961 research outputs found
Multipath routing and QoS provisioning in mobile ad hoc networks
PhDA Mobile Ad Hoc Networks (MANET) is a collection of mobile nodes that can
communicate with each other using multihop wireless links without utilizing any
fixed based-station infrastructure and centralized management. Each mobile node
in the network acts as both a host generating flows or being destination of flows
and a router forwarding flows directed to other nodes.
Future applications of MANETs are expected to be based on all-IP
architecture and be capable of carrying multitude real-time multimedia
applications such as voice and video as well as data. It is very necessary for
MANETs to have an efficient routing and quality of service (QoS) mechanism to
support diverse applications.
This thesis proposes an on-demand Node-Disjoint Multipath Routing protocol
(NDMR) with low broadcast redundancy. Multipath routing allows the
establishment of multiple paths between a single source and single destination
node. It is also beneficial to avoid traffic congestion and frequent link breaks in
communication because of the mobility of nodes. The important components of
the protocol, such as path accumulation, decreasing routing overhead and
selecting node-disjoint paths, are explained. Because the new protocol
significantly reduces the total number of Route Request packets, this results in an
increased delivery ratio, smaller end-to-end delays for data packets, lower control
overhead and fewer collisions of packets.
Although NDMR provides node-disjoint multipath routing with low route
overhead in MANETs, it is only a best-effort routing approach, which is not
enough to support QoS. DiffServ is a standard approach for a more scalable way
to achieve QoS in any IP network and could potentially be used to provide QoS
in MANETs because it minimises the need for signalling. However, one of the
biggest drawbacks of DiffServ is that the QoS provisioning is separate from the
routing process. This thesis presents a Multipath QoS Routing protocol for
iv
supporting DiffServ (MQRD), which combines the advantages of NDMR and
DiffServ. The protocol can classify network traffic into different priority levels
and apply priority scheduling and queuing management mechanisms to obtain
QoS guarantees
Wireless industrial monitoring and control networks: the journey so far and the road ahead
While traditional wired communication technologies have played a crucial role in industrial monitoring and control networks over the past few decades, they are increasingly proving to be inadequate to meet the highly dynamic and stringent demands of today’s industrial applications, primarily due to the very rigid nature of wired infrastructures. Wireless technology, however, through its increased pervasiveness, has the potential to revolutionize the industry, not only by mitigating the problems faced by wired solutions, but also by introducing a completely new class of applications. While present day wireless technologies made some preliminary inroads in the monitoring domain, they still have severe limitations especially when real-time, reliable distributed control operations are concerned. This article provides the reader with an overview of existing wireless technologies commonly used in the monitoring and control industry. It highlights the pros and cons of each technology and assesses the degree to which each technology is able to meet the stringent demands of industrial monitoring and control networks. Additionally, it summarizes mechanisms proposed by academia, especially serving critical applications by addressing the real-time and reliability requirements of industrial process automation. The article also describes certain key research problems from the physical layer communication for sensor networks and the wireless networking perspective that have yet to be addressed to allow the successful use of wireless technologies in industrial monitoring and control networks
Recommended from our members
Multimedia delivery in the future internet
The term “Networked Media” implies that all kinds of media including text, image, 3D graphics, audio
and video are produced, distributed, shared, managed and consumed on-line through various networks,
like the Internet, Fiber, WiFi, WiMAX, GPRS, 3G and so on, in a convergent manner [1]. This white
paper is the contribution of the Media Delivery Platform (MDP) cluster and aims to cover the Networked
challenges of the Networked Media in the transition to the Future of the Internet.
Internet has evolved and changed the way we work and live. End users of the Internet have been confronted
with a bewildering range of media, services and applications and of technological innovations concerning
media formats, wireless networks, terminal types and capabilities. And there is little evidence that the pace
of this innovation is slowing. Today, over one billion of users access the Internet on regular basis, more
than 100 million users have downloaded at least one (multi)media file and over 47 millions of them do so
regularly, searching in more than 160 Exabytes1 of content. In the near future these numbers are expected
to exponentially rise. It is expected that the Internet content will be increased by at least a factor of 6, rising
to more than 990 Exabytes before 2012, fuelled mainly by the users themselves. Moreover, it is envisaged
that in a near- to mid-term future, the Internet will provide the means to share and distribute (new)
multimedia content and services with superior quality and striking flexibility, in a trusted and personalized
way, improving citizens’ quality of life, working conditions, edutainment and safety.
In this evolving environment, new transport protocols, new multimedia encoding schemes, cross-layer inthe
network adaptation, machine-to-machine communication (including RFIDs), rich 3D content as well as
community networks and the use of peer-to-peer (P2P) overlays are expected to generate new models of
interaction and cooperation, and be able to support enhanced perceived quality-of-experience (PQoE) and
innovative applications “on the move”, like virtual collaboration environments, personalised services/
media, virtual sport groups, on-line gaming, edutainment. In this context, the interaction with content
combined with interactive/multimedia search capabilities across distributed repositories, opportunistic P2P
networks and the dynamic adaptation to the characteristics of diverse mobile terminals are expected to
contribute towards such a vision.
Based on work that has taken place in a number of EC co-funded projects, in Framework Program 6 (FP6)
and Framework Program 7 (FP7), a group of experts and technology visionaries have voluntarily
contributed in this white paper aiming to describe the status, the state-of-the art, the challenges and the way
ahead in the area of Content Aware media delivery platforms
Leveraging synergy of SDWN and multi-layer resource management for 5G networks
Fifth-generation (5G) networks are envisioned to predispose service-oriented and flexible edge-to-core infrastructure to offer diverse applications. Convergence of software-defined networking (SDN), software-defined radio (SDR), and virtualization on the concept of software-defined wireless networking (SDWN) is a promising approach to support such dynamic networks. The principal technique behind the 5G-SDWN framework is the separation of control and data planes, from deep core entities to
edge wireless access points. This separation allows the abstraction of resources as transmission parameters of users. In such
user-centric and service-oriented environment, resource management plays a critical role to achieve efficiency and reliability. In this paper, we introduce a converged multi-layer resource management (CML-RM) framework for SDWN-enabled 5G networks, that involves a functional model and an optimization framework. In such framework, the key questions are if 5G-SDWN can be leveraged to enable CML-RM over the portfolio of resources, and reciprocally, if CML-RM can effectively provide performance
enhancement and reliability for 5G-SDWN. In this paper, we tackle these questions by proposing a flexible protocol structure for 5G-SDWN, which can handle all the required functionalities in a more cross-layer manner. Based on this, we demonstrate how the proposed general framework of CML-RM can control the end-user quality of experience. Moreover, for two scenarios of 5G-SDWN, we investigate the effects of joint user-association and resource allocation via CML-RM to improve performance in
virtualized networks
A Review on Provisioning Quality of Service of Wireless Telemedicine for E-Health Services
In general, on-line medical consultation reduces time required for medical consultation induces
improvement in the quality and efficiency of healthcare services. All major types of current e-health applications such as ECG, X-ray, video, diagnosis images and other common applications have been included in the scope of the study. In addition, the provision of Quality of Service (QoS) for the application of specific healthcare services in e-health, the scheme of priority for e-health services and the support of QoS in wireless networks and techniques or methods for IEEE 802.11 to guarantee the provision of QoS has also been assessed.
In e-health, medical services in remote locations such as rural healthcare centers, ambulances, ships as well as
home healthcare services can be supported through the applications of e-health services such as medical
databases, electronic health records and the routing of text, audio, video and images. Given this, an adaptive
resource allocation for a wireless network with multiple service types and multiple priorities have been
proposed. For the provision of an acceptable QoS level to users of e-health services, prioritization is an
important criterion in a multi-traffic network. The requirement for QoS provisioning in wireless broadband
medical networks have paved the pathway for bandwidth requirements and the real-time or live transmission
of medical applications. From the study, good performance of the proposed scheme has been validated by the
results obtained. The proposed wireless network is capable of handling medical applications for both normal
and life-threatening conditions as characterized by the level of emergencies. In addition, the bandwidth
allocation and admission control algorithm for IEEE 802.16- based design specifically for wireless
telemedicine/e-health services have also been presented in the study. It has been concluded that under busy
traffic conditions, the proposed architecture can used as a feasible and reliable infrastructure network for
telemedicine
QUALITY-OF-SERVICE PROVISIONING FOR SMART CITY APPLICATIONS USING SOFTWARE-DEFINED NETWORKING
In the current world, most cities have WiFi Access Points (AP) in every nook and corner. Hence upraising these cities to the status of a smart city is a more easily achievable task than before. Internet-of-Things (IoT) connections primarily use WiFi standards to form the veins of a smart city. Unfortunately, this vast potential of WiFi technology in the genesis of smart cities is somehow compromised due to its failure in meeting unique Quality-of-Service (QoS) demands of smart city applications. Out of the following QoS factors; transmission link bandwidth, packet transmission delay, jitter, and packet loss rate, not all applications call for the all of the factors at the same time. Since smart city is a pool of drastically unrelated services, this variable demand can actually be advantageous to optimize the network performance. This thesis work is an attempt to achieve one of those QoS demands, namely packet delivery latency. Three algorithms are developed to alleviate traffic load imbalance at APs so as to reduce packet forwarding delay. Software-Defined Networking (SDN) is making its way in the network world to be of great use and practicality. The algorithms make use of SDN features to control the connections to APs in order to achieve the delay requirements of smart city services. Real hardware devices are used to imitate a real-life scenario of citywide coverage consisting of WiFi devices and APs that are currently available in the market with neither of those having any additional requirements such as support for specific roaming protocol, running a software agent or sending probe packets. Extensive hardware experimentation proves the efficacy of the proposed algorithms
- …