A New Three-Dimensional (3d) Particle Coincidence Imaging System And Its Applications In Strong Field Studies Of Reaction Dynamics In Atoms And Molecules

Electron‐electron interaction is an important and interesting research theme both in chemistry and physics. Experimental study of electron correlation is hindered by the long dead time (the time within which no more than two electrons can be detected) of electron detection system. We developed a new three‐dimensional (3D) particle coincidence imaging system to remove this restriction. The detection system employs a new strategy: It uses a fast‐frame camera to record positional information on 2D MCPs/phosphor detector (so the particle velocities in two dimensions can be measured); It utilizes a high‐speed digitizer to pick up the signal from MCP lead, off‐line analysis is performed on the waveform recorded by the digitizer to get time information (so the velocity in third dimension is measured) with best resolution and accuracy. This particle coincidence imaging system has three major breakthroughs: It achieved 0.64 ns dead time for electron detection; It’s also possible to have true zero dead with less than 1 ns TOF uncertainty; The best TOF resolution reaches 32 ps. This detection system is then implemented in photoion‐photoelectron coincidence detection apparatus to study electron correlation (the main goal) and dynamics in dissociative double ionization. We also developed a new method to probe orbital alignment of atoms in photodissociation by strong field ionization

Performance comparison between signal digitizers and low-cost digital oscilloscopes: spectroscopic, pulse shape discrimination and timing capabilities for nuclear detectors

Signal digitizers revolutionized the approach to the electronics readout of radiation detectors in Nuclear Physics. These highly specialized pieces of equipment are designed to acquire the signals that are characteristic of the detectors in nuclear physics experiments. The functions of the several modules that were once needed for signal acquisition, can now be substituted by a single digitizer. As suggested by the name, with such readout modules, signals are first digitized (i.e. the signal waveform is sampled and converted to a digital representation) and then either stored or analyzed on-the-fly. The performances can be comparable or better than the traditional analog counterparts, in terms of energy, time resolution, and acquisition rate. In this work, we investigate the use of general-purpose digital oscilloscopes as signal digitizers for nuclear detectors. In order to have a proper comparison, we employ a distributed data acquisition system (DAQ), that standardizes the interface between the hardware and the on-line data analysis. The signals, from a set of typical radiation detectors, are digitized and analyzed with the very same algorithms in order to avoid biases due to different software analysis. We compare two traditional signal digitizers (CAEN DT5725 and CAEN DT5751) to two low-cost digital oscilloscopes (Digilent Analog Discovery 2, and Red Pitaya STEMLab 125-14), in terms of their capabilities for spectroscopy (energy resolution), time resolution, pulse shape discrimination, and maximum acquisition rate.Comment: 17 pages, 8 figures, 4 tables, Prepared for submission to JINS

3d Momentum Imaging Spectroscopy Probing Of Strong-Field Molecular And Surface Dynamics

Electron-ion coincidence measurements in combination with 3-dimensional (3D) momentum imaging can provide comprehensive 3D-momentum information to unravel multichannel photoionization/dissociation processes, and thus is an effective tool to investigate atomic/molecular dynamics. A camera-based 3D coincidence momentum imaging system and the velocity mapping imaging (VMI) based machine were introduced in Chapter 2. Studies of strong field dissociative single and double ionization of relatively large molecules camphor and 2-phenylethyl-N, N-dimethylamine (PENNA) were carried out and illustrated in Chapter 3. We demonstrated the main products of double ionization of PENNA were singlet diradicals. In Chapter 4, a novel angle resolved-photoemission spectroscopy based on VMI apparatus was demonstrated. We employed this method to study multiphoton photoemission in thin metal films (Al and Cu), and hot carrier decay dynamics in graphene, in which unprecedented long hot carrier decay dynamics were observed (\u3e 1 ns)

Multiplicity counting using organic scintillators to distinguish neutron sources: An advanced teaching laboratory

In this advanced instructional laboratory, students explore complex detection systems and nondestructive assay techniques used in the field of nuclear physics. After setting up and calibrating a neutron detection system, students carry out timing and energy deposition analyses of radiation signals. Through the timing of prompt fission neutron signals, multiplicity counting is used to carry out a special nuclear material (SNM) nondestructive assay. Our experimental setup is comprised of eight trans-stilbene organic scintillation detectors in a well-counter configuration, and measurements are taken on a spontaneous fission source as well as two ({\alpha},n) sources. By comparing each source's measured multiplicity distribution, the resulting measurements of the ({\alpha},n) sources can be distinguished from that of the spontaneous fission source. Such comparisons prevent the spoofing, i.e., intentional imitation, of a fission source by an ({\alpha},n) neutron source. This instructional laboratory is designed for nuclear engineering and physics students interested in organic scintillators, neutron sources, and nonproliferation radiation measurement techniques.Comment: 29 pages, 17 figures, pre-proof accepted to AJP, AJP number AJP22-AR-01524R2 (DOI: 10.1119/5.0139531

A Source-Based Test-Bed for Fast-Neutron Irradiation

The "3He crisis" has resulted in a major effort worldwide to develop replacement neutron-detector technologies. Such technologies are in their infancy and need to be thoroughly tested before becoming mainstream. Neutron sources for controlled irradiation include accelerators, nuclear reactors and radioactive sources. Neutrons produced in nuclear reactors and at accelerators have a very high cost per neutron. In contrast, radioactive sources produce neutrons at a significantly lower cost per neu- tron and with a substantially lower cost of entry. A drawback associated with radioac- tive sources is the associated isotropic mixed neutron/gamma-ray field. This work in- troduces a cost-efficient test-bed for the production of 2-7 MeV neutrons based on an 241Am/9Be source, with the aim of lowering the barrier for precision neutron testing of detector technologies. Well-understood nuclear physics coincidence and time-of- flight measurement techniques are applied to unfold the mixed neutron/gamma-ray field and unambiguously identify the energies of the neutrons on an event-by-event basis

Development of a silicon photomultiplier based innovative and low cost positron emission tomography scanner.

The Silicon Photomultiplier (SiPM) is a state-of-the-art semiconductor photodetector consisting of a high density matrix (up to 104) of independent pixels of micro-metric dimension (from 10 \u3bcm to 100 \u3bcm) which form a macroscopic unit of 1 to 6 mm2 area. Each pixel is a single-photon avalanche diode operated with a bias voltage of a few volts above the breakdown voltage. When a charge carrier is generated in a pixel by an incoming photon or a thermal effect, a Geiger discharge confined to that pixel is initiated and an intrinsic gain of about 106 is obtained. The output signal of a pixel is the same regardless of the number of interacting photons and provide only a binary information. Since the pixels are arranged on a common Silicon substrate and are connected in parallel to the same readout line, the SiPM combined output response corresponds to the sum of all fired pixel currents. As a result, the SiPM as a whole is an analogue detector, which can measure the incoming light intensity. Nowadays a great number of companies are investing increasing efforts in SiPM detector performances and high quality mass production. SiPMs are in rapid evolution and benefit from the tremendous development of the Silicon technology in terms of cost production, design flexibility and performances. They have reached a high single photon detection sensitivity and photon detection efficiency, an excellent time resolution, an extended dynamic range. They require a low bias voltage and have a low power consumption, they are very compact, robust, flexible and cheap. Considering also their intrinsic insensitivity to magnetic field they result to have an extremely high potential in fundamental and applied science (particle and nuclear physics, astrophysics, biology, environmental science and nuclear medicine) and industry. The SiPM performances are influenced by some effects, as saturation, afterpulsing and crosstalk, which lead to an inherent non-proportional response with respect to the number of incident photons. Consequently, it is not trivial to relate the measured electronic signal to the corresponding light intensity. Since for most applications it is desirable to qualify the SiPM response (i.e in order to properly design a detector for a given application, perform corrections on measurements or on energy spectra, calibrate a SiPM for low light measurements, predict detector performance) the implementation of characterization procedures plays a key role. The SiPM field of application that has been considered in this thesis is the Positron Emission Tomography (PET). PET represents the most advanced in-vivo nuclear imaging modality: it provides functional information of the physiological and molecular processes of organs and tissues. Thanks to its diagnostic power, PET has a recognized superiority over all other imaging modalities in oncology, neurology and cardiology. SiPMs are usually successfully employed for the PET scanners because they allow the measurement of the Time Of Flight of the two coincidence photons to improve the signal to noise ratio of the reconstructed images. They also permit to perfectly combine the functional information with the anatomical one by inserting the PET scanner inside the Magnetic Resonance Imaging device. Recently, PET technology has also been applied to preclinical imaging to allow non invasive studies on small animals. The increasing demand for preclinical PET scanner is driven by the fact that small animals host a large number of human diseases. In-vivo imaging has the advantage to enable the measurement of the radiopharmaceutical distribution in the same animal for an extended period of time. As a result, PET represents a powerful research tool as it offers the possibility to study the abnormalities at the origin of a disease, understand its dynamics, evaluate the therapeutic response and develop new drugs and treatments. However, the cost and the complexity of the preclinical scanners are limiting factors for the spread of PET technology: 70-80% of small-animal PET is concentrated in academic or government research laboratories. The EasyPET concept proposed in this Thesis, protected under a patent filed by Aveiro University, aims to achieve a simple and affordable preclinical PET scanner. The innovative concept is based on a single pair of detector kept collinear during the whole data acquisition and a moving mechanism with two degrees of freedom to reproduce the functionalities of an entire PET ring. The main advantages are in terms of the reduction of the complexity and cost of the PET system. In addition the concept is bound to be robust against acollinear photoemission, scatter radiation and parallax error. The sensitivity is expected to represent a fragility due to the reduced geometrical acceptance. This drawback can be partially recovered by the possibility to accept Compton scattering events without introducing image degradation effects, thanks to the sensor alignment. A 2D imaging demonstrator has been realized in order to assess the EasyPET concept and its performance has been analyzed in this Thesis to verify the net balance between competing advantages and drawbacks. The demonstrator had a leading role in the outreach activity to promote the EasyPET concept and a significant outcome is represented by the new partners that recently joined the collaboration. The EasyPET has been licensed to Caen S.p.a. and, thanks to the participation of Nuclear Instruments to the electronic board re-designed, a new prototype has been realized with additional improvements concerning the mechanics and the control software. In this Thesis the prototype functionalities and performances are reported as a result of a commissioning procedure. The EasyPET will be commercialized by Caen S.p.a. as a product for the educational market and it will be addressed to high level didactic laboratories to show the operating principles and technology behind the PET imaging. The topics mentioned above will be examined in depth in the following Chapters according to the subsequent order. In Chapter 1 the Silicon Photomultiplier will be described in detail, from their operating principle to their main application fields passing through the advantages and the drawback effects connected with this type of sensor. Chapter 2 is dedicated to a SiPM standard characterization method based on the staircase and resolving power measurement. A more refined analysis involves the Multi-Photon spectrum, obtained by integrating the SiPM response to a light pulse. It exploits the SiPM single photon sensitivity and its photon number resolving capability to measure some of its properties of general interest for a multitude of potential applications, disentangling the features related to the statistics of the incident light. Chapter 3 reports another SiPM characterization method which implements a post-processing of the digitized SiPM waveforms with the aim of extracting a full picture of the sensor characteristics from a unique data-set. The procedure is very robust, effective and semi-automatic and suitable for sensors of various dimensions and produced by different vendors. Chapter 4 introduces the Positron Emission Tomography imaging: its principle, applications, related issues and state of the art of PET scanner will be explained. Chapter 5 deals with the preclinical PET, reporting the benefits and the technological challenges involved, the performance of the commercially available small animal PET scanners, the main applications and the frontier research in this field. In Chapter 6 the EasyPET concept is introduced. In particular, the basic idea behind the operating principle, the design layout and the image reconstruction will be illustrated and then assessed through the description and the performance analysis of the EasyPET proof of concept and demonstrator. The effect of the use of different sensor to improve the light collection and the coincidence detection efficiency, together with the analysis of the importance of the sensor and the crystal alignment will be reported in Chapter 7. The design, the functionalities and the commissioning of the EasyPET prototype addressed to the educational market will be defined in Chapter 8. Finally, Chapter 9 contains a summary of the conclusions and an outlook of the future research studies