5,521 research outputs found
A high speed Tri-Vision system for automotive applications
Purpose: Cameras are excellent ways of non-invasively monitoring the interior and exterior of vehicles. In particular, high speed stereovision and multivision systems are important for transport applications such as driver eye tracking or collision avoidance. This paper addresses the synchronisation problem which arises when multivision camera systems are used to capture the high speed motion common in such applications.
Methods: An experimental, high-speed tri-vision camera system intended for real-time driver eye-blink and saccade measurement was designed, developed, implemented and tested using prototype, ultra-high dynamic range, automotive-grade image sensors specifically developed by E2V (formerly Atmel) Grenoble SA as part of the European FP6 project – sensation (advanced sensor development for attention stress, vigilance and sleep/wakefulness monitoring).
Results : The developed system can sustain frame rates of 59.8 Hz at the full stereovision resolution of 1280 × 480 but this can reach 750 Hz when a 10 k pixel Region of Interest (ROI) is used, with a maximum global shutter speed of 1/48000 s and a shutter efficiency of 99.7%. The data can be reliably transmitted uncompressed over standard copper Camera-Link® cables over 5 metres. The synchronisation error between the left and right stereo images is less than 100 ps and this has been verified both electrically and optically. Synchronisation is automatically established at boot-up and maintained during resolution changes. A third camera in the set can be configured independently. The dynamic range of the 10bit sensors exceeds 123 dB with a spectral sensitivity extending well into the infra-red range.
Conclusion: The system was subjected to a comprehensive testing protocol, which confirms that the salient requirements for the driver monitoring application are adequately met and in some respects, exceeded. The synchronisation technique presented may also benefit several other automotive stereovision applications including near and far-field obstacle detection and collision avoidance, road condition monitoring and others.Partially funded by the EU FP6 through the IST-507231 SENSATION project.peer-reviewe
The highD Dataset: A Drone Dataset of Naturalistic Vehicle Trajectories on German Highways for Validation of Highly Automated Driving Systems
Scenario-based testing for the safety validation of highly automated vehicles
is a promising approach that is being examined in research and industry. This
approach heavily relies on data from real-world scenarios to derive the
necessary scenario information for testing. Measurement data should be
collected at a reasonable effort, contain naturalistic behavior of road users
and include all data relevant for a description of the identified scenarios in
sufficient quality. However, the current measurement methods fail to meet at
least one of the requirements. Thus, we propose a novel method to measure data
from an aerial perspective for scenario-based validation fulfilling the
mentioned requirements. Furthermore, we provide a large-scale naturalistic
vehicle trajectory dataset from German highways called highD. We evaluate the
data in terms of quantity, variety and contained scenarios. Our dataset
consists of 16.5 hours of measurements from six locations with 110 000
vehicles, a total driven distance of 45 000 km and 5600 recorded complete lane
changes. The highD dataset is available online at: http://www.highD-dataset.comComment: IEEE International Conference on Intelligent Transportation Systems
(ITSC) 201
Satellite Navigation for the Age of Autonomy
Global Navigation Satellite Systems (GNSS) brought navigation to the masses.
Coupled with smartphones, the blue dot in the palm of our hands has forever
changed the way we interact with the world. Looking forward, cyber-physical
systems such as self-driving cars and aerial mobility are pushing the limits of
what localization technologies including GNSS can provide. This autonomous
revolution requires a solution that supports safety-critical operation,
centimeter positioning, and cyber-security for millions of users. To meet these
demands, we propose a navigation service from Low Earth Orbiting (LEO)
satellites which deliver precision in-part through faster motion, higher power
signals for added robustness to interference, constellation autonomous
integrity monitoring for integrity, and encryption / authentication for
resistance to spoofing attacks. This paradigm is enabled by the 'New Space'
movement, where highly capable satellites and components are now built on
assembly lines and launch costs have decreased by more than tenfold. Such a
ubiquitous positioning service enables a consistent and secure standard where
trustworthy information can be validated and shared, extending the electronic
horizon from sensor line of sight to an entire city. This enables the
situational awareness needed for true safe operation to support autonomy at
scale.Comment: 11 pages, 8 figures, 2020 IEEE/ION Position, Location and Navigation
Symposium (PLANS
VANET Applications: Hot Use Cases
Current challenges of car manufacturers are to make roads safe, to achieve
free flowing traffic with few congestions, and to reduce pollution by an
effective fuel use. To reach these goals, many improvements are performed
in-car, but more and more approaches rely on connected cars with communication
capabilities between cars, with an infrastructure, or with IoT devices.
Monitoring and coordinating vehicles allow then to compute intelligent ways of
transportation. Connected cars have introduced a new way of thinking cars - not
only as a mean for a driver to go from A to B, but as smart cars - a user
extension like the smartphone today. In this report, we introduce concepts and
specific vocabulary in order to classify current innovations or ideas on the
emerging topic of smart car. We present a graphical categorization showing this
evolution in function of the societal evolution. Different perspectives are
adopted: a vehicle-centric view, a vehicle-network view, and a user-centric
view; described by simple and complex use-cases and illustrated by a list of
emerging and current projects from the academic and industrial worlds. We
identified an empty space in innovation between the user and his car:
paradoxically even if they are both in interaction, they are separated through
different application uses. Future challenge is to interlace social concerns of
the user within an intelligent and efficient driving
IoT-Based Vehicle Monitoring and Driver Assistance System Framework for Safety and Smart Fleet Management
Curbing road accidents has always been one of the utmost priorities in every country. In Malaysia, Traffic Investigation and Enforcement Department reported that Malaysia’s total number of road accidents has increased from 373,071 to 533,875 in the last decade. One of the significant causes of road accidents is driver’s behaviours. However, drivers’ behaviour was challenging to regulate by the enforcement team or fleet operators, especially heavy vehicles. We proposed adopting the Internet of Things (IoT) and its’ emerging technologies to monitor and alert driver’s behavioural and driving patterns in reducing road accidents. In this work, we proposed a lane tracking and iris detection algorithm to monitor and alert the driver’s behaviour when the vehicle sways away from the lane and the driver feeling drowsy, respectively. We implemented electronic devices such as cameras, a global positioning system module, a global system communication module, and a microcontroller as an intelligent transportation system in the vehicle. We implemented face recognition for person identification using the same in-vehicle camera and recorded the working duration for authentication and operation health monitoring, respectively. With the GPS module, we monitored and alerted against permissible vehicle’s speed accordingly. We integrated IoT on the system for the fleet centre to monitor and alert the driver’s behavioural activities in real-time through the user access portal. We validated it successfully on Malaysian roads. The outcome of this pilot project benefits the safety of drivers, public road users, and passengers. The impact of this framework leads to a new regulation by the government agencies towards merit and demerit system, real-time fleet monitoring of intelligent transportation systems, and socio-economy such as cheaper health premiums. The big data can be used to predict the driver’s behavioural in the future
IoT-Based Vehicle Monitoring and Driver Assistance System Framework for Safety and Smart Fleet Management
Curbing road accidents has always been one of the utmost priorities in every country. In Malaysia, Traffic Investigation and Enforcement Department reported that Malaysia’s total number of road accidents has increased from 373,071 to 533,875 in the last decade. One of the significant causes of road accidents is driver’s behaviours. However, drivers’ behaviour was challenging to regulate by the enforcement team or fleet operators, especially heavy vehicles. We proposed adopting the Internet of Things (IoT) and its’ emerging technologies to monitor and alert driver’s behavioural and driving patterns in reducing road accidents. In this work, we proposed a lane tracking and iris detection algorithm to monitor and alert the driver’s behaviour when the vehicle sways away from the lane and the driver feeling drowsy, respectively. We implemented electronic devices such as cameras, a global positioning system module, a global system communication module, and a microcontroller as an intelligent transportation system in the vehicle. We implemented face recognition for person identification using the same in-vehicle camera and recorded the working duration for authentication and operation health monitoring, respectively. With the GPS module, we monitored and alerted against permissible vehicle’s speed accordingly. We integrated IoT on the system for the fleet centre to monitor and alert the driver’s behavioural activities in real-time through the user access portal. We validated it successfully on Malaysian roads. The outcome of this pilot project benefits the safety of drivers, public road users, and passengers. The impact of this framework leads to a new regulation by the government agencies towards merit and demerit system, real-time fleet monitoring of intelligent transportation systems, and socio-economy such as cheaper health premiums. The big data can be used to predict the driver’s behavioural in the future
An integrated low-cost road traffic and air pollution monitoring platform for next citizen observatories
Abstract An integrated monitoring platform was developed for real-time monitoring of air pollution and traffic flows in urban areas. The air quality monitoring unit, integrating the "Arduino" open-source technology with low-cost and high-resolution sensors, collects concentrations of CO, NO 2 and CO 2 . The traffic monitoring device, equipped with a camera sensor and a video analysis software, collects vehicles' counts, speed and size. Air pollution and traffic readings are archived on a spatial data infrastructure composed of a central GeoDatabase, a GIS engine, and a web interface. A platform's description and the results of its installation in Florence (Italy) are presented
- …