1,294 research outputs found
Topology-Transparent Scheduling in Mobile Ad Hoc Networks With Multiple Packet Reception Capability
Recent advances in the physical layer have enabled wireless devices to have multiple packet reception (MPR) capability, which is the capability of decoding more than one packet, simultaneously, when concurrent transmissions occur. In this paper, we focus on the interaction between the MPR physical layer and the medium access control (MAC) layer. Some random access MAC protocols have been proposed to improve the network performance by exploiting the powerful MPR capability. However, there are very few investigations on the schedule-based MAC protocols. We propose a novel m-MPR-l-code topology-transparent scheduling ((m, l)-TTS) algorithm for mobile ad hoc networks with MPR, where m indicates the maximum number of concurrent transmissions being decoded, and l is the number of codes assigned to each user. Our algorithm can take full advantage of the MPR capability to improve the network performance. The minimum guaranteed throughput and average throughput of our algorithm are studied analytically. The improvement of our (m, l)-TTS algorithm over the conventional topology-transparent scheduling algorithms with the collision-based reception model is linear with m. The simulation results show that our proposed algorithm performs better than slotted ALOHA as well.published_or_final_versio
Topology-Transparent Scheduling in Mobile Ad Hoc Networks Supporting Heterogeneous Quality of Service Guarantees
Transmission scheduling plays a critical role in mobile ad hoc networks. Many transmission scheduling algorithms have been proposed to maximize the spatial reuse and minimize the time-division multiple-access (TDMA) frame length. Most algorithms require information on the network topology and cannot adapt to the dynamic topology in mobile scenarios. To overcome this limitation, topology-transparent scheduling algorithms have been proposed. Most of them, based on Galois field theory, Latin square, and block design theory, assign time slots to users and guarantee that there is at least one collision-free slot in each frame for each user. To the best of our knowledge, none of these topology-transparent algorithms support multiple quality of service (QoS) requirements. In this paper, we exploit the variable-weight optical orthogonal codes (VW-OOC) to design a topology-transparent scheduling algorithm in wireless ad hoc networks with multiple QoS levels. We study the performance, in terms of minimum guaranteed throughput and average throughput, of our proposed algorithm analytically and by extensive simulations.published_or_final_versio
The Octopus switch
This chapter1 discusses the interconnection architecture of the Mobile Digital Companion. The approach to build a low-power handheld multimedia computer presented here is to have autonomous, reconfigurable modules such as network, video and audio devices, interconnected by a switch rather than by a bus, and to offload as much as work as possible from the CPU to programmable modules placed in the data streams. Thus, communication between components is not broadcast over a bus but delivered exactly where it is needed, work is carried out where the data passes through, bypassing the memory. The amount of buffering is minimised, and if it is required at all, it is placed right on the data path, where it is needed. A reconfigurable internal communication network switch called Octopus exploits locality of reference and eliminates wasteful data copies. The switch is implemented as a simplified ATM switch and provides Quality of Service guarantees and enough bandwidth for multimedia applications. We have built a testbed of the architecture, of which we will present performance and energy consumption characteristics
Long-Range Communications in Unlicensed Bands: the Rising Stars in the IoT and Smart City Scenarios
Connectivity is probably the most basic building block of the Internet of
Things (IoT) paradigm. Up to know, the two main approaches to provide data
access to the \emph{things} have been based either on multi-hop mesh networks
using short-range communication technologies in the unlicensed spectrum, or on
long-range, legacy cellular technologies, mainly 2G/GSM, operating in the
corresponding licensed frequency bands. Recently, these reference models have
been challenged by a new type of wireless connectivity, characterized by
low-rate, long-range transmission technologies in the unlicensed sub-GHz
frequency bands, used to realize access networks with star topology which are
referred to a \emph{Low-Power Wide Area Networks} (LPWANs). In this paper, we
introduce this new approach to provide connectivity in the IoT scenario,
discussing its advantages over the established paradigms in terms of
efficiency, effectiveness, and architectural design, in particular for the
typical Smart Cities applications
WIMAX Basics from PHY Layer to Scheduling and Multicasting Approaches
WiMAX (Worldwide Interoperability for Microwave Access) is an emerging broadband wireless technology for providing Last mile solutions for supporting higher bandwidth and multiple service classes with various quality of service requirement. The unique architecture of the WiMAX MAC and PHY layers that uses OFDMA to allocate multiple channels with different modulation schema and multiple time slots for each channel allows better adaptation of heterogeneous user’s requirements. The main architecture in WiMAX uses PMP (Point to Multipoint), Mesh mode or the new MMR (Mobile Multi hop Mode) deployments where scheduling and multicasting have different approaches. In PMP SS (Subscriber Station) connects directly to BS (Base Station) in a single hop route so channel conditions adaptations and supporting QoS for classes of services is the key points in scheduling, admission control or multicasting, while in Mesh networks SS connects to other SS Stations or to the BS in a multi hop routes, the MMR mode extends the PMP mode in which the SS connects to either a relay station (RS) or to Bs. Both MMR and Mesh uses centralized or distributed scheduling with multicasting schemas based on scheduling trees for routing. In this paper a broad study is conducted About WiMAX technology PMP and Mesh deployments from main physical layers features with differentiation of MAC layer features to scheduling and multicasting approaches in both modes of operations
Cross-layer design of multi-hop wireless networks
MULTI -hop wireless networks are usually defined as a collection of nodes
equipped with radio transmitters, which not only have the capability to
communicate each other in a multi-hop fashion, but also to route each others’ data
packets. The distributed nature of such networks makes them suitable for a variety of
applications where there are no assumed reliable central entities, or controllers, and
may significantly improve the scalability issues of conventional single-hop wireless
networks.
This Ph.D. dissertation mainly investigates two aspects of the research issues
related to the efficient multi-hop wireless networks design, namely: (a) network
protocols and (b) network management, both in cross-layer design paradigms to
ensure the notion of service quality, such as quality of service (QoS) in wireless mesh
networks (WMNs) for backhaul applications and quality of information (QoI) in
wireless sensor networks (WSNs) for sensing tasks. Throughout the presentation of
this Ph.D. dissertation, different network settings are used as illustrative examples,
however the proposed algorithms, methodologies, protocols, and models are not
restricted in the considered networks, but rather have wide applicability.
First, this dissertation proposes a cross-layer design framework integrating
a distributed proportional-fair scheduler and a QoS routing algorithm, while using
WMNs as an illustrative example. The proposed approach has significant performance
gain compared with other network protocols. Second, this dissertation proposes
a generic admission control methodology for any packet network, wired and
wireless, by modeling the network as a black box, and using a generic mathematical
0. Abstract 3
function and Taylor expansion to capture the admission impact. Third, this dissertation
further enhances the previous designs by proposing a negotiation process,
to bridge the applications’ service quality demands and the resource management,
while using WSNs as an illustrative example. This approach allows the negotiation
among different service classes and WSN resource allocations to reach the optimal
operational status. Finally, the guarantees of the service quality are extended to
the environment of multiple, disconnected, mobile subnetworks, where the question
of how to maintain communications using dynamically controlled, unmanned data
ferries is investigated
Predicting topology propagation messages in mobile ad hoc networks: The value of history
This research was funded by the Spanish Government under contracts TIN2016-77836-C2-1-R,TIN2016-77836-C2-2-R, and DPI2016-77415-R, and by the Generalitat de Catalunya as Consolidated ResearchGroups 2017-SGR-688 and 2017-SGR-990.The mobile ad hoc communication in highly dynamic scenarios, like urban evacuations or search-and-rescue processes, plays a key role in coordinating the activities performed by the participants. Particularly, counting on message routing enhances the communication capability among these actors. Given the high dynamism of these networks and their low bandwidth, having mechanisms to predict the network topology offers several potential advantages; e.g., to reduce the number of topology propagation messages delivered through the network, the consumption of resources in the nodes and the amount of redundant retransmissions. Most strategies reported in the literature to perform these predictions are limited to support high mobility, consume a large amount of resources or require training. In order to contribute towards addressing that challenge, this paper presents a history-based predictor (HBP), which is a prediction strategy based on the assumption that some topological changes in these networks have happened before in the past, therefore, the predictor can take advantage of these patterns following a simple and low-cost approach. The article extends a previous proposal of the authors and evaluates its impact in highly mobile scenarios through the implementation of a real predictor for the optimized link state routing (OLSR) protocol. The use of this predictor, named OLSR-HBP, shows a reduction of 40–55% of topology propagation messages compared to the regular OLSR protocol. Moreover, the use of this predictor has a low cost in terms of CPU and memory consumption, and it can also be used with other routing protocols.Peer ReviewedPostprint (published version
- …