Predictive control in matrix converters. Part II, Control strategies, weaknesses and trends

The second part of this paper presents an overview of different control strategies and applications for matrix converters (MCs) where predictive control techniques are applied. It will be shown that predictive control is a promising alternative to control MCs due to its simplicity and flexibility to include different constrains in the con¬trol for different industrial applications such as renewable energies, grid interconnection, multi-drives systems control, among others. In addition, some limitations and weaknesses of predictive control in MCs will be discussed as well as some future trends and applications

Predictive control in matrix converters. Part I, Principles, topologies and applications

This paper presents an overview of the predictive control principles applied to matrix converters and also the different topologies where this control technique is applied. It will be shown that the predictive strategy is a promising alternative to control matrix converters due to its simplicity and flexibility to include additional aspects in the control being suitable for different industrial applications

A simple current control strategy for a four-leg indirect matrix converter

In this paper the experimental validation of a predictive current control strategy for a four-leg indirect matrix converter is presented. The four-leg indirect matrix converter can supply energy to an unbalanced three-phase load whilst providing a path for the zero sequence load. The predictive current control technique is based on the optimal selection among the valid switching states of the converter by evaluating a cost function, resulting in a simple approach without the necessity for modulators. Furthermore, zero dc-link current commutation is achieved by synchronizing the state changes in the input stage with the application of a zero voltage space vector in the inverter stage. Simulation results are presented and the strategy is experimentally validated using a laboratory prototype

High-performance motor drives

This article reviews the present state and trends in the development of key parts of controlled induction motor drive systems: converter topologies, modulation methods, as well as control and estimation techniques. Two- and multilevel voltage-source converters, current-source converters, and direct converters are described. The main part of all the produced electric energy is used to feed electric motors, and the conversion of electrical power into mechanical power involves motors ranges from less than 1 W up to several dozen megawatts

An Improved Model Predictive Control Method to Drive an Induction Motor Fed by Three-Level Diode-Clamped Indirect Matrix Converter

In this paper, an improved model predictive control method is proposed to drive an induction motor fed by a three-level matrix converter. The main objective of this paper is to present a novel method to increase the switching frequency at a constant sampling time. Also, it is analytically discussed that increasing the switching frequency not only can decrease the motor current ripples, but it can also significantly reduce its torque ripples. Finally, this study demonstrates that reducing the motor current ripple will improve the quality of the supply current. To be the accurate model and validate the motor drive system, a co-simulation method, which is a combination of FLUX and MATLAB software packages, is employed to find the simulation results. The findings indicate that the proposed method diminishes the THD of the supply current up to 26% approximately. Furthermore, increasing the switching frequency results in the torque ripple reduction by up to 10% almost

Improved Predictive Control in Multi-Modular Matrix Converter for Six-Phase Generation Systems

Distributed generation systems are emerging as a good solution as part of the response to the world’s growing energy demand. In this context multi-phase wind generation systems are a feasible option. These systems consist of renewable AC sources which requires efficient and controlled power conversion stages. This work proposes a novel predictive current control strategy that takes advantage of a multi-modular matrix converter topology in the power stage of a six-phase generation system. The proposed method uses a coupling signal between the modules to decrease the error and the total harmonic distortion compared to independent control of each module. Experimental results validate the new control strategy showing the improvement regarding the target parameters

Predictive Voltage Control of Direct Matrix Converters with Improved Output Voltage for Renewable Distributed Generation

© 2013 IEEE. This paper proposes a predictive voltage control strategy for a direct matrix converter used in a renewable energy distributed generation (DG) system. A direct matrix converter with LC filters is controlled in order to work as a stable voltage supply for loads. This is especially relevant for the stand-alone operation of a renewable DG where a stable sinusoidal voltage, with desired amplitude and frequency under various load conditions, is the main control objective. The model predictive control is employed to regulate the matrix converter so that it produces stable sinusoidal voltages for different loads. With predictive control, many other control objectives, e.g., input power factor, common-mode voltage, and switching frequency, can be achieved depending on the application. To reduce the number of required measurements and sensors, this paper utilizes observers and makes the use of the switch matrices. In addition, the voltage transfer ratio can be improved with the proposed strategy. The controller is tested under various conditions including intermittent disturbance, nonlinear loads, and unbalanced loads. The proposed controller is effective, simple, and easy to implement. The simulation and experimental results verify the effectiveness of the proposed scheme and control strategy. This proposed scheme can be potentially used in microgrid applications

Predictive control of power electronics converters in renewable energy systems

Version of RecordPublishe

A modified modulation scheme for three-level diode-clamped matrix converter under unbalanced input conditions

The three-level diode-clamped matrix converter topology has outstanding performance under ideal operating conditions. However, input disturbance can influence the waveforms at the output side of the converter due to the direct coupling between the input and output. This paper proposes a modified modulation scheme for three-level diode-clamped matrix converter during operation with unbalanced input voltages and when different transformer turns ratios are used for an isolation transformer at the input. With this modulation technique, sinusoidal and balanced output voltages are guaranteed and the input current harmonics are minimized. Experimental results are presented to demonstrate the feasibility and effectiveness of the proposed modulation scheme