A DLL Based Test Solution for 3D ICs

Integrated circuits (ICs) are rapidly changing and vertical integration and packaging strategies have already become an important research topic. 2.5D and 3D IC integrations have obvious advantages over the conventional two dimensional IC implementations in performance, capacity, and power consumption. A passive Si interposer utilizing Through-Silicon via (TSV) technology is used for 2.5D IC integration. TSV is also the enabling technology for 3D IC integration. TSV manufacturing defects can affect the performance of stacked devices and reduce the yield. Manufacturing test methodologies for TSVs have to be developed to ensure fault-free devices. This thesis presents two test methods for TSVs in 2.5D and 3D ICs utilizing Delay-Locked Loop (DLL) modules. In the test method developed for TSVs in 2.5D ICs, a DLL is used to determine the propagation delay for fault detection. TSV faults in 3D ICs are detected through observation of the control voltage of a DLL. The proposed test methods present a robust performance against Process, supply Voltage and Temperature (PVT) variations due to the inherent feedback of DLLs. 3D full-wave simulations are performed to extract circuit level models for TSVs and fragments of an interposer wires using HFSS simulation tools. The extracted TSV models are then used to perform circuit level simulations using ADS tools from Agilent. Simulation results indicate that the proposed test solution for TSVs can detect manufacturing defects affecting the TSV propagation delay

Technologies for 3D Heterogeneous Integration

3D-Integration is a promising technology towards higher interconnect densities and shorter wiring lengths between multiple chip stacks, thus achieving a very high performance level combined with low power consumption. This technology also offers the possibility to build up systems with high complexity just by combining devices of different technologies. For ultra thin silicon is the base of this integration technology, the fundamental processing steps will be described, as well as appropriate handling concepts. Three main concepts for 3D integration have been developed at IZM. The approach with the greatest flexibility called Inter Chip Via - Solid Liquid Interdiffusion (ICV-SLID) is introduced. This is a chip-to-wafer stacking technology which combines the advantages of the Inter Chip Via (ICV) process and the solid-liquid-interdiffusion technique (SLID) of copper and tin. The fully modular ICV-SLID concept allows the formation of multiple device stacks. A test chip was designed and the total process sequence of the ICV-SLID technology for the realization of a three-layer chip-to-wafer stack was demonstrated. The proposed wafer-level 3D integration concept has the potential for low cost fabrication of multi-layer high-performance 3D-SoCs and is well suited as a replacement for embedded technologies based on monolithic integration. To address yield issues a wafer-level chip-scale handling is presented as well, to select known-good dies and work on them with wafer-level process sequences before joining them to integrated stacks.Comment: Submitted on behalf of EDA Publishing Association (http://irevues.inist.fr/handle/2042/16838

On Mitigation of Side-Channel Attacks in 3D ICs: Decorrelating Thermal Patterns from Power and Activity

Various side-channel attacks (SCAs) on ICs have been successfully demonstrated and also mitigated to some degree. In the context of 3D ICs, however, prior art has mainly focused on efficient implementations of classical SCA countermeasures. That is, SCAs tailored for up-and-coming 3D ICs have been overlooked so far. In this paper, we conduct such a novel study and focus on one of the most accessible and critical side channels: thermal leakage of activity and power patterns. We address the thermal leakage in 3D ICs early on during floorplanning, along with tailored extensions for power and thermal management. Our key idea is to carefully exploit the specifics of material and structural properties in 3D ICs, thereby decorrelating the thermal behaviour from underlying power and activity patterns. Most importantly, we discuss powerful SCAs and demonstrate how our open-source tool helps to mitigate them.Comment: Published in Proc. Design Automation Conference, 201

Characterization Of Thermal Stresses And Plasticity In Through-Silicon Via Structures For Three-Dimensional Integration

Through-silicon via (TSV) is a critical element connecting stacked dies in three-dimensional (3D) integration. The mismatch of thermal expansion coefficients between the Cu via and Si can generate significant stresses in the TSV structure to cause reliability problems. In this study, the thermal stress in the TSV structure was measured by the wafer curvature method and its unique stress characteristics were compared to that of a Cu thin film structure. The thermo-mechanical characteristics of the Cu TSV structure were correlated to microstructure evolution during thermal cycling and the local plasticity in Cu in a triaxial stress state. These findings were confirmed by microstructure analysis of the Cu vias and finite element analysis (FEA) of the stress characteristics. In addition, the local plasticity and deformation in and around individual TSVs were measured by synchrotron x-ray microdiffraction to supplement the wafer curvature measurements. The importance and implication of the local plasticity and residual stress on TSV reliabilities are discussed for TSV extrusion and device keep-out zone (KOZ).Microelectronics Research Cente

Enabling Technologies for 3D ICs: TSV Modeling and Analysis

Through silicon via (TSV) based three-dimensional (3D) integrated circuit (IC) aims to stack and interconnect dies or wafers vertically. This emerging technology offers a promising near-term solution for further miniaturization and the performance improvement of electronic systems and follows a more than Moore strategy. Along with the need for low-cost and high-yield process technology, the successful application of TSV technology requires further optimization of the TSV electrical modeling and design. In the millimeter wave (mmW) frequency range, the root mean square (rms) height of the TSV sidewall roughness is comparable to the skin depth and hence becomes a critical factor for TSV modeling and analysis. The impact of TSV sidewall roughness on electrical performance, such as the loss and impedance alteration in the mmW frequency range, is examined and analyzed following the second order small perturbation method. Then, an accurate and efficient electrical model for TSVs has been proposed considering the TSV sidewall roughness effect, the skin effect, and the metal oxide semiconductor (MOS) effect. However, the emerging application of 3D integration involves an advanced bio-inspired computing system which is currently experiencing an explosion of interest. In neuromorphic computing, the high density membrane capacitor plays a key role in the synaptic signaling process, especially in a spike firing analog implementation of neurons. We proposed a novel 3D neuromorphic design architecture in which the redundant and dummy TSVs are reconfigured as membrane capacitors. This modification has been achieved by taking advantage of the metal insulator semiconductor (MIS) structure along the sidewall, strategically engineering the fixed oxide charges in depletion region surrounding the TSVs, and the addition of oxide layer around the bump without changing any process technology. Without increasing the circuit area, these reconfiguration of TSVs can result in substantial power consumption reduction and a significant boost to chip performance and efficiency. Also, depending on the availability of the TSVs, we proposed a novel CAD framework for TSV assignments based on the force-directed optimization and linear perturbation

Cost-Effective TSV Grouping for Yield Improvement of 3D-ICs

Three-dimensional Integrated Circuits (3D-ICs) vertically stack multiple silicon dies to reduce overall wire length, power consumption, and allow integration of heterogeneous technologies. Through-silicon-vias (TSVs) which act as vertical links between layers pose challenges for 3D integration design. TSV defects can happen in fabrication process and bonding stage, which can reduce the yield and increase the cost. Recent work proposed the employment of redundant TSVs to improve the yield of 3D-ICs. This paper presents a redundant TSVs grouping technique, which partition regular and redundant TSVs into groups. For each group, a set of multiplexers are used to select good signal paths away from defective TSVs. We investigate the impact of grouping ratio (regular-to-redundant TSVs in one group) on trade-off between yield and hardware overhead. We also show probabilistic models for yield analysis under the influence of independent and clustering defect distributions. Simulation results show that for a given number of TSVs and TSV failure rate, careful selection of grouping ratios lead to achieving 100% yield at minimal hardware cost (number of multiplexers and redundant TSVs) in comparison to a design that does not exploit TSV grouping ratios

Optimizing the integration and energy efficiency of through silicon via-based 3D interconnects

The aggressive scaling of CMOS process technology has been driving the rapid growth of the semiconductor industry for more than three decades. In recent years, the performance gains enabled by CMOS scaling have been increasingly challenged by highlyparasitic on-chip interconnects as wire parasitics do not scale at the same pace. Emerging 3D integration technologies based on vertical through-silicon vias (TSVs) promise a solution to the interconnect performance bottleneck, along with reduced fabrication cost and heterogeneous integration. As TSVs are a relatively recent interconnect technology, innovative test structures are required to evaluate and optimise the process, as well as extract parameters for the generation of design rules and models. From the circuit designer’s perspective, critical TSV characteristics are its parasitic capacitance, and thermomechanical stress distribution. This work proposes new test structures for extracting these characteristics. The structures were fabricated on a 65nm 3D process and used for the evaluation of that technology. Furthermore, as TSVs are implemented in large, densely interconnected 3D-system-on-chips (SoCs), the TSV parasitic capacitance may become an important source of energy dissipation. Typical low-power techniques based on voltage scaling can be used, though this represents a technical challenge in modern technology nodes. In this work, a novel TSV interconnection scheme is proposed based on reversible computing, which shows frequencydependent energy dissipation. The scheme is analysed using theoretical modelling, while a demonstrator IC was designed based on the developed theory and fabricated on a 130nm 3D process.EThOS - Electronic Theses Online ServiceEngineering and Physical Science Research Council (EPSRC)GBUnited Kingdo

Thermomechanical Characterization And Modeling For TSV Structures

Continual scaling of devices and on-chip wiring has brought significant challenges for materials and processes beyond the 32-nm technology node in microelectronics. Recently, three-dimensional (3-D) integration with through-silicon vias (TSVs) has emerged as an effective solution to meet the future technology requirements. Among others, thermo-mechanical reliability is a key concern for the development of TSV structures used in die stacking as 3-D interconnects. This paper presents experimental measurements of the thermal stresses in TSV structures and analyses of interfacial reliability. The micro-Raman measurements were made to characterize the local distribution of the near-surface stresses in Si around TSVs. On the other hand, the precision wafer curvature technique was employed to measure the average stress and deformation in the TSV structures subject to thermal cycling. To understand the elastic and plastic behavior of TSVs, the microstructural evolution of the Cu vias was analyzed using focused ion beam (FIB) and electron backscattering diffraction (EBSD) techniques. Furthermore, the impact of thermal stresses on interfacial reliability of TSV structures was investigated by a shear-lag cohesive zone model that predicts the critical temperatures and critical via diameters.Microelectronics Research Cente