Multi-Antenna Assisted Virtual Full-Duplex Relaying with Reliability-Aware Iterative Decoding

In this paper, a multi-antenna assisted virtual full-duplex (FD) relaying with reliability-aware iterative decoding at destination node is proposed to improve system spectral efficiency and reliability. This scheme enables two half-duplex relay nodes, mimicked as FD relaying, to alternatively serve as transmitter and receiver to relay their decoded data signals regardless the decoding errors, meanwhile, cancel the inter-relay interference with QR-decomposition. Then, by deploying the reliability-aware iterative detection/decoding process, destination node can efficiently mitigate inter-frame interference and error propagation effect at the same time. Simulation results show that, without extra cost of time delay and signalling overhead, our proposed scheme outperforms the conventional selective decode-and-forward (S-DF) relaying schemes, such as cyclic redundancy check based S-DF relaying and threshold based S-DF relaying, by up to 8 dB in terms of bit-error-rate.Comment: 6 pages, 4 figures, conference paper has been submitte

Soft information based protocols in network coded relay networks

Future wireless networks aim at providing higher quality of service (QoS) to mobile users. The emergence of relay technologies has shed light on new methodologies through which the system capacity can be dramatically increased with low deployment cost. In this thesis, novel relay technologies have been proposed in two practical scenarios: wireless sensor networks (WSN) and cellular networks. In practical WSN designs, energy conservation is the single most important requirement. This thesis draws attention to a multiple access relay channels model in the WSN. The network coded symbol for the received signals from correlated sources has been derived; the network coded symbol vector is then converted into a sparse vector, after which a compressive sensing (CS) technique is applied over the sparse signals. A theoretical proof analysis is derived regarding the reliability of the network coded symbol formed in the proposed protocol. The proposed protocol results in a better bit error rate (BER) performance in comparison to the direct implementation of CS on the EF protocol. Simulation results validate our analyses. Another hot topic is the application of relay technologies to the cellular networks. In this thesis, a practical two-way transmission scheme is proposed based on the EF protocol and the network coding technique. A trellis coded quantization/modulation (TCQ/M) scheme is used in the network coding process. The soft network coded symbols are quantized into only one bit thus requiring the same transmission bandwidth as the simplest decode-and-forward protocol. The probability density function of the network coded symbol is derived to help to form the quantization codebook for the TCQ. Simulations show that the proposed soft forwarding protocol can achieve full diversity with only a transmission rate of 1, and its BER performance is equivalent to that of an unquantized EF protocol

Soft information based protocols in network coded relay networks

Future wireless networks aim at providing higher quality of service (QoS) to mobile users. The emergence of relay technologies has shed light on new methodologies through which the system capacity can be dramatically increased with low deployment cost. In this thesis, novel relay technologies have been proposed in two practical scenarios: wireless sensor networks (WSN) and cellular networks. In practical WSN designs, energy conservation is the single most important requirement. This thesis draws attention to a multiple access relay channels model in the WSN. The network coded symbol for the received signals from correlated sources has been derived; the network coded symbol vector is then converted into a sparse vector, after which a compressive sensing (CS) technique is applied over the sparse signals. A theoretical proof analysis is derived regarding the reliability of the network coded symbol formed in the proposed protocol. The proposed protocol results in a better bit error rate (BER) performance in comparison to the direct implementation of CS on the EF protocol. Simulation results validate our analyses. Another hot topic is the application of relay technologies to the cellular networks. In this thesis, a practical two-way transmission scheme is proposed based on the EF protocol and the network coding technique. A trellis coded quantization/modulation (TCQ/M) scheme is used in the network coding process. The soft network coded symbols are quantized into only one bit thus requiring the same transmission bandwidth as the simplest decode-and-forward protocol. The probability density function of the network coded symbol is derived to help to form the quantization codebook for the TCQ. Simulations show that the proposed soft forwarding protocol can achieve full diversity with only a transmission rate of 1, and its BER performance is equivalent to that of an unquantized EF protocol

Efficient Transmission Techniques in Cooperative Networks: Forwarding Strategies and Distributed Coding Schemes

This dissertation focuses on transmission and estimation schemes in wireless relay network, which involves a set of source nodes, a set of destination nodes, and a set of nodes helps communication between source nodes and destination nodes, called relay nodes. It is noted that the overall performance of the wireless relay systems would be impacted by the relay methods adopted by relay nodes. In this dissertation, efficient forwarding strategies and channel coding involved relaying schemes in various relay network topology are studied.First we study a simple structure of relay systems, with one source, one destination and one relay node. By exploiting “analog codes” -- a special class of error correction codes that can directly encode and protect real-valued data, a soft forwarding strategy –“analog-encode-forward (AEF)”scheme is proposed. The relay node first soft-decodes the packet from the source, then re-encodes this soft decoder output (Log Likelihood Ratio) using an appropriate analog code, and forwards it to the destination. At the receiver, both a maximum-likelihood (ML) decoder and a maximum a posterior (MAP) decoder are specially designed for the AEF scheme.The work is then extended to parallel relay networks, which is consisted of one source, one destination and multiple relay nodes. The first question confronted with us is which kind of soft information to be relayed at the relay nodes. We analyze a set of prevailing soft information for relaying considered by researchers in this field. A truncated LLR is proved to be the best choice, we thus derive another soft forwarding strategy – “Z” forwarding strategy. The main parameter effecting the overall performance in this scheme is the threshold selected to cut the LLR information. We analyze the threshold selection at the relay nodes, and derive the exact ML estimation at the destination node. To circumvent the catastrophic error propagation in digital distributed coding scheme, a distributed soft coding scheme is proposed for the parallel relay networks. The key idea is the exploitation of a rate-1 soft convolutional encoder at each of the parallel relays, to collaboratively form a simple but powerful distributed analog coding scheme. Because of the linearity of the truncated LLR information, a nearly optimal ML decoder is derived for the distributed coding scheme. In the last part, a cooperative transmission scheme for a multi-source single-destination system through superposition modulation is investigated. The source nodes take turns to transmit, and each time, a source “overlays” its new data together with (some or all of) what it overhears from its partner(s), in a way similar to French-braiding the hair. We introduce two subclasses of braid coding, the nonregenerative and the regenerative cases, and, using the pairwise error probability (PEP) as a figure of merit, derive the optimal weight parameters for each one. By exploiting the structure relevance of braid codes with trellis codes, we propose a Viterbi maximum-likelihood (ML) decoding method of linear-complexity for the regenerative case. We also present a soft-iterative joint channel-network decoding. The overall decoding process is divided into the forward message passing and the backward message passing, which makes effective use of the available reliability information from all the received signals. We show that the proposed “braid coding” cooperative scheme benefits not only from the cooperative diversity but also from the bit error rate (BER) performance gain

Symbol-Level Selective Full-Duplex Relaying with Power and Location Optimization

In this paper, a symbol-level selective transmission for full-duplex (FD) relaying networks is proposed to mitigate error propagation effects and improve system spectral efficiency. The idea is to allow the FD relay node to predict the correctly decoded symbols of each frame, based on the generalized square deviation method, and discard the erroneously decoded symbols, resulting in fewer errors being forwarded to the destination node. Using the capability for simultaneous transmission and reception at the FD relay node, our proposed strategy can improve the transmission efficiency without extra cost of signalling overhead. In addition, targeting on the derived expression for outage probability, we compare it with half-duplex (HD) relaying case, and provide the transmission power and relay location optimization strategy to further enhance system performance. The results show that our proposed scheme outperforms the classic relaying protocols, such as cyclic redundancy check based selective decode-and-forward (S-DF) relaying and threshold based S-DF relaying in terms of outage probability and bit-error-rate. Moreover, the performances with optimal power allocation is better than that with equal power allocation, especially when the FD relay node encounters strong self-interference and/or it is close to the destination node.Comment: 34 pages (single-column), 14 figures, 2 tables, accepted pape

Dispensing with channel estimation: differentially modulated cooperative wireless communications

As a benefit of bypassing the potentially excessive complexity and yet inaccurate channel estimation, differentially encoded modulation in conjunction with low-complexity noncoherent detection constitutes a viable candidate for user-cooperative systems, where estimating all the links by the relays is unrealistic. In order to stimulate further research on differentially modulated cooperative systems, a number of fundamental challenges encountered in their practical implementations are addressed, including the time-variant-channel-induced performance erosion, flexible cooperative protocol designs, resource allocation as well as its high-spectral-efficiency transceiver design. Our investigations demonstrate the quantitative benefits of cooperative wireless networks both from a pure capacity perspective as well as from a practical system design perspective

Security and Prioritization in Multiple Access Relay Networks

In this work, we considered a multiple access relay network and investigated the following three problems: 1- Tradeoff between reliability and security under falsified data injection attacks; 2-Prioritized analog relaying; 3- mitigation of Forwarding Misbehaviors in Multiple access relay network. In the first problem, we consider a multiple access relay network where multiple sources send independent data to a single destination through multiple relays which may inject a falsified data into the network. To detect the malicious relays and discard (erase) data from them, tracing bits are embedded in the information data at each source node. Parity bits may be also added to correct the errors caused by fading and noise. When the total amount of redundancy, tracing bits plus parity bits, is fixed, an increase in parity bits to increase the reliability requires a decrease in tracing bits which leads to a less accurate detection of malicious behavior of relays, and vice versa. We investigate the tradeoff between the tracing bits and the parity bits in minimizing the probability of decoding error and maximizing the throughput in multi-source, multi-relay networks under falsified data injection attacks. The energy and throughput gains provided by the optimal allocation of redundancy and the tradeoff between reliability and security are analyzed. In the second problem, we consider a multiple access relay network where multiple sources send independent data simultaneously to a common destination through multiple relay nodes. We present three prioritized analog cooperative relaying schemes that provide different class of service (CoS) to different sources while being relayed at the same time in the same frequency band. The three schemes take the channel variations into account in determining the relay encoding (combining) rule, but differ in terms of whether or how relays cooperate. Simulation results on the symbol error probability and outage probability are provided to show the effectiveness of the proposed schemes. In the third problem, we propose a physical layer approach to detect the relay node that injects false data or adds channel errors into the network encoder in multiple access relay networks. The misbehaving relay is detected by using the maximum a posteriori (MAP) detection rule which is optimal in the sense of minimizing the probability of incorrect decision (false alarm and miss detection). The proposed scheme does not require sending extra bits at the source, such as hash function or message authentication check bits, and hence there is no transmission overhead. The side information regarding the presence of forwarding misbehavior is exploited at the decoder to enhance the reliability of decoding. We derive the probability of false alarm and miss detection and the probability of bit error, taking into account the lossy nature of wireless links