FLARE: A design environment for FLASH-based space applications

Designing a mass-memory device (i.e., a solid-state recorder) is one of the typical issues of mission-critical space system applications. Flash-memories could be used for this goal: a huge number of parameters and trade-offs need to be explored. Flash-memories are nonvolatile, shock-resistant and power-economic, but in turn have different drawback: e.g., their cost is higher than normal hard disk and the number of erasure cycles is bounded. Moreover space environment presents various issues especially because of radiations: different and quite often contrasting dimensions need to be explored during the design of a flash-memory based solid-state recorder. No systematic approach has so far been proposed to consider them all as a whole: as a consequence a novel design environment currently under development is aimed at supporting the design of flash-based mass-memory device for space application

Exploring Design Dimensions in Flash-based Mass-memory Devices

Mission-critical space system applications present several issues: a typical one is the design of a mass-memory device (i.e., a solid- state recorder). This goal could be accomplished by using flash- memories: the exploration of a huge number of parameters and trade-offs is needed. On the one hand flash-memories are nonvolatile, shock-resistant and power-economic, but on the other hand their cost is higher than normal hard disk, the number of erasure cycles is bounded and other different drawbacks have to be considered. In addition space environment presents various issues especially because of radiations: the design of a flash- memory based solid-state recorder implies the exploration of different and quite often contrasting dimensions. No systematic approach has so far been proposed to consider them all as a whole: as a consequence the design of flash-based mass-memory device for space applications is intended to be supported by a novel design environment currently under development and refinemen

Evaluating Software Architectures: Development Stability and Evolution

We survey seminal work on software architecture evaluationmethods. We then look at an emerging class of methodsthat explicates evaluating software architectures forstability and evolution. We define architectural stabilityand formulate the problem of evaluating software architecturesfor stability and evolution. We draw the attention onthe use of Architectures Description Languages (ADLs) forsupporting the evaluation of software architectures in generaland for architectural stability in specific

Memory-Based High-Level Synthesis Optimizations Security Exploration on the Power Side-Channel

High-level synthesis (HLS) allows hardware designers to think algorithmically and not worry about low-level, cycle-by-cycle details. This provides the ability to quickly explore the architectural design space and tradeoffs between resource utilization and performance. Unfortunately, security evaluation is not a standard part of the HLS design flow. In this article, we aim to understand the effects of memory-based HLS optimizations on power side-channel leakage. We use Xilinx Vivado HLS to develop different cryptographic cores, implement them on a Spartan-6 FPGA, and collect power traces. We evaluate the designs with respect to resource utilization, performance, and information leakage through power consumption. We have two important observations and contributions. First, the choice of resource optimization directive results in different levels of side-channel vulnerabilities. Second, the partitioning optimization directive can greatly compromise the hardware cryptographic system through power side-channel leakage due to the deployment of memory control logic. We describe an evaluation procedure for power side-channel leakage and use it to make best-effort recommendations about how to design more secure architectures in the cryptographic domain

Radiation safety based on the sky shine effect in reactor

In the reactor operation, neutrons and gamma rays are the most dominant radiation. As protection, lead and concrete shields are built around the reactor. However, the radiation can penetrate the water shielding inside the reactor pool. This incident leads to the occurrence of sky shine where a physical phenomenon of nuclear radiation sources was transmitted panoramic that extends to the environment. The effect of this phenomenon is caused by the fallout radiation into the surrounding area which causes the radiation dose to increase. High doses of exposure cause a person to have stochastic effects or deterministic effects. Therefore, this study was conducted to measure the radiation dose from sky shine effect that scattered around the reactor at different distances and different height above the reactor platform. In this paper, the analysis of the radiation dose of sky shine effect was measured using the experimental metho

A design tool for high-resolution high-frequency cascade continuous- time Σ∆ modulators

Event: Microtechnologies for the New Millennium, 2007, Maspalomas, Gran Canaria, SpainThis paper introduces a CAD methodology to assist the de signer in the implementation of continuous-time (CT) cas- cade Σ∆ modulators. The salient features of this methodology ar e: (a) flexible behavioral modeling for optimum accuracy- efficiency trade-offs at different stages of the top-down synthesis process; (b) direct synthesis in the continuous-time domain for minimum circuit complexity and sensitivity; a nd (c) mixed knowledge-based and optimization-based architec- tural exploration and specification transmission for enhanced circuit performance. The applicability of this methodology will be illustrated via the design of a 12 bit 20 MHz CT Σ∆ modulator in a 1.2V 130nm CMOS technology.Ministerio de Ciencia y Educación TEC2004-01752/MICMinisterio de Industria, Turismo y Comercio FIT-330100-2006-134 SPIRIT Projec

Engineering failure analysis and design optimisation with HiP-HOPS

The scale and complexity of computer-based safety critical systems, like those used in the transport and manufacturing industries, pose significant challenges for failure analysis. Over the last decade, research has focused on automating this task. In one approach, predictive models of system failure are constructed from the topology of the system and local component failure models using a process of composition. An alternative approach employs model-checking of state automata to study the effects of failure and verify system safety properties. In this paper, we discuss these two approaches to failure analysis. We then focus on Hierarchically Performed Hazard Origin & Propagation Studies (HiP-HOPS) - one of the more advanced compositional approaches - and discuss its capabilities for automatic synthesis of fault trees, combinatorial Failure Modes and Effects Analyses, and reliability versus cost optimisation of systems via application of automatic model transformations. We summarise these contributions and demonstrate the application of HiP-HOPS on a simplified fuel oil system for a ship engine. In light of this example, we discuss strengths and limitations of the method in relation to other state-of-the-art techniques. In particular, because HiP-HOPS is deductive in nature, relating system failures back to their causes, it is less prone to combinatorial explosion and can more readily be iterated. For this reason, it enables exhaustive assessment of combinations of failures and design optimisation using computationally expensive meta-heuristics. (C) 2010 Elsevier Ltd. All rights reserved

The imperfect hiding : some introductory concepts and preliminary issues on modularity

In this work we present a critical assessment of some problems and open questions on the debated notion of modularity. Modularity is greatly in fashion nowadays, being often proposed as the new approach to complex artefact production that enables to combine fast innovation pace, enhanced product variety and reduced need for co-ordination. In line with recent critical assessments of the managerial literature on modularity, we sustain that modularity is only one among several arrangements to cope with the complexity inherent in most high-technology artefact production, and by no means the best one. We first discuss relations between modularity and the broader (and much older within economics) notion of division of labour. Then we sustain that a modular approach to labour division aimed at eliminating technological interdependencies between components or phases of a complex production process may have, as a by-product, the creation of other types of interdependencies which may subsequently result in inefficiencies of various types. Hence, the choice of a modular design strategy implies the resolution of various tradeoffs. Depending on how such tradeoffs are solved, different organisational arrangements may be created to cope with ‘residual’ interdependencies. Hence, there is no need to postulate a perfect isomorphism, as some recent literature has proposed, between modularity at the product level and modularity at the organisational level

Examining trade-offs between social, psychological, and energy potential of urban form

Urban planners are often challenged with the task of developing design solutions which must meet multiple, and often contradictory, criteria. In this paper, we investigated the trade-offs between social, psychological, and energy potential of the fundamental elements of urban form: the street network and the building massing. Since formal methods to evaluate urban form from the psychological and social point of view are not readily available, we developed a methodological framework to quantify these criteria as the first contribution in this paper. To evaluate the psychological potential, we conducted a three-tiered empirical study starting from real world environments and then abstracting them to virtual environments. In each context, the implicit (physiological) response and explicit (subjective) response of pedestrians were measured. To quantify the social potential, we developed a street network centrality-based measure of social accessibility. For the energy potential, we created an energy model to analyze the impact of pure geometric form on the energy demand of the building stock. The second contribution of this work is a method to identify distinct clusters of urban form and, for each, explore the trade-offs between the select design criteria. We applied this method to two case studies identifying nine types of urban form and their respective potential trade-offs, which are directly applicable for the assessment of strategic decisions regarding urban form during the early planning stages