334 research outputs found
Single-Carrier Modulation versus OFDM for Millimeter-Wave Wireless MIMO
This paper presents results on the achievable spectral efficiency and on the
energy efficiency for a wireless multiple-input-multiple-output (MIMO) link
operating at millimeter wave frequencies (mmWave) in a typical 5G scenario. Two
different single-carrier modem schemes are considered, i.e., a traditional
modulation scheme with linear equalization at the receiver, and a
single-carrier modulation with cyclic prefix, frequency-domain equalization and
FFT-based processing at the receiver; these two schemes are compared with a
conventional MIMO-OFDM transceiver structure. Our analysis jointly takes into
account the peculiar characteristics of MIMO channels at mmWave frequencies,
the use of hybrid (analog-digital) pre-coding and post-coding beamformers, the
finite cardinality of the modulation structure, and the non-linear behavior of
the transmitter power amplifiers. Our results show that the best performance is
achieved by single-carrier modulation with time-domain equalization, which
exhibits the smallest loss due to the non-linear distortion, and whose
performance can be further improved by using advanced equalization schemes.
Results also confirm that performance gets severely degraded when the link
length exceeds 90-100 meters and the transmit power falls below 0 dBW.Comment: accepted for publication on IEEE Transactions on Communication
Massive MIMO for Next Generation Wireless Systems
Multi-user Multiple-Input Multiple-Output (MIMO) offers big advantages over
conventional point-to-point MIMO: it works with cheap single-antenna terminals,
a rich scattering environment is not required, and resource allocation is
simplified because every active terminal utilizes all of the time-frequency
bins. However, multi-user MIMO, as originally envisioned with roughly equal
numbers of service-antennas and terminals and frequency division duplex
operation, is not a scalable technology. Massive MIMO (also known as
"Large-Scale Antenna Systems", "Very Large MIMO", "Hyper MIMO", "Full-Dimension
MIMO" & "ARGOS") makes a clean break with current practice through the use of a
large excess of service-antennas over active terminals and time division duplex
operation. Extra antennas help by focusing energy into ever-smaller regions of
space to bring huge improvements in throughput and radiated energy efficiency.
Other benefits of massive MIMO include the extensive use of inexpensive
low-power components, reduced latency, simplification of the media access
control (MAC) layer, and robustness to intentional jamming. The anticipated
throughput depend on the propagation environment providing asymptotically
orthogonal channels to the terminals, but so far experiments have not disclosed
any limitations in this regard. While massive MIMO renders many traditional
research problems irrelevant, it uncovers entirely new problems that urgently
need attention: the challenge of making many low-cost low-precision components
that work effectively together, acquisition and synchronization for
newly-joined terminals, the exploitation of extra degrees of freedom provided
by the excess of service-antennas, reducing internal power consumption to
achieve total energy efficiency reductions, and finding new deployment
scenarios. This paper presents an overview of the massive MIMO concept and
contemporary research.Comment: Final manuscript, to appear in IEEE Communications Magazin
Low-Complexity Hybrid Beamforming for Massive MIMO Systems in Frequency-Selective Channels
Hybrid beamforming for frequency-selective channels is a challenging problem
as the phase shifters provide the same phase shift to all of the subcarriers.
The existing approaches solely rely on the channel's frequency response and the
hybrid beamformers maximize the average spectral efficiency over the whole
frequency band. Compared to state-of-the-art, we show that substantial sum-rate
gains can be achieved, both for rich and sparse scattering channels, by jointly
exploiting the frequency and time domain characteristics of the massive
multiple-input multiple-output (MIMO) channels. In our proposed approach, the
radio frequency (RF) beamformer coherently combines the received symbols in the
time domain and, thus, it concentrates signal's power on a specific time
sample. As a result, the RF beamformer flattens the frequency response of the
"effective" transmission channel and reduces its root mean square delay spread.
Then, a baseband combiner mitigates the residual interference in the frequency
domain. We present the closed-form expressions of the proposed beamformer and
its performance by leveraging the favorable propagation condition of massive
MIMO channels and we prove that our proposed scheme can achieve the performance
of fully-digital zero-forcing when number of employed phase shifter networks is
twice the resolvable multipath components in the time domain.Comment: Accepted to IEEE Acces
Wideband receive spatial modulation with time domain pre-equalizer for large MIMO systems
© 2018 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other worksReceive spatial modulation (RSM) schemes are promising for massive multiple-input-multiple-output (MIMO) systems at millimeter wave (mmWave) bands because they require reduced complexity and low consumption hardware at the user terminal and exploit the receive spatial dimension to attain high spectral efficiency. To the best of our knowledge, these schemes have been developed for narrowband transmission. In this paper, we adapt RSM schemes for outdoor wideband mmWave massive MIMO systems. We consider the downlink of a single user system operating with single carrier RSM and design a low complexity time-domain finite impulse response pre-equalizer to combat the intersymbol interference caused by the wideband transmission, assuming imperfect channel knowledge. We show that receive antenna selection (RAS) is necessary for attaining high spectral efficiency and we suggest fast and efficient RAS algorithm. Simulation results show that the proposed RSM scheme achieves comparable spectral efficiency to the fully digital orthogonal frequency division multiplexing MIMO system with superior energy efficiency.Peer ReviewedPostprint (author's final draft
Cyclic Prefix-Free MC-CDMA Arrayed MIMO Communication Systems
The objective of this thesis is to investigate MC-CDMA MIMO systems where
the antenna array geometry is taken into consideration. In most MC-CDMA
systems, cyclic pre xes, which reduce the spectral e¢ ciency, are used. In order
to improve the spectral efficiency, this research study is focused on cyclic pre x-
free MC-CDMA MIMO architectures.
Initially, space-time wireless channel models are developed by considering the
spatio-temporal mechanisms of the radio channel, such as multipath propaga-
tion. The spatio-temporal channel models are based on the concept of the array
manifold vector, which enables the parametric modelling of the channel.
The array manifold vector is extended to the multi-carrier space-time array
(MC-STAR) manifold matrix which enables the use of spatio-temporal signal
processing techniques. Based on the modelling, a new cyclic pre x-free MC-
CDMA arrayed MIMO communication system is proposed and its performance
is compared with a representative existing system. Furthermore, a MUSIC-type
algorithm is then developed for the estimation of the channel parameters of the
received signal.
This proposed cyclic pre x-free MC-CDMA arrayed MIMO system is then
extended to consider the effects of spatial diffusion in the wireless channel. Spatial
diffusion is an important channel impairment which is often ignored and the
failure to consider such effects leads to less than satisfactory performance. A
subspace-based approach is proposed for the estimation of the channel parameters
and spatial spread and reception of the desired signal.
Finally, the problem of joint optimization of the transmit and receive beam-
forming weights in the downlink of a cyclic pre x-free MC-CDMA arrayed MIMO
communication system is investigated. A subcarrier-cooperative approach is used
for the transmit beamforming so that there is greater flexibility in the allocation
of channel symbols. The resulting optimization problem, with a per-antenna
transmit power constraint, is solved by the Lagrange multiplier method and an
iterative algorithm is proposed
- …