'THz Torch' wireless communications links

The low-cost 'THz Torch’ technology, which exploits the thermal infrared spectrum (ca. 10 to 100 THz), was recently introduced to provide secure low data rate communications links across short ranges. In this thesis, the channel model for 'THz Torch’ wireless communications links is redeveloped from a thermodynamics perspective. Novel optimization-based channel estimators are also proposed to calibrate parameters in the channel model. Based on these theoretical advances, a cognitive 'THz Torch’ receiver, which combines conventional digital communications with state-of-the-art deep learning techniques, is presented to achieve cognitive synchronization and demodulation. The newly reported 'THz Torch’ wireless link is capable of bypassing the thermal time constant constraints normally associated with both the thermal emitter and sensor, allowing truly asynchronous data transfer with direct electronic modulation. Experimental results obtained in both laboratory environments and field trials demonstrate step-change improvements in channel range, bit rate, bit error rate and demodulation speed. This work represents a paradigm shift in modulation-demodulation with a thermal-based physical layer and offers a practical solution for implementing future ubiquitous secure 'THz Torch’ wireless communications links. The cognitive receiver concept also has wide-ranging implications for future communications and sensor technologies, making them more resilient when operating in harsh environments.Open Acces

Physical layer solutions for ultra-broadband wireless communications in the terahertz band

In recent years, the wireless data traffic grew exponentially, which was further accompanied by an increasing demand for higher data rates. Towards this aim, Terahertz band (0.1-10 THz) communication is envisioned as one of the key wireless technologies of the next decade. The THz band will help to overcome the spectrum scarcity problems and capacity limitations of current wireless networks, by providing an unprecedentedly large bandwidth. In addition, THz band communication will enable a plethora of long-awaited applications ranging from instantaneous massive data transfer among nearby devices in ultra-high-speed wireless personal and local area networks, to ultra-high-definition content streaming over mobile devices in 5G and beyond small cells. The objective of the thesis is to establish the physical layer foundations of the ultra- broadband communication in the THz band. First, a unified multi-path propagation channel is modeled in the THz band, based on ray-tracing techniques. The wideband characterization are analyzed, which include the distance-varying spectral windows, the delay spread, the wideband capacity and the temporal broadening effects. Second, a multi-wideband waveform design for the THz band is proposed to improve the distance and support ultra- high-speed transmissions. Third, two algorithms for timing acquisition in the pulse-based wireless systems are developed, namely the low-sampling-rate (LSR) algorithm, and the maximum likelihood (ML)-based approach. Fourth, the distance-aware bandwidth resource allocation schemes for the single-user and multi-user THz band networks are developed. Fifth, a three-dimensional (3-D) end-to-end model is developed and characterized, which includes the responses of the graphene-based reflectarray antenna and the 3-D multi-path propagation. The provided physical layer analysis in this thesis lays out the foundation for reliable and efficient ultra-high-speed wireless communications in the THz band.Ph.D

Energy Efficient Event Localization and Classification for Nano IoT

Advancements in nanotechnology promises new capabilities for Internet of Things (IoT) to monitor extremely fine-grained events by deploying sensors as small as a few hundred nanometers. Researchers predict that such tiny sensors can transmit wireless data using graphene-based nano-antenna radiating in the terahertz band (0.1-10 THz). Powering such wireless communications with nanoscale energy supply, however, is a major challenge to overcome. In this paper, we propose an energy efficient event monitoring framework for nano IoT that enables nanosensors to update a remote base station about the location and type of the detected event using only a single short pulse. Nanosensors encode different events using different center frequencies with non overlapping half power bandwidth over the entire terahertz band. Using uniform linear array (ULA) antenna, the base station localizes the events by estimating the direction of arrival of the pulse and classifies them from the center frequency estimated by spectral centroid of the received signal. Simulation results confirm that, from a distance of 1 meter, a 6th derivative Gaussian pulse consuming only 1 atto Joule can achieve localization and classification accuracies of 1.58 degree and 98.8%, respectively.Comment: 6 pages, 18 Figures, accepted for publication in IEEE GLOBECOM Conference 201

Fiber-based Terahertz Time-Domain Spectroscopy Systems Operated in the Telecom Band

The aim of the doctoral thesis is the study of Terahertz time domain spectrometers relying on telecommunication fiber technology. Optical fiber offers low losses, high stability and compactness, features that ease the deployment of this kind of sensing instruments in industrial scenarios. The development of terahertz signal sources working at telecom wavelengths has enabled the employment of mature, telecom-related photonic components that allowed a transition within THz research from being mainly object of scientific interest to an application-oriented technology. In this thesis, fiber terahertz systems utilizing ultrafast photoconductors with integrated antenna structures have been investigated at different levels, including the control of the photoconductor structure, as well as at instrument and system levels. The carrier transport in InGaAs-InAlAs multilayer hetero-structures, present in the employed photoconductive antennas, has been investigated under the additional injection of a continuous optical wave. By varying the amplitude level of the respective optical signal injected into either the emitter or the receiver, it has been shown that the amplitude of the detected photocurrent could be controlled without affecting its bandwidth. Unlike increasing the optical power of the pulsed signal, raising the continuous optical power results in a reduction of the measured photocurrent. This lowering of the conductivity is related to changes in the instantaneous carrier momentum relaxation time in the photoactive material, rather than to variations of the free carrier density level. This behavior affects systems including continuous-wave optical components, as, for instance, optical amplifiers. The effect has been further exploited to modulate the operation conditions of photoconductive antennas, enabling an all-optical control of the THz amplitude. This represents a method to implement a signal modulation, necessary, for instance, for lock-in signal detection. Different industrial applications and THz imaging systems require fast data acquisition. Slow, stepwise working mechanical optical delay lines are about to be replaced by faster schemes. A fast THz-time-domain spectroscopy system using a coil-based rapid mechanic delay line has been set up and analyzed. A convenience of usage of optical fibers is the simplicity of signal multiplication and distribution. It can be exploited to allow centralized operation of a set of parallel terahertz sensing units. A centralized architecture with optical source sharing simplifies the implementation as well as the cost of nondestructive inspection platforms, where several sensing units would have to work in the same facility, for example at quality control in factories or security checkpoints. The cost of such a distribution system is evaluated, its feasibility experimentally demonstrated, and key features relevant to the system performance are discussed. The present document is formally structured in a brief introduction, Chapter 2, which review common terahertz technology as a whole, with the focus on optoelectronic schemes and respective technology in the telecom band. Chapter 3 includes work carried out dealing with the carrier dynamics under continuous optical wave irradiation of the photoconductive antenna modules and the application of the effect as modulation method. Chapter 4 deals with the implementation of the fast delay in the system and Chapter 5 describes and analyses architecture for parallel, remotely controlled sensing. Finally, Chapter 6 provides conclusion and future work perspectives.El objetivo de la presente Tesis Doctoral es el estudio de espectroscopios temporales de Terahercios basados en tecnología de fibra óptica para telecomunicaciones. La fibra óptica ofrece bajas pérdidas de propagación, alta estabilidad y la capacidad de implementar sistemas robustos y compactos, características que facilitan el despliegue de este tipo de instrumentos de sensado en escenarios industriales. El desarrollo de fuentes de THz que operan en la banda infrarroja empleada en telecomunicaciones permite el uso de componentes maduros de la industria de las comunicaciones ópticas, lo que a su vez se ha traducido en una transición desde el uso de la banda de THz básicamente para intereses científicos al desarrollo de sistemas para aplicaciones industriales. En la presente tesis se investigan sistemas de THz basados en antenas fotoconductivas y fibra óptica a distintos niveles: control de la estructura fotoconductiva, instrumento y sistema. El transporte de portadores en heteroestructuras multicapa InGaAs-InAlAs, empleadas actualmente en antenas fotoconductivas, se ha investigado bajo la inyección de una onda óptica continua. Se ha observado que variando el nivel de amplitud de esta onda continua tanto en el emisor como en el receptor es posible controlar la fotocorriente detectada sin afectar a su ancho de banda. A diferencia de un incremento en la potencia óptica de la señal pulsada, elevar el nivel de continua resulta en una reducción de la fotocorriente medida. Esta reducción de la conductividad se relaciona con cambios en el tiempo de relajación del momento de los portadores en el material fotoactivo en lugar de variaciones de la densidad de portadores libres. Este comportamiento puede tener un efecto en sistemas que introduzcan componentes ópticos continuos como por ejemplo sistemas de sensado que empleen amplificadores ópticos. Este efecto puede ser usado para modular las condiciones de operación de las antenas fotoconductivas permitiendo el control todo-óptico del sistema. Este método permite modular la señal, lo que resulta necesario por ejemplo para realizar detección lock-in. Tanto diferentes aplicaciones industriales como los sistemas de imagen en THz requieren sistemas rápidos de captura. Para ello es necesario sustituir las líneas de retardo ópticas tradicionales basadas en motores paso-a-paso por otros sistemas de mayor velocidad. Se ha implementado y caracterizado un sistema THz-TDS usando una línea de retardo rápida basada en bobinas de voz. Una característica fundamental de la fibra óptica es su extraordinaria simplicidad para realizar la distribución de señales ópticas. Esta característica puede ser explotada para permitir la operación centralizada de un conjunto paralelo de sensores de THz. Una arquitectura centralizada en la que la fuente óptica se comparte entre muchos sensores simplifica la implementación y reduce el coste de sistemas de inspección no destructiva que requieran de múltiples sensores en paralelo, como, por ejemplo, en control de calidad industrial o en controles de seguridad. Se ha evaluado el coste de estos sistemas distribuidos, se ha validado experimentalmente su viabilidad y se han identificado y estudiado sus prestaciones. El documento de la tesis doctoral se estructura formalmente en una breve introducción, el capítulo 2, en el que se revisa la tecnología de THz en su conjunto, los esquemas optoelectrónicos y el uso de tecnologías ópticas basadas en la banda de las telecomunicaciones. El capítulo 3 incluye el estudio realizado sobre la dinámica de los portadores bajo la irradiación dela antena fotoconductiva con una onda óptica continua y su uso como técnica de modulación. El capítulo 4 trata con la implementación de un sistema THz-TDS rápido mientras que el capítulo 5 describe y analiza una arquitectura de sensado paralela para reducir costes. Finalmente el capítulo 6 recoge las conclusiones y futuras líneas de actuación.L'objectiu de la present Tesi Doctoral és l'estudi d'espectroscopis temporals de terahertzs basats en tecnologia de fibra òptica per a telecomunicacions. La fibra òptica ofereix baixes pèrdues de propagació, alta estabilitat i la capacitat d'implementar sistemes robustos i compactes, característiques que faciliten el desplegament d'aquest tipus d'instruments de sensat en escenaris industrials. El desenvolupament de fonts de THz que operen a la banda infraroja emprada en telecomunicacions permet l'ús de components madurs de la indústria de les comunicacions òptiques, el que al seu torn s'ha traduït en una transició des de l'ús de la banda de THz bàsicament per interessos científics al desenvolupament de sistemes per a aplicacions industrials. En la present tesi s'investiguen sistemes de THz basats en antenes fotoconductivas i fibra òptica a diferents nivells: control de l'estructura fotoconductiva, instrument i sistema. El transport de portadors en heteroestructures multicapa InGaAs-InAlAs, emprades actualment en antenes fotoconductivas, s'ha investigat sota la injecció d'una ona òptica contínua. S'ha observat que variant el nivell d'amplitud d'aquesta ona contínua tant en l'emissor com en el receptor és possible controlar la fotocorriente detectada sense afectar el seu ample de banda. A diferència d'un increment en la potència òptica del senyal polsada, elevar el nivell de contínua resulta en una reducció de la fotocorrent mesurada. Aquesta reducció de la conductivitat es relaciona amb canvis en el temps de relaxació del moment dels portadors en el material fotoactiu en lloc de variacions de la densitat de portadors lliures. Aquest comportament pot tenir un efecte en sistemes que introdueixin components òptics continus com ara sistemes de sensat que utilitzen amplificadors òptics. Aquest efecte pot ser usat per modular les condicions d'operació de les antenes fotoconductivas permetent el control tot-òptic del sistema. Aquest mètode permet modular el senyal, el que resulta necessari per exemple per realitzar detecció lock-in. Tant diferents aplicacions industrials com els sistemes d'imatge en THz requereixen sistemes ràpids de captura. Per a això és necessari substituir les línies de retard òptiques tradicionals basades en motors pas-a-pas per altres sistemes de major velocitat. S'ha implementat i caracteritzat un sistema THz-TDS usant una línia de retard ràpida basada en bobines de veu. Una característica fonamental de la fibra òptica és la seua extraordinària simplicitat per realitzar la distribució de senyals òptiques. Aquesta característica pot ser explotada per a permetre l'operació centralitzada d'un conjunt paral·lel de sensors de THz. Una arquitectura centralitzada en la qual la font òptica es comparteix entre molts sensors simplifica la implementació i redueix el cost de sistemes d'inspecció no destructiva que requereixin de múltiples sensors en paral·lel, com, per exemple, en control de qualitat industrial o en controls de seguretat . S'ha avaluat el cost d'aquests sistemes distribuïts, s'ha validat experimentalment la seua viabilitat i s'han identificat i estudiat les seues prestacions. El document de la tesi doctoral s'estructura formalment en una breu introducció, capítol 2, en el qual es revisa la tecnologia de THz en el seu conjunt, els esquemes optoelectrònics i l'ús de tecnologies òptiques basades en la banda de les telecomunicacions. El capítol 4 inclou l'estudi realitzat sobre la dinàmica dels portadors sota la irradiació de la antena fotoconductiva amb una ona òptica contínua i el seu ús com a tècnica de modulació. El capítol 5 tracta la implementació d'un sistema THz-TDS ràpid mentre que el capítol 6 descriu i analitza una arquitectura de sensat paral·lela per reduir costos. Finalment, el capítol 7 recull les conclusions i futures línies d'actuació.Bockelt, AS. (2017). Fiber-based Terahertz Time-Domain Spectroscopy Systems Operated in the Telecom Band [Tesis doctoral no publicada]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/86148TESI

Terahertz wireless communication

The goal of this thesis is to explore Terahertz (THz) wireless communication technology. More specifically the objective is to develop and characterize several THz communication systems and study the effect of atmosphere propagation through fog droplets and dust particles on THz communications. For demonstration, a THz continuous wave (CW) photomixing system is designed. Terahertz signals are phase encoded with both analog ramp signals and pseudorandom binary data, transmitted over a short distance, and detected. The limitation of transmission bandwidth, low single to noise ratio, vibration effects are also analyzed. In order to study and compare propagation features of THz links with infrared (IR) links under different weather conditions, a THz and IR communications lab setup with a maximum data rate of 2.5 Gb/s at 625 GHz carrier frequency and 1.5 gm wavelength, have been developed respectively. A usual non return-to-zero (NRZ) format is applied to modulate the IR channel but a duobinary coding technique is used for driving the multiplier chain-based 625 GHz source, which enables signaling at high data rate and higher output power. The bit-error rate (BER), signal-to-noise ratio (SNR) and power on the receiver side have been measured, which describe the signal performance. Since weather conditions such as fog and dust exhibit a spectral dependence in the atmospheric attenuation, the corresponding impact on THz in comparison with IR communications is not equivalent. Simulation results of attenuation by fog and dust in the millimeter and sub-millimeter waveband (from 0.1 to 1 THz) and infrared waveband (1.5 µm) are presented and compared. Experimentally, after THz and IR beams propagated through the same weather conditions (fog), performance of both channels are analyzed and compared. The attenuation levels for the IR beam are typically several orders of magnitude higher than those for the THz beam. Mie scattering theory was used to study the attenuation of THz and IR radiation due to the dust particle. Different amounts of dust are loaded in the chamber to generate a variety of concentration for beam propagation. As the dust loading becomes heavier, the measured attenuation becomes more severe. Under identical dust concentrations, IR wavelengths are strongly attenuated while THz shows almost no impact

Performance Comparison of TR and FSRUWB System Using Particle Filter: Effects of Frequency, Data Rate, Multi-Path and Multi-Channel Communication

In this study, we introduced a novel scheme based on Transmitted References (TR) and Frequency Shifted Reference (FSR) for ultra-wideband (UWB) system. By taking into account tracking loop-based particle filtering together with a data collecting approach for single and multi-path channel situations, the suggested method is an enhanced model. Each particle's location is determined using this filtering technique, which is then utilised to calculate the timing inaccuracy and regulate the UWB system's timing pulse. Also, it can tackle the multimodal distribution of errors then effectively approximate the optimal solution. The data distribution is discretised via a number of particles that are weighted samples evolving concerning time duration. The simulation results show that, in terms of error rate, number of particles, and delay response, the recommended model of FSR-UWB with particle filter performs better than the TR-UWB with and without considering particle filter