49,128 research outputs found

    Agile load transportation systems using aerial robots

    Get PDF
    In this dissertation, we address problems that can occur during load transport using aerial robots, i.e., small scale quadrotors. First, detailed models of such transportation system are derived. These models include nonlinear models of a quadrotor, a model of a quadrotor carrying a fixed load and a model of a quadrotor carrying a suspended load. Second, the problem of quadrotor stabilization and trajectory tracking with changes of the center of gravity of the transportation system is addressed. This problem is solved using model reference adaptive control based on output feedback linearization that compensates for dynamical changes in the center of gravity of the quadrotor. The third problem we address is a problem of a swing-free transport of suspended load using quadrotors. Flying with a suspended load can be a very challenging and sometimes hazardous task as the suspended load significantly alters the flight characteristics of the quadrotor. In order to deal with suspended load flight, we present a method based on dynamic programming which is a model based offline method. The second investigated method we use is based on the Nelder-Mead algorithm which is an optimization technique used for nonlinear unconstrained optimization problems. This method is model free and it can be used for offline or online generation of the swing-free trajectories for the suspended load. Besides the swing-free maneuvers with suspended load, load trajectory tracking is another problem we solve in this dissertation. In order to solve this problem we use a Nelder-Mead based algorithm. In addition, we use an online least square policy iteration algorithm. At the end, we propose a high level algorithm for navigation in cluttered environments considering a quadrotor with suspended load. Furthermore, distributed control of multiple quadrotors with suspended load is addressed too. The proposed hierarchical architecture presented in this doctoral dissertation is an important step towards developing the next generation of agile autonomous aerial vehicles. These control algorithms enable quadrotors to display agile maneuvers while reconfiguring in real time whenever a change in the center of gravity occurs. This enables a swing-free load transport or trajectory tracking of the load in urban environments in a decentralized fashion

    Piloted simulation of an air-ground profile negotiation process in a time-based Air Traffic Control environment

    Get PDF
    Historically, development of airborne flight management systems (FMS) and ground-based air traffic control (ATC) systems has tended to focus on different objectives with little consideration for operational integration. A joint program, between NASA's Ames Research Center (Ames) and Langley Research Center (Langley), is underway to investigate the issues of, and develop systems for, the integration of ATC and airborne automation systems. A simulation study was conducted to evaluate a profile negotiation process (PNP) between the Center/TRACON Automation System (CTAS) and an aircraft equipped with a four-dimensional flight management system (4D FMS). Prototype procedures were developed to support the functional implementation of this process. The PNP was designed to provide an arrival trajectory solution which satisfies the separation requirements of ATC while remaining as close as possible to the aircraft's preferred trajectory. Results from the experiment indicate the potential for successful incorporation of aircraft-preferred arrival trajectories in the CTAS automation environment. Fuel savings on the order of 2 percent to 8 percent, compared to fuel required for the baseline CTAS arrival speed strategy, were achieved in the test scenarios. The data link procedures and clearances developed for this experiment, while providing the necessary functionality, were found to be operationally unacceptable to the pilots. In particular, additional pilot control and understanding of the proposed aircraft-preferred trajectory, and a simplified clearance procedure were cited as necessary for operational implementation of the concept

    Airborne Four-Dimensional Flight Management in a Time-based Air Traffic Control Environment

    Get PDF
    Advanced Air Traffic Control (ATC) systems are being developed which contain time-based (4D) trajectory predictions of aircraft. Airborne flight management systems (FMS) exist or are being developed with similar 4D trajectory generation capabilities. Differences between the ATC generated profiles and those generated by the airborne 4D FMS may introduce system problems. A simulation experiment was conducted to explore integration of a 4D equipped aircraft into a 4D ATC system. The NASA Langley Transport Systems Research Vehicle cockpit simulator was linked in real time to the NASA Ames Descent Advisor ATC simulation for this effort. Candidate procedures for handling 4D equipped aircraft were devised and traffic scenarios established which required time delays absorbed through speed control alone or in combination with path stretching. Dissimilarities in 4D speed strategies between airborne and ATC generated trajectories were tested in these scenarios. The 4D procedures and FMS operation were well received by airline pilot test subjects, who achieved an arrival accuracy at the metering fix of 2.9 seconds standard deviation time error. The amount and nature of the information transmitted during a time clearance were found to be somewhat of a problem using the voice radio communication channel. Dissimilarities between airborne and ATC-generated speed strategies were found to be a problem when the traffic remained on established routes. It was more efficient for 4D equipped aircraft to fly trajectories with similar, though less fuel efficient, speeds which conform to the ATC strategy. Heavy traffic conditions, where time delays forced off-route path stretching, were found to produce a potential operational benefit of the airborne 4D FMS

    Pattern-Based Genetic Algorithm for Airborne Conflict Resolution

    Get PDF
    NASA has developed the Autonomous Operations Planner (AOP) airborne decision support tool to explore advanced air traffic control concepts that include delegating separation authority to aircraft. A key element of the AOP is its strategic conflict resolution (CR) algorithm, which must resolve conflicts while maintaining conformance with traffic flow management constraints. While a previous CR algorithm, which focused on broader flight plan optimization objectives as a part of conflict resolution, had successfully been developed, new research has identified the need for resolution routes the users find more acceptable (i.e., simpler and more intuitive). A new CR algorithm is presented that uses a combination of pattern-based maneuvers and a genetic algorithm to achieve these new objectives. Several lateral and vertical maneuver patterns are defined and the application of the genetic algorithm explained. A new approach to defining a conflicted fitness function using estimates of the local conflict region around a conflicted trajectory is also presented. Preliminary performance characteristics of the implemented algorithm are provided

    Manual Control Aspects of Orbital Flight

    Get PDF
    A brief description of several laboratories' current research in the general area of manual control of orbital flight is presented. With an operational-space-station era (and its increased traffic levels) approaching, now is an opportune time to investigate issues such as docking and rendezvous profiles and course-planning aids. The tremendous increase in the capabilities of computers and computer graphics has made extensive study possible and economical. It is time to study these areas, from a human factors and manual control perspective in order to preclude the occurrence of problems analogous to those that occurred in the airline and other related industries

    Hypersonic Research Vehicle (HRV) real-time flight test support feasibility and requirements study. Part 2: Remote computation support for flight systems functions

    Get PDF
    The requirements are assessed for the use of remote computation to support HRV flight testing. First, remote computational requirements were developed to support functions that will eventually be performed onboard operational vehicles of this type. These functions which either cannot be performed onboard in the time frame of initial HRV flight test programs because the technology of airborne computers will not be sufficiently advanced to support the computational loads required, or it is not desirable to perform the functions onboard in the flight test program for other reasons. Second, remote computational support either required or highly desirable to conduct flight testing itself was addressed. The use is proposed of an Automated Flight Management System which is described in conceptual detail. Third, autonomous operations is discussed and finally, unmanned operations

    An integrated Rotorcraft Avionics/Controls Architecture to support advanced controls and low-altitude guidance flight research

    Get PDF
    Salient design features of a new NASA/Army research rotorcraft--the Rotorcraft-Aircrew Systems Concepts Airborne Laboratory (RASCAL) are described. Using a UH-60A Black Hawk helicopter as a baseline vehicle, the RASCAL will be a flying laboratory capable of supporting the research requirements of major NASA and Army guidance, control, and display research programs. The paper describes the research facility requirements of these programs together with other critical constraints on the design of the research system. Research program schedules demand a phased development approach, wherein specific research capability milestones are met and flight research projects are flown throughout the complete development cycle of the RASCAL. This development approach is summarized, and selected features of the research system are described. The research system includes a real-time obstacle detection and avoidance system which will generate low-altitude guidance commands to the pilot on a wide field-of-view, color helmet-mounted display and a full-authority, programmable, fault-tolerant/fail-safe, fly-by-wire flight control system

    Autonomous flight and remote site landing guidance research for helicopters

    Get PDF
    Automated low-altitude flight and landing in remote areas within a civilian environment are investigated, where initial cost, ongoing maintenance costs, and system productivity are important considerations. An approach has been taken which has: (1) utilized those technologies developed for military applications which are directly transferable to a civilian mission; (2) exploited and developed technology areas where new methods or concepts are required; and (3) undertaken research with the potential to lead to innovative methods or concepts required to achieve a manual and fully automatic remote area low-altitude and landing capability. The project has resulted in a definition of system operational concept that includes a sensor subsystem, a sensor fusion/feature extraction capability, and a guidance and control law concept. These subsystem concepts have been developed to sufficient depth to enable further exploration within the NASA simulation environment, and to support programs leading to the flight test
    corecore