Derivation of a cost model to aid management of CNC machine tool accuracy maintenance

Manufacturing industries strive to produce improved component accuracy while not reducing machine tool availability or production throughput. The accuracy of CNC production machines is one of the critical factors in determining the quality of these components. Maintaining the capability of the machine to produce in-tolerance parts can be approached in one of two ways: run to failure or periodic calibration and monitoring. The problem is analogous to general machine tool maintenance, but with the clear distinction that the failure mode of general machine tool components results in a loss of production, whereas that of accuracy allows parts to be produced, which are only later detected as non-conforming as part of the quality control processes. This distinction creates problems of cost-justification, since at this point in the manufacturing chain, any responsibility of the machine is not directly evident. Studies in the field of maintenance have resulted in cost calculations for the downtime associated with machine failure. This paper addresses the analogous, unanswered problem of maintaining the accuracy of CNC machine tools. A mathematical cost function is derived that can form the basis of a strategy for either running until non-conforming parts are detected or scheduling predictive CNC machine tool calibrations. This is sufficiently generic that it can consider that this decision will be based upon different scales of production, different values of components etc. Therefore, the model is broken down to a level where these variables for the different inputs can be tailored to the individual manufacturer

Two-stage generalized age maintenance of a queue-like production system

In general, the initiation of preventive maintenance should be based on the technical state as well as the operating state of a production system. Since the operating state of a production system is often subject to fluctuations in time, the planning of preventive maintenance at preset points in time (e.g. age/block replacement) cannot be optimal. Therefore, we propose a so-called two-stage maintenance policy, which - in a first stage - uses the technical state of the production system to determine a finite interval [t, t + At] during which preventive maintenance must be carried out, and - in a second stage - uses the operating state of the production system to determine the optimal starting time for preventive maintenance within that interval. A generalized age maintenance policy optimizing both t and At is formulated in the first stage. To this end, the actual starting time of preventive maintenance is modelled in terms of a uniform distribution over the maintenance interval. Moreover, the expected costs of preventive maintenance are modelled as a decreasing function of the interval size. An efficient algorithm is developed to demonstrate the optimal strategy for a queue-like production system, via numerical results that offer useful insights

Integration of production, maintenance and quality : Modelling and solution approaches

Dans cette thèse, nous analysons le problème de l'intégration de la planification de production et de la maintenance préventive, ainsi que l'élaboration du système de contrôle de la qualité. Premièrement, on considère un système de production composé d'une machine et de plusieurs produits dans un contexte incertain, dont les prix et le coût changent d'une période à l'autre. La machine se détériore avec le temps et sa probabilité de défaillance, ainsi que le risque de passage à un état hors contrôle augmentent. Le taux de défaillance dans un état dégradé est plus élevé et donc, des coûts liés à la qualité s’imposent. Lorsque la machine tombe en panne, une maintenance corrective ou une réparation minimale seront initiées pour la remettre en marche sans influer ses conditions ou le processus de détérioration. L'augmentation du nombre de défaillances de la machine se traduit par un temps d'arrêt supérieur et un taux de disponibilité inférieur. D'autre part, la réalisation des plans de production est fortement influencée par la disponibilité et la fiabilité de la machine. Les interactions entre la planification de la maintenance et celle de la production sont incorporées dans notre modèle mathématique. Dans la première étape, l'effet de maintenance sur la qualité est pris en compte. La maintenance préventive est considérée comme imparfaite. La condition de la machine est définie par l’âge actuel, et la machine dispose de plusieurs niveaux de maintenance avec des caractéristiques différentes (coûts, délais d'exécution et impacts sur les conditions du système). La détermination des niveaux de maintenance préventive optimaux conduit à un problème d’optimisation difficile. Un modèle de maximisation du profit est développé, dans lequel la vente des produits conformes et non conformes, les coûts de la production, les stocks tenus, la rupture de stock, la configuration de la machine, la maintenance préventive et corrective, le remplacement de la machine et le coût de la qualité sont considérés dans la fonction de l’objectif. De plus, un système composé de plusieurs machines est étudié. Dans cette extension, les nombres optimaux d’inspections est également considéré. La fonction de l’objectif consiste à minimiser le coût total qui est la somme des coûts liés à la maintenance, la production et la qualité. Ensuite, en tenant compte de la complexité des modèles préposés, nous développons des méthodes de résolution efficaces qui sont fondées sur la combinaison d'algorithmes génétiques avec des méthodes de recherches locales. On présente un algorithme mimétique qui emploi l’algorithme Nelder-Mead, avec un logiciel d'optimisation pour déterminer les valeurs exactes de plusieurs variables de décisions à chaque évaluation. La méthode de résolution proposée est comparée, en termes de temps d’exécution et de qualités des solutions, avec plusieurs méthodes Métaheuristiques. Mots-clés : Planification de la production, Maintenance préventive imparfaite, Inspection, Qualité, Modèles intégrés, MétaheuristiquesIn this thesis, we study the integrated planning of production, maintenance, and quality in multi-product, multi-period imperfect systems. First, we consider a production system composed of one machine and several products in a time-varying context. The machine deteriorates with time and so, the probability of machine failure, or the risk of a shift to an out-of-control state, increases. The defective rate in the shifted state is higher and so, quality related costs will be imposed. When the machine fails, a corrective maintenance or a minimal repair will be initiated to bring the machine in operation without influencing on its conditions or on the deterioration process. Increasing the expected number of machine failures results in a higher downtime and a lower availability rate. On the other hand, realization of the production plans is significantly influenced by the machine availability and reliability. The interactions between maintenance scheduling and production planning are incorporated in the mathematical model. In the first step, the impact of maintenance on the expected quality level is addressed. The maintenance is also imperfect and the machine conditions after maintenance can be anywhere between as-good-as-new and as-bad-as-old situations. Machine conditions are stated by its effective age, and the machine has several maintenance levels with different costs, execution times, and impacts on the system conditions. High level maintenances on the one hand have greater influences on the improvement of the system state and on the other hand, they occupy more the available production time. The optimal determination of such preventive maintenance levels to be performed at each maintenance intrusion is a challenging problem. A profit maximization model is developed, where the sale of conforming and non-conforming products, costs of production, inventory holding, backorder, setup, preventive and corrective maintenance, machine replacement, and the quality cost are addressed in the objective function. Then, a system with multiple machines is taken into account. In this extension, the number of quality inspections is involved in the joint model. The objective function minimizes the total cost which is the sum of maintenance, production and quality costs. In order to reduce the gap between the theory and the application of joint models, and taking into account the complexity of the integrated problems, we have developed an efficient solution method that is based on the combination of genetic algorithms with local search and problem specific methods. The proposed memetic algorithm employs Nelder-Mead algorithm along with an optimization package for exact determination of the values of several decision variables in each chromosome evolution. The method extracts not only the positive knowledge in good solutions, but also the negative knowledge in poor individuals to determine the algorithm transitions. The method is compared in terms of the solution time and quality to several heuristic methods. Keywords : Multi-period production planning, Imperfect preventive maintenance, Inspection, Quality, Integrated model, Metaheuristic