Potential impacts for monitoring sustainability: case study of hollow fiber membrane

Sustainability level is a new indicator of quality and efficiency for product life cycle. Sustainability should be balanced among Triple Bottom Line (TBL) aspects namely environmental, economic and social elements. For monitoring the sustainability of product, a comprehensive framework considering potential impacts for sustainability assessment should be developed. Previously, several studies presented frameworks to assess the sustainability level. However, few studies relate their frameworks with the potential impact of all TBL. Determination of potential impacts with its parameter is important during framework development. Potential impacts for environmental such global warming, acidification and eutrophication should be taken seriously. In this study, potential impacts for each sustainability aspects are shown. For the case study of hollow fiber membrane the potential impacts were obtained from primary and secondary data such product specification, bill of materials, literature reviews and help of GaBi Software

Oil palm leaf fibre and its suitability for paper-based products

Due to the shortage of wood as origin materials for paper-based production, agro-residue materials have been explored in the quest of finding the best alternative fibre. Oil palm leaf (OPL) is one of agro-residue that has potential due to its comparable characteristics with wood fibre. Studies on chemical compositions, fibre morphology, and mechanical property of OPL have been carried out aiming to evaluate its potential as a substitute raw material for pulp and paper-based production. The chemical compositions were analysed according to the TAPPI standard, Kurscher-Hoffner and chlorite methods accordingly. The mechanical property (tensile, tearing and bursting strengths) were determined as described in TAPPI test methods. Fibre dimensions were determined using Franklin method and analysed under the optical microscope. The content of cellulose in the OPL is determined to be 43.8%. Although, this result is lower than wood fibre (53%), OPL has higher hemicellulose content (36.4%) than the wood fibre (27.5%). In addition, the lignin content (19.7%) of OPL is in the low range of those in wood resources (18 - 25%). These parameters are important components to produce good quality pulp and will provide high mechanical strength of the paper-based products. The measured fibre length of oil palm leaf (1.13 mm) is shorter than the wood fibre (1.90 mm). Meanwhile, the mechanical property of OPL showed lower indexes than wood resources, however, tear (1.80 mN.m2/g) and burst (0.95 kPa.m2/g) indexes of OPL are higher than other published and successful wood resources (Eucalyptus). Based on the analyses, the oil palm leaf is indeed a suitable alternative of raw material for pulp and paper-based industries

Simulation and modeling of the behavior in the four-stroke spark ignition engine by using CFD simulation

Computational fluid dynamics (CFD) is a branch of fluid mechanics that use numerical analysis and data structures to analyze and solves problems that involve fluid flows. CFD have been applied to a wide range of research and engineering problems in many fields of study and industries, including engine and combustion analysis. The objective of this review paper is to analyze the behavior in the four-stroke Spark Ignition (SI) engine by using CFD simulation. To get the require result a few methods have been used to analyze the behavior in the engine such as using CAD geometric model where the solid works software have been prepared. Then, in the CAD geometric model also have ANSYS software to perform analysis in engine module. To predict the behavior of the engine during its working two type of analysis can be performed namely port flow simulation and combustion simulation. So, in first part of this report, the CFD analysis is carried out to analyze the performance parameter, including intake stroke, compression stroke, power stroke and exhaust stroke with hexane fuel combustion. For the results, some details of the engine model and some predicted results including temperature, flow time and pressure profiles. With the existence of CFD simulation it can help many fields of study and industries by predict and analyze the possibility that can be happened in the future. At the same time, serves as a quick and economical way of future engine designs and concepts

Building resilient future: information technology and disaster management - a Malaysian perspective

The recent evets of flooding, earthquakes, uncontrolled wildfires, hurricanes, and deadly storms in world has considered a serious threat to mankind and preparing for devastating disasters has never been more critical and urgent. Emergency Events Database suggests that by year 2050 the damages to flood related incidents to coastal cities will cost near to US$1 trillion. Risk from acts of nature cannot be fully prevented but needs to minimize and safe the innocent lives and property by utilizing disaster management technique to mitigate the losses. This paper presents Information Technologies applications in disaster management phases such as Mitigation, Preparedness, Response and Recovery. Geographic Information System, Remote Sensing, mobile technology, drone, and satellite imagery and MOBILISE analytic platform considered as effective and efficient ways of strengthening resilience when disaster strikes and tremendously helpful for coordinating responses and accelerating the recovery of individuals and communities in the aftermath of recent natural disasters

Design of communication systems based on broadband sources for fiber and free space optical links

[ES] Las comunicaciones ópticas inalámbricas (OWC) constituyen una tecnología muy prometedora para el desarrollo de futuras comunicaciones inalámbricas. De hecho, ha despertado un interés creciente entre los investigadores y varias empresas de todo el mundo trabajan actualmente en el desarrollo de redes inalámbricas de muy alta velocidad. Las comunidades científica e industrial consideran la OWC como una tecnología complementaria en sus diversas formas: comunicaciones ópticas en el espacio libre (FSO), comunicaciones de luz visible (VLC) o fidelidad de la luz (Li-Fi). El espectro óptico ha sido considerado durante muchos años como una gran oportunidad para las comunicaciones inalámbricas, especialmente debido a la saturación del espectro de radiofrecuencia (RF). Esta disertación trata del uso de fuentes de banda ancha en sistemas de transmisión de luz visible (VLC), así como en sistemas de transmisión en el espectro infrarrojo por fibra óptica. En el trabajo de investigación realizado se pueden distinguir tres partes: En la primera parte, se considera el estudio y la simulación de componentes de Diodos Emisores de Luz (LED) con el software WIEN2k centrándose en las propiedades ópticas y eléctricas de los elementos II-VI. La segunda parte trata del diseño, la implementación y las pruebas de diferentes prototipos de comunicación VLC para la transmisión analógica y digital en modo simplex y semidúplex. Hemos demostrado un sistema OWC empleando una fuente de banda ancha (LED) para la transmisión no sólo de datos, sino también para la transmisión inalámbrica de energía. Además, se aborda el problema de la sincronización y la detección del nivel "1" o "0" de un bit en los sistemas de comunicación inalámbrica óptica implementados que surge como consecuencia de la atenuación de la luz a lo largo de la distancia y al problema de la pérdida de línea de visión (NLOS) entre el emisor y el receptor. Para hacer frente a este problema, se ha proporcionado un protocolo de comunicación que garantiza la transmisión fiable de datos digitales con un algoritmo de detección de nivel de bits adaptativo y se ha demostrado su eficacia mediante la transmisión de textos e imágenes. Además, esta tesis aporta una solución para la implementación de transmisores multiplexados en redes con división de longitud de onda (WDM) para formatos de modulación con multiplexación por división de frecuencia ortogonal (OFDM) basados en el uso de fuentes de banda ancha en el espectro infrarrojo para redes de fibra bidireccionales centralizadas. A pesar de las limitaciones impuestas por la dispersión cromática en el uso de este tipo de fuentes ópticas, la inclusión de ciertas estructuras antes de la detección permite la transmisión de señales OFDM en enlaces ópticos. En este trabajo se ha demostrado experimentalmente la reutilización de portadoras, la asignación dinámica de ancho de banda y la transmisión de señales OFDM multibanda mediante el uso de fuentes ópticas de banda ancha en redes WDM. Los principales resultados obtenidos en cada parte de esta tesis doctoral muestran los procedimientos de estudio, la eficacia de las soluciones propuestas y las limitaciones encontradas.[CA] Les comunicacions òptiques sense fils (OWC) constitueixen una tecnologia molt prometedora per al desenvolupament de futures comunicacions sense fils. De fet, ha despertat un interés creixent entre els investigadors i diverses empreses de tot el món treballen actualment en el desenvolupament de xarxes sense fils de molt alta velocitat. Les comunitats científica i industrial consideren la OWC com una tecnologia complementària en les seues diverses formes: comunicacions òptiques en l'espai lliure (FSO), comunicacions de llum visible (VLC) o fidelitat de la llum (Li-Fi). L'espectre òptic ha sigut considerat durant molts anys com una gran oportunitat per a les comunicacions sense fils, especialment a causa de la saturació de l'espectre de radiofreqüència (RF). Aquesta dissertació tracta de l'ús de fonts de banda ampla en sistemes de transmissió de llum visible (VLC), així com en sistemes de transmissió en l'espectre infraroig per fibra òptica. En el treball de recerca realitzat es poden distingir tres parts: ¿ En la primera part, es considera l'estudi i la simulació de components de Díodes Emissors de Llum (LED) amb el software WIEN2k centrant-se en les propietats òptiques i elèctriques dels elements II-VI. ¿ La segona part tracta del disseny, la implementació i les proves de diferents prototips de comunicació VLC per a la transmissió analògica i digital de manera simplex i semidúplex. Hem demostrat un sistema OWC emprant una font de banda ampla (LED) per a la transmissió no sols de dades, sinó també per a la transmissió sense fil d'energia. A més, s'aborda el problema de la sincronització i la detecció del nivell "1" o "0" d'un bit en els sistemes de comunicació sense fil òptica implementats, que sorgeix a conseqüència de l'atenuació de la llum al llarg de la distància i al problema de la pèrdua de línia de visió (NLOS) entre l'emissor i el receptor. Per a fer front a aquest problema, s'ha proporcionat un protocol de comunicació que garanteix la transmissió fiable de dades digitals amb un algorisme de detecció de nivell de bits adaptatiu i s'ha demostrat la seua eficàcia mitjançant la transmissió de textos i imatges. ¿ A més, aquesta tesi aporta una solució per a la implementació de transmissors multiplexats en xarxes amb divisió de longitud d'ona (WDM) per a formats de modulació amb multiplexació per divisió de freqüència ortogonal (OFDM) basats en l'ús de fonts de banda ampla en l'espectre infraroig per a xarxes de fibra bidireccionals centralitzades. Malgrat les limitacions imposades per la dispersió cromàtica en l'ús d'aquest tipus de fonts òptiques, la inclusió d'unes certes estructures abans de la detecció permet la transmissió de senyals OFDM en enllaços òptics. En aquest treball s'ha demostrat experimentalment la reutilització de portadores, l'assignació dinàmica d'amplada de banda i la transmissió de senyals OFDM multibanda mitjançant l'ús de fonts òptiques de banda ampla en xarxes WDM. Els principals resultats obtinguts en cada part d'aquesta tesi doctoral mostren els procediments d'estudi, l'eficàcia de les solucions proposades i les limitacions trobades.[EN] Optical wireless communication (OWC) is a very promising technology for future wireless communications developments. It has attracted increasing interest from researchers and several companies around the world are currently working on the development of very high-speed wireless networks. The scientific and industrial communities believe that OWC will be a complementary technology in its various forms: Free Space Optical communications (FSO), Visible Light Communications (VLC), Light Fidelity (Li-Fi). In fact, the optical spectrum has been considered for many years as a great opportunity for wireless communications especially due to the saturation of the radio frequency (RF) spectrum. This dissertation deals with the use of broadband sources in visible light transmission systems (VLC) as well as fiber optic systems. To carry out the research, three parts can be distinguished: In the first part, we consider the study and simulation of Light Emitting Diode (LED) components with the WIEN2k software by focusing on the optical and electrical properties of elements II-VI. The second part deals with the design, implementation and testing of different VLC communication prototypes for analog and digital transmission in simplex and half-duplex mode. We have demonstrated that an OWC system using a broadband source (i.e. an LED) can be used not only for data transmission, but also for wireless power transmission. Moreover, the synchronization problem and the detection of level "1" or "0" of a bit often arise in the optical wireless communication systems. This is a result of the attenuation nature of the light over the distance and the problem of Non Line-Of-Sight (NLOS) between the emitter and the receiver. To deal with this problem, a communication protocol ensuring reliable digital data transmission with an adaptive bit level detection algorithm has been provided and its effectiveness has been demonstrated by the transmission of texts and images. In addition, this thesis provides a solution for the implementation of wavelength division multiplexed - orthogonal frequency division multiplexed (WDM-OFDM) transmitters based on the use of broadband sources in the infrared spectrum for centralized bidirectional fiber networks. Despite the chromatic dispersion that avoids the use of this type of optical sources, the inclusion of certain structures before detection allows the transmission of OFDM signals in optical links. Carrier reuse, dynamic bandwidth allocation and multiband OFDM signals transmission will be experimentally demonstrated by using optical broadband sources in WDM networks. The main results obtained during this thesis work demonstrate the study procedures, for each part, the effectiveness of the proposed solutions as well as the constraints encountered.Sekkiou, I. (2021). Design of communication systems based on broadband sources for fiber and free space optical links [Tesis doctoral]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/172542TESI