4 research outputs found

    Evolutionary algorithms based tuning of PID controller for an AVR system

    Get PDF
    In this paper, an evolutionary algorithm based optimization algorithm is proposed with new objective function to design a PID controller for the automatic voltage regulator (AVR) system. The new objective function is proposed to improve the transient response of the AVR control system and to obtain the optimal values of controller gain. In this paper, particle swarm optimization (PSO) and cuckoo search (CS) algorithms are proposed to tune the parameters of a PID controller for the control of AVR system. Simulation results are capable and illustrate the effectiveness of the proposed method. Numerical and simulation results based on the proposed tuning approach on PID control of an AVR system for servo and regulatory control show the excellent performance of PSO and CS optimization algorithms

    Intelligent model-based control of complex multi-link mechanisms

    Get PDF
    Complex under-actuated multilink mechanism involves a system whose number of control inputs is smaller than the dimension of the configuration space. The ability to control such a system through the manipulation of its natural dynamics would allow for the design of more energy-efficient machines with the ability to achieve smooth motions similar to those found in the natural world. This research aims to understand the complex nature of the Robogymnast, a triple link underactuated pendulum built at Cardiff University with the purpose of studying the behaviour of non-linear systems and understanding the challenges in developing its control system. A mathematical model of the robot was derived from the Euler-Lagrange equations. The design of the control system was based on the discrete-time linear model around the downward position and a sampling time of 2.5 milliseconds. Firstly, Invasive Weed Optimization (IWO) was used to optimize the swing-up motion of the robot by determining the optimum values of parameters that control the input signals of the Robogymnast’s two motors. The values obtained from IWO were then applied to both simulation and experiment. The results showed that the swing-up motion of the Robogymnast from the stable downward position to the inverted configuration to be successfully achieved. Secondly, due to the complex nature and nonlinearity of the Robogymnast, a novel approach of modelling the Robogymnast using a multi-layered Elman neural ii network (ENN) was proposed. The ENN model was then tested with various inputs and its output were analysed. The results showed that the ENN model to be capable of providing a better representation of the actual system compared to the mathematical model. Thirdly, IWO is used to investigate the optimum Q values of the Linear Quadratic Regulator (LQR) for inverted balance control of the Robogymnast. IWO was used to obtain the optimal Q values required by the LQR to maintain the Robogymnast in an upright configuration. Two fitness criteria were investigated: cost function J and settling time T. A controller was developed using values obtained from each fitness criteria. The results showed that LQRT performed faster but LQRJ was capable of stabilizing the Robogymnast from larger deflection angles. Finally, fitness criteria J and T were used simultaneously to obtain the optimal Q values for the LQR. For this purpose, two multi-objective optimization methods based on the IWO, namely the Weighted Criteria Method IWO (WCMIWO) and the Fuzzy Logic IWO Hybrid (FLIWOH) were developed. Two LQR controllers were first developed using the parameters obtained from the two optimization methods. The same process was then repeated with disturbance applied to the Robogymnast states to develop another two LQR controllers. The response of the controllers was then tested in different scenarios using simulation and their performance was evaluated. The results showed that all four controllers were able to balance the Robogymnast with the fastest settling time achieved by WMCIWO with disturbance followed by in the ascending order: FLIWOH with disturbance, FLIWOH, and WCMIWO

    Improvements on the bees algorithm for continuous optimisation problems

    Get PDF
    This work focuses on the improvements of the Bees Algorithm in order to enhance the algorithm’s performance especially in terms of convergence rate. For the first enhancement, a pseudo-gradient Bees Algorithm (PG-BA) compares the fitness as well as the position of previous and current bees so that the best bees in each patch are appropriately guided towards a better search direction after each consecutive cycle. This method eliminates the need to differentiate the objective function which is unlike the typical gradient search method. The improved algorithm is subjected to several numerical benchmark test functions as well as the training of neural network. The results from the experiments are then compared to the standard variant of the Bees Algorithm and other swarm intelligence procedures. The data analysis generally confirmed that the PG-BA is effective at speeding up the convergence time to optimum. Next, an approach to avoid the formation of overlapping patches is proposed. The Patch Overlap Avoidance Bees Algorithm (POA-BA) is designed to avoid redundancy in search area especially if the site is deemed unprofitable. This method is quite similar to Tabu Search (TS) with the POA-BA forbids the exact exploitation of previously visited solutions along with their corresponding neighbourhood. Patches are not allowed to intersect not just in the next generation but also in the current cycle. This reduces the number of patches materialise in the same peak (maximisation) or valley (minimisation) which ensures a thorough search of the problem landscape as bees are distributed around the scaled down area. The same benchmark problems as PG-BA were applied against this modified strategy to a reasonable success. Finally, the Bees Algorithm is revised to have the capability of locating all of the global optimum as well as the substantial local peaks in a single run. These multi-solutions of comparable fitness offers some alternatives for the decision makers to choose from. The patches are formed only if the bees are the fittest from different peaks by using a hill-valley mechanism in this so called Extended Bees Algorithm (EBA). This permits the maintenance of diversified solutions throughout the search process in addition to minimising the chances of getting trap. This version is proven beneficial when tested with numerous multimodal optimisation problems

    Aerospace Medicine and Biology: A cumulative index to the 1982 issues

    Get PDF
    This publication is a cumulative index to the abstracts contained in the Supplements 229 through 240 of Aerospace Medicine and Biology: A continuing Bibliography. It includes three indexes: subject, personal author, and corporate source
    corecore