2,213 research outputs found
Routing Protocols for Underwater Acoustic Sensor Networks: A Survey from an Application Perspective
Underwater acoustic communications are different from terrestrial radio communications; acoustic channel is asymmetric and has large and variable end‐to‐end propagation delays, distance‐dependent limited bandwidth, high bit error rates, and multi‐path fading. Besides, nodes’ mobility and limited battery power also cause problems for networking protocol design. Among them, routing in underwater acoustic networks is a challenging task, and many protocols have been proposed. In this chapter, we first classify the routing protocols according to application scenarios, which are classified according to the number of sinks that an underwater acoustic sensor network (UASN) may use, namely single‐sink, multi‐sink, and no‐sink. We review some typical routing strategies proposed for these application scenarios, such as cross‐layer and reinforcement learning as well as opportunistic routing. Finally, some remaining key issues are highlighted
Node localization in underwater sensor networks (UWSN)
This dissertation focuses on node localization in underwater wireless sensor networks (UWSNs) where anchor nodes have knowledge of their own locations and communicate with sensor nodes in acoustic or magnetic induction (MI) means. The sensor nodes utilize the communication signals and the locations of anchor nodes to locate themselves and propagate their locations through the network.
For UWSN using MI communications, this dissertation proposes two localization methods: rotation matrix (RM)-based method and the distance-based method. Both methods require only two anchor nodes with arbitrarily oriented tri-directional coils to locate one sensor node in the 3-D space, thus having advantages in a sparse network. Simulation studies show that the RM-based method achieves high localization accuracy, while the distance-based method exhibits less computational complexity.
For UWSN using acoustic communications, this dissertation proposes a novel multi-hop node localization method in the 2-D and 3-D spaces, respectively. The proposed method estimates Euclidean distances to anchor nodes via multi-hop propagations with the help of angle of arrival (AoA) measurements. Simulation results show that the proposed method achieves better localization accuracy than existing multi-hop methods, with high localization coverage.
This dissertation also investigates the hardware implementation of acoustic transmitter and receiver, and conducted field experiments with the hardware to estimate ToA using single pseudo-noise (PN) and dual PN(DPN) sequences. Both simulation and field test results show that the DPN sequences outperform the single PNs in severely dispersive channels and when the carrier frequency offset (CFO) is high --Abstract, page iv
A Survey of Positioning Systems Using Visible LED Lights
© 2018 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works.As Global Positioning System (GPS) cannot provide satisfying performance in indoor environments, indoor positioning technology, which utilizes indoor wireless signals instead of GPS signals, has grown rapidly in recent years. Meanwhile, visible light communication (VLC) using light devices such as light emitting diodes (LEDs) has been deemed to be a promising candidate in the heterogeneous wireless networks that may collaborate with radio frequencies (RF) wireless networks. In particular, light-fidelity has a great potential for deployment in future indoor environments because of its high throughput and security advantages. This paper provides a comprehensive study of a novel positioning technology based on visible white LED lights, which has attracted much attention from both academia and industry. The essential characteristics and principles of this system are deeply discussed, and relevant positioning algorithms and designs are classified and elaborated. This paper undertakes a thorough investigation into current LED-based indoor positioning systems and compares their performance through many aspects, such as test environment, accuracy, and cost. It presents indoor hybrid positioning systems among VLC and other systems (e.g., inertial sensors and RF systems). We also review and classify outdoor VLC positioning applications for the first time. Finally, this paper surveys major advances as well as open issues, challenges, and future research directions in VLC positioning systems.Peer reviewe
Five Facets of 6G: Research Challenges and Opportunities
Whilst the fifth-generation (5G) systems are being rolled out across the
globe, researchers have turned their attention to the exploration of radical
next-generation solutions. At this early evolutionary stage we survey five main
research facets of this field, namely {\em Facet~1: next-generation
architectures, spectrum and services, Facet~2: next-generation networking,
Facet~3: Internet of Things (IoT), Facet~4: wireless positioning and sensing,
as well as Facet~5: applications of deep learning in 6G networks.} In this
paper, we have provided a critical appraisal of the literature of promising
techniques ranging from the associated architectures, networking, applications
as well as designs. We have portrayed a plethora of heterogeneous architectures
relying on cooperative hybrid networks supported by diverse access and
transmission mechanisms. The vulnerabilities of these techniques are also
addressed and carefully considered for highlighting the most of promising
future research directions. Additionally, we have listed a rich suite of
learning-driven optimization techniques. We conclude by observing the
evolutionary paradigm-shift that has taken place from pure single-component
bandwidth-efficiency, power-efficiency or delay-optimization towards
multi-component designs, as exemplified by the twin-component ultra-reliable
low-latency mode of the 5G system. We advocate a further evolutionary step
towards multi-component Pareto optimization, which requires the exploration of
the entire Pareto front of all optiomal solutions, where none of the components
of the objective function may be improved without degrading at least one of the
other components
Reconfigurable Intelligent Surfaces in Challenging Environments: Underwater, Underground, Industrial and Disaster
Reconfigurable intelligent surfaces (RISs) have been introduced to improve
the signal propagation characteristics by focusing the signal power in the
preferred direction, thus making the communication environment "smart". The
typical use cases and applications for the "smart" environment include beyond
5G communication networks, smart cities, etc. The main advantage of employing
RISs in such networks is a more efficient exploitation of spatial degrees of
freedom. This advantage manifests in better interference mitigation as well as
increased spectral and energy efficiency due to passive beam steering.
Challenging environments comprise a range of scenarios, which share the fact
that it is extremely difficult to establish a communication link using
conventional technology due to many impairments typically associated with the
propagation medium and increased signal scattering. Although the challenges for
the design of communication networks, and specifically the Internet of Things
(IoT), in such environments are known, there is no common enabler or solution
for all these applications. Interestingly, the use of RISs in such scenarios
can become such an enabler and a game changer technology. Surprisingly, the
benefits of RIS for wireless networking in underwater and underground medium as
well as in industrial and disaster environments have not been addressed yet. In
this paper, we aim at filling this gap by discussing potential use cases,
deployment strategies and design aspects for RIS devices in underwater IoT,
underground IoT as well as Industry 4.0 and emergency networks. In addition,
novel research challenges to be addressed in this context are described.Comment: 16 pages, 13 figures, submitted for publication in IEEE journa
- …