19,956 research outputs found

    Cymantrene–Triazole "Click" Products: Structural Characterization and Electrochemical Properties

    Get PDF
    We report the first known examples of triazole-derivatized cymantrene complexes (η5-[4-substituted triazol-1-yl]cyclopentadienyl)tricarbonylmanganese(I), obtained via a “click” chemical synthesis, bearing a phenyl, 3-aminophenyl, or 4-aminophenyl moiety at the 4-position of the triazole ring. Structural characterization data using multinuclear NMR, UV–vis, ATR-IR, and mass spectrometric methods are provided, as well as crystallographic data for (η5-[4-phenyltriazol-1-yl]cyclopentadienyl)tricarbonylmanganese(I) and (η5-[4-(3-aminophenyl)triazol-1-yl]cyclopentadienyl)tricarbonylmanganese(I). Cyclic voltammetric characterization of the redox behavior of each of the three cymantrene–triazole complexes is presented together with digital simulations, in situ infrared spectroelectrochemistry, and DFT calculations to extract the associated kinetic and thermodynamic parameters. The trypanocidal activity of each cymantrene–triazole complex is also examined, and these complexes are found to be more active than cymantrene alone

    Synthesis of 1,4-Disubstituted Mono and Bis-triazolocarbo-acyclonucleoside Analogues of 9-(4-Hydroxybutyl)guanine by Cu(I)-Catalyzed Click Azide-Alkyne Cycloaddition

    Get PDF
    A series of novel mono-1,2,3-triazole and bis-1,2,3-triazole acyclonucleoside analogues of 9-(4-hydroxybutyl)guanine was prepared via copper(I)-catalyzed 1,3-dipolar cycloaddition of N-9 propargylpurine, N-1-propargylpyrimidines/as-triazine with the azido-pseudo-sugar 4-azidobutylacetate under solvent-free microwave conditions, followed by treatment with K2CO3/MeOH, or NH3/MeOH. All compounds studied in this work were screened for their antiviral activities [against human rhinovirus (HRV) and hepatitis C virus (HCV)] and antibacterial activities against a series of Gram positive and negative bacteria

    Determination of the Primary Molecular Target of 1,2,4-Triazole-Ciprofloxacin Hybrids

    Get PDF
    We have synthesized and examined the antibacterial activity, toxicity and affinity towards bacterial type II topoisomerases of a series of 1,2,4-triazole-ciprofloxacin hybrids. A number of these compounds displayed enhanced activity against Gram-positive and Gram-negative bacteria when compared to ciprofloxacin. The toxic concentrations of the obtained derivatives, evaluated on HEK-293 cells using MTT assay, were much higher than concentrations required to produce antibacterial effect. Finally, the results of enzymatic studies showed that the analyzed compounds demonstrated other preferences as regards primary and secondary molecular targets than ciprofloxacin.This research was supported by the Ministry of Science and Higher Education under Iuventus Plus grant No. IP2014 037473. Tomasz Plech is a recipient of the Fellowship for Young Researchers with Outstanding Scientific Achievements from the Medical University of Lublin (Lublin, Poland)

    (E)-2-(4-Arylbut-1-en-3-yn-1-yl)chromones as synthons for the synthesis of xanthone-1,2,3-triazole dyads

    Get PDF
    Xanthone-1,2,3-triazole dyads have been synthesized by two different approaches, both starting from novel (E)-2-(4-arylbut-1-en-3-yn-1-yl)chromones, prepared through a base-catalyzed aldol reaction of 2-methylchromone and arylpropargyl aldehydes. In the first method, the xanthone moiety is built by Diels-Alder reaction of the referred unsaturated chromones with N-methylmaleimide under microwave irradiation, followed by oxidation of the obtained adducts with DDQ, whereas the 1,2,3-triazole ring results from the cycloaddition reaction of the acetylene moiety with sodium azide. The second strategy first involves the cycloaddition reaction with sodium azide to provide the 1,2,3-triazole ring, followed by methylation of the triazole NH group prior to Diels-Alder reaction with N-methylmaleimide. The last step in this synthesis of novel xanthone-1,2,3-triazole dyads entails oxidation of the cycloadducts with DDQ

    weak intermolecular interactions and catalytic ethylene oligomerisation

    Get PDF
    The ligands 1-(cyclohexyl)-4-(2-pyridyl)-1,2,3-triazole (1), 1-(2,6-diisopropylphenyl)-4-(2-pyridyl)-1,2,3-triazole (2), 1-(4-butoxyphenyl)-4-(2-pyridyl)-1,2,3-triazole (3) and 1-(methyl)-4-(2-pyridyl)-1,2,3-triazole (4) were synthesized by the Cu(I) catalyzed “Click” reaction between 2-pyridylacetylene and the corresponding azides. The ligands were then reacted with NiBr2·3H2O to generate the complexes (1)2NiBr2 (1a), (2)2NiBr2 (2a), (3)2NiBr2 (3a) and (4)2NiBr2 (4a). Structural characterization of 1a confirmed the mononuclear and distorted octahedral environment around the Ni(II) center, with the pyridyl-triazole ligands coordinating in a bis-chelating fashion. Bond length analysis inside the 1,2,3-triazole ring shows a short N[double bond, length as m-dash]N double bond that is flanked by two longer C–N and N–N bonds pointing to the existence of “azo” character in the ring. The highly polar five-membered 1,2,3-triazole ring makes its C–H bond acidic, and these bonds participate in an extended weak intermolecular C–HBr interactions with the Br-groups of neighboring molecules, resulting in a 3-D network. The nickel complexes with these “Click” ligands were tested as pre-catalysts for ethylene oligomerization, and the complexes showed moderate activity in that reaction with good selectivity towards C4 oligomers

    Poly(1-vinyl-1,2,4-triazolium) poly(ionic liquid)s: synthesis and the unique behavior in loading metal ions

    Full text link
    Herein we report the synthesis of a series of poly(4-alkyl-1-vinyl-1,2,4-triazolium) poly(ionic liquid)s either via straightforward free radical polymerization of their corresponding ionic liquid monomers, or via anion metathesis of the polymer precursors bearing halide as counter anion. The ionic liquid monomers were first prepared via N-alkylation reaction of commercially available 1-vinyl-1,2,4-triazole with alkyl iodides, followed by anion metathesis with targeted fluorinated anions. The thermal properties and solubilities of these poly(ionic liquid)s have been systematically investigated. Interestingly, it was found that the poly(4-ethyl-1-vinyl-1,2,4-triazolium) poly(ionic liquid) exhibited an improved loading capacity of transition metal ions in comparison with its imidazolium counterpart.Comment: 18 pages, 9 figure

    Triazole-Directed Pd-Catalyzed C(sp2)–H Oxygenation of Arenes and Alkenes

    Get PDF
    Selective Pd-catalyzed C(sp2)–H oxygenation of 4-substituted 1,2,3-triazoles is described. Unlike previous metal-catalyzed C–H functionalization events, which preferentially occur at the activated heterocyclic C–H bond, the regioselective oxygenation of the arene/alkene moiety is now achieved featuring the unconventional role of a simple triazole scaffold as a modular and selective directing group.MINECO for a Ramon y Cajal research contract (RYC-2012-09873)

    Modulation of internuclear communication in multinuclear Ruthenium(II) polypyridyl complexes

    Get PDF
    The syntheses and characterisation of a series of mononuclear and dinuclear ruthenium polypyridyl complexes based on the bridging ligands 1,3-bis-[5-(2-pyridyl)-1H-1,2,4-triazol-3-yl]benzene, 1,4-bis-[5-(2-pyridyl)-1H-1,2,4-triazol-3-yl]benzene, 2,5-bis-[5-(2-pyridyl)-1H-1,2,4-triazol-3-yl]thiophene, 2,5-bis-[5-pyrazinyl-1H-1,2,4-triazol-3-yl]thiophene are reported. Electrochemical studies indicate that in these systems, the ground state interaction is critically dependent on the nature of the bridging ligand and its protonation state, with strong and weak interactions being observed for thiophene- and phenylene-bridged complexes, respectively

    Coordinatively unsaturated ruthenium complexes as efficient alkyne-azide cycloaddition catalysts

    Get PDF
    The performance of 16-electron ruthenium complexes with the general formula Cp*Ru(L)X (in which L = phosphine or N-heterocyclic carbene ligand; X = Cl or OCH2CF3) was explored in azide−alkyne cycloaddition reactions that afford the 1,2,3- triazole products. The scope of the Cp*Ru(PiPr3)Cl precatalyst was investigated for terminal alkynes leading to new 1,5-disubstituted 1,2,3-triazoles in high yields. Mechanistic studies were conducted and revealed a number of proposed intermediates. Cp*Ru- (PiPr3)(η2-HCCPh)Cl was observed and characterized by 1H, 13C, and 31P NMR at temperatures between 273 and 213 K. A rare example of N,N-κ2-phosphazide complex, Cp*Ru(κ2-iPr3PN3Bn)Cl, was fully characterized, and a single-crystal X-ray diffraction structure was obtained. DFT calculations describe a complete map of the catalytic reactivity with phenylacetylene and/or benzylazide.Publisher PDFPeer reviewe

    Simple oxidation of pyrimidinylhydrazones to triazolopyrimidines and their inhibition of Shiga toxin trafficking

    Get PDF
    The oxidative cyclisation of a range of benzothieno[2,3-d]pyrimidine hydrazones (7a–j) to the 1,2,4-triazolo[4,3-c]pyrimidines (8a–j) catalysed by lithium iodide or to the 1,2,4-triazolo[1,5-c]pyrimidines (10a–j) with sodium carbonate is presented. A complementary synthesis of the 1,2,4-triazolo[1,5-c]pyrimidines starting from the amino imine 11 is also reported. The effect of these compounds on Shiga toxin (STx) trafficking in HeLa cells and comparison to the previously reported Exo2 is also detailed
    corecore