 °C to 85 °C with a nominal (20 °C) improvement in energy-per-cycle of 24% and frequency improvement of 8.65X. A comparison to prior art is then performed. Valid cases are presented where the proposed sizing strategy would be a candidate to produce superior subthreshold circuits

Variability-Aware Design of Subthreshold Devices

Over the last 10 years, digital subthreshold logic circuits have been developed for applications in the ultra-low power design domain, where performance is not the priority. Recently, devices optimized for subthreshold operation have been introduced as potential construction blocks. However, for these devices, a strong sensitivity to process variations is expected due to the exponential relationship of the subthreshold drive current and the threshold voltage. In this thesis, a yield optimization technique is proposed to suppress the variability of a device optimized for subthreshold operation. The goal of this technique is to construct and inscribe a maximum yield cube in the 3-D feasible region composed of oxide thickness, gate length, and channel doping concentration. The center of this cube is chosen as the maximum yield design point with the highest immunity against variations. By using the technique, a transistor is optimized for subthreshold operation in terms of the desired total leakage current and intrinsic delay bounds. To develop the concept of the technique, sample devices are designed for 90nm and 65nm technologies. Monte Carlo simulations verify the accuracy of the technique for meeting power and delay constraints under technology-specific variances of the design parameters of the device

Energy challenges for ICT

The energy consumption from the expanding use of information and communications technology (ICT) is unsustainable with present drivers, and it will impact heavily on the future climate change. However, ICT devices have the potential to contribute signi - cantly to the reduction of CO2 emission and enhance resource e ciency in other sectors, e.g., transportation (through intelligent transportation and advanced driver assistance systems and self-driving vehicles), heating (through smart building control), and manu- facturing (through digital automation based on smart autonomous sensors). To address the energy sustainability of ICT and capture the full potential of ICT in resource e - ciency, a multidisciplinary ICT-energy community needs to be brought together cover- ing devices, microarchitectures, ultra large-scale integration (ULSI), high-performance computing (HPC), energy harvesting, energy storage, system design, embedded sys- tems, e cient electronics, static analysis, and computation. In this chapter, we introduce challenges and opportunities in this emerging eld and a common framework to strive towards energy-sustainable ICT

Impact of NCFET on Neural Network Accelerators

This is the first work to investigate the impact that Negative Capacitance Field-Effect Transistor (NCFET) brings on the efficiency and accuracy of future Neural Networks (NN). NCFET is at the forefront of emerging technologies, especially after it has become compatible with the existing fabrication process of CMOS. Neural Network inference accelerators are becoming ubiquitous in modern SoCs and there is an ever-increasing demand for tighter and tighter throughput constraints and lower energy consumption. To explore the benefits that NCFET brings to NN inference regarding frequency, energy, and accuracy, we investigate different configurations of the multiply-add (MADD) circuit, which is the core computational unit in any NN accelerator. We demonstrate that, compared to the baseline 7nm FinFET technology, its negative capacitance counterpart reduces the energy by 55%, without any frequency reduction. In addition, it enables leveraging higher computational precision, which results to a considerable improvement in the inference accuracy. Importantly, the achieved accuracy improvement comes also together with a significant energy reduction and without any loss in frequency

Layout regularity metric as a fast indicator of process variations

Integrated circuits design faces increasing challenge as we scale down due to the increase of the effect of sensitivity to process variations. Systematic variations induced by different steps in the lithography process affect both parametric and functional yields of the designs. These variations are known, themselves, to be affected by layout topologies. Design for Manufacturability (DFM) aims at defining techniques that mitigate variations and improve yield. Layout regularity is one of the trending techniques suggested by DFM to mitigate process variations effect. There are several solutions to create regular designs, like restricted design rules and regular fabrics. These regular solutions raised the need for a regularity metric. Metrics in literature are insufficient for different reasons; either because they are qualitative or computationally intensive. Furthermore, there is no study relating either lithography or electrical variations to layout regularity. In this work, layout regularity is studied in details and a new geometrical-based layout regularity metric is derived. This metric is verified against lithographic simulations and shows good correlation. Calculation of the metric takes only few minutes on 1mm x 1mm design, which is considered fast compared to the time taken by simulations. This makes it a good candidate for pre-processing the layout data and selecting certain areas of interest for lithographic simulations for faster throughput. The layout regularity metric is also compared against a model that measures electrical variations due to systematic lithographic variations. The validity of using the regularity metric to flag circuits that have high variability using the developed electrical variations model is shown. The regularity metric results compared to the electrical variability model results show matching percentage that can reach 80%, which means that this metric can be used as a fast indicator of designs more susceptible to lithography and hence electrical variations

Temperature Regulation in Multicore Processors Using Adjustable-Gain Integral Controllers

This paper considers the problem of temperature regulation in multicore processors by dynamic voltage-frequency scaling. We propose a feedback law that is based on an integral controller with adjustable gain, designed for fast tracking convergence in the face of model uncertainties, time-varying plants, and tight computing-timing constraints. Moreover, unlike prior works we consider a nonlinear, time-varying plant model that trades off precision for simple and efficient on-line computations. Cycle-level, full system simulator implementation and evaluation illustrates fast and accurate tracking of given temperature reference values, and compares favorably with fixed-gain controllers.Comment: 8 pages, 6 figures, IEEE Conference on Control Applications 2015, Accepted Versio

Imperfection-Aware Design of CNFET Digital VLSI Circuits

Carbon nanotube field-effect transistor (CNFET) is one of the promising candidates as extensions to silicon CMOS devices. The CNFET, which is a 1-D structure with a near-ballistic transport capability, can potentially offer excellent device characteristics and order-of-magnitude better energy-delay product over standard CMOS devices. Significant challenges in CNT synthesis prevent CNFETs today from achieving such ideal benefits. CNT density variation and metallic CNTs are the dominant type of CNT variations/imperfections that cause performance variation, large static power consumption, and yield degradation. We present an imperfection-aware design technique for CNFET digital VLSI circuits by: 1) Analytical models that are developed to analyze and quantify the effects of CNT density variation on device characteristics, gate and system levels delays. The analytical models, which were validated by comparison to real experimental/simulation data, enables us to examine the space of CNFET combinational, sequential and memory cells circuits to minimize delay variations. Using these model, we drive CNFET processing and circuit design guidelines to manage/overcome CNT density variation. 2) Analytical models that are developed to analyze the effects of metallic CNTs on device characteristics, gate and system levels delay and power consumption. Using our presented analytical models, which are again validated by comparison with simulation data, it is shown that the static power dissipation is a more critical issue than the delay and the dynamic power of CNFET circuits in the presence of m-CNTs. 3) CNT density variation and metallic CNTs can result in functional failure of CNFET circuits. The complete and compact model for CNFET probability of failure that consider CNT density variation and m-CNTs is presented. This analytical model is applied to analyze the logical functional failures. The presented model is extended to predict opportunities and limitations of CNFET technology at todays Gigascale integration and beyond.\u2

Statistical Yield Analysis and Design for Nanometer VLSI

Process variability is the pivotal factor impacting the design of high yield integrated circuits and systems in deep sub-micron CMOS technologies. The electrical and physical properties of transistors and interconnects, the building blocks of integrated circuits, are prone to significant variations that directly impact the performance and power consumption of the fabricated devices, severely impacting the manufacturing yield. However, the large number of the transistors on a single chip adds even more challenges for the analysis of the variation effects, a critical task in diagnosing the cause of failure and designing for yield. Reliable and efficient statistical analysis methodologies in various design phases are key to predict the yield before entering such an expensive fabrication process. In this thesis, the impacts of process variations are examined at three different levels: device, circuit, and micro-architecture. The variation models are provided for each level of abstraction, and new methodologies are proposed for efficient statistical analysis and design under variation. At the circuit level, the variability analysis of three crucial sub-blocks of today's system-on-chips, namely, digital circuits, memory cells, and analog blocks, are targeted. The accurate and efficient yield analysis of circuits is recognized as an extremely challenging task within the electronic design automation community. The large scale of the digital circuits, the extremely high yield requirement for memory cells, and the time-consuming analog circuit simulation are major concerns in the development of any statistical analysis technique. In this thesis, several sampling-based methods have been proposed for these three types of circuits to significantly improve the run-time of the traditional Monte Carlo method, without compromising accuracy. The proposed sampling-based yield analysis methods benefit from the very appealing feature of the MC method, that is, the capability to consider any complex circuit model. However, through the use and engineering of advanced variance reduction and sampling methods, ultra-fast yield estimation solutions are provided for different types of VLSI circuits. Such methods include control variate, importance sampling, correlation-controlled Latin Hypercube Sampling, and Quasi Monte Carlo. At the device level, a methodology is proposed which introduces a variation-aware design perspective for designing MOS devices in aggressively scaled geometries. The method introduces a yield measure at the device level which targets the saturation and leakage currents of an MOS transistor. A statistical method is developed to optimize the advanced doping profiles and geometry features of a device for achieving a maximum device-level yield. Finally, a statistical thermal analysis framework is proposed. It accounts for the process and thermal variations simultaneously, at the micro-architectural level. The analyzer is developed, based on the fact that the process variations lead to uncertain leakage power sources, so that the thermal profile, itself, would have a probabilistic nature. Therefore, by a co-process-thermal-leakage analysis, a more reliable full-chip statistical leakage power yield is calculated

Design for manufacturing (DFM) in submicron VLSI design

As VLSI technology scales to 65nm and below, traditional communication between design and manufacturing becomes more and more inadequate. Gone are the days when designers simply pass the design GDSII file to the foundry and expect very good man¬ufacturing and parametric yield. This is largely due to the enormous challenges in the manufacturing stage as the feature size continues to shrink. Thus, the idea of DFM (Design for Manufacturing) is getting very popular. Even though there is no universally accepted definition of DFM, in my opinion, one of the major parts of DFM is to bring manufacturing information into the design stage in a way that is understood by designers. Consequently, designers can act on the information to improve both manufacturing and parametric yield. In this dissertation, I will present several attempts to reduce the gap between design and manufacturing communities: Alt-PSM aware standard cell designs, printability improve¬ment for detailed routing and the ASIC design flow with litho aware static timing analysis. Experiment results show that we can greatly improve the manufacturability of the designs and we can reduce design pessimism significantly for easier design closure