Chain-Selective and Regioselective Ethylene and Styrene Dimerization Reactions Catalyzed by a Well-Defined Cationic Ruthenium-Hydride Complex: New Insights on the Styrene Dimerization Mechanism

The cationic ruthenium hydride complex [(η6-C6H6)(PCy3)(CO)RuH]+BF4− was found to be a highly regioselective catalyst for the ethylene dimerization reaction to give 2-butene products (TOF = 1910 h−1, \u3e95% selectivity for 2-butenes). The dimerization of styrene exclusively produced the head-to-tail dimer (E)-PhCH(CH3)CH═CHPh at an initial turnover rate of 2300 h−1. A rapid and extensive H/D exchange between the vinyl hydrogens of styrene-d8 and 4-methoxystyrene was observed within 10 min without forming the dimer products at room temperature. The inverse deuterium isotope effect of kH/kD = 0.77 ± 0.10 was measured from the first-order plots on the dimerization reaction of styrene and styrene-d8 in chlorobenzene at 70 °C. The pronounced carbon isotope effect on both vinyl carbons of styrene as measured by using Singleton’s method (13C(recovered)/13C(virgin) at C1 = 1.096 and C2 = 1.042) indicates that the C−C bond formation is the rate-limiting step for the dimerization reaction. The Eyring plot of the dimerization of styrene in the temperature range of 50−90 °C led to ΔH⧧ = 3.3(6) kcal/mol and ΔS⧧ = −35.5(7) eu. An electrophilic addition mechanism has been proposed for the dimerization of styrene

Linear Chains of Styrene and Methyl-Styrene Molecules and their Heterojunctions on Silicon: Theory and Experiment

We report on the synthesis, STM imaging and theoretical studies of the structure, electronic structure and transport properties of linear chains of styrene and methyl-styrene molecules and their heterojunctions on hydrogen-terminated dimerized silicon (001) surfaces. The theory presented here accounts for the essential features of the experimental STM data including the nature of the corrugation observed along the molecular chains and the pronounced changes in the contrast between the styrene and methyl-styrene parts of the molecular chains that are observed as the applied bias is varied. The observed evolution with applied bias of the STM profiles near the ends of the molecular chains is also explained. Calculations are also presented of electron transport along styrene linear chains adsorbed on the silicon surface at energies in the vicinity of the molecular HOMO and LUMO levels. For short styrene chains this lateral transport is found to be due primarily to direct electron transmission from molecule to molecule rather than through the silicon substrate, especially in the molecular LUMO band. Differences between the calculated position-dependences of the STM current around a junction of styrene and methyl-styrene molecular chains under positive and negative tip bias are related to the nature of lateral electron transmission along the molecular chains and to the formation in the LUMO band of an electronic state localized around the heterojunction.Comment: 17 pages plus 11 figures. To appear in Physical Review

Novel ETFE based radiation grafted poly(styrene sulfonic acid-co-methacrylonitrile) proton conducting membranes with increased stability

Styrene radiation grafted ETFE based proton conducting membranes are subject to degradation under fuel cell operating conditions and show a poor stability. Lifetimes exceeding 250 h can only be achieved with crosslinked membranes. In this study, a novel approach based on the increase of the intrinsic oxidative stability of uncrosslinked membranes is reported. Hence, the co-grafting of styrene with methacrylonitrile (MAN), which possesses a protected α-position and strong dipolar pendant nitrile group, onto 25 μm ETFE base film was investigated. Styrene/MAN co-grafted membranes were compared to a styrene based membrane in durability tests in single H2/O2 fuel cells. It is shown that the incorporation of MAN considerably improves the chemical stability, yielding fuel cell lifetimes exceeding 1000 h. The membrane preparation based on the co-grafting of styrene and MAN offers the prospect of tuning the MAN content and introduction of a crosslinker to enhance the oxidative stability of the resulting fuel cell membranes

Structure and dielectric properties of electroactive tetraaniline grafted non-polar elastomers

Intrinsic modification of polybutadiene and block copolymer styrene–butadiene–styrene with the electrically conducting emeraldine salt of tetraaniline (TANI) via a three-step grafting method, is reported in this work. Whilst the TANI oligomer grafted at a similar rate to both polybutadiene and styrene–butadiene–styrene under the same conditions, the resulting elastomers exhibited vastly different properties. 1 mol% TANI-PB exhibited an increased relative permittivity of 5.9, and a high strain at break of 156%, whilst 25 mol% TANI-SBS demonstrated a relative permittivity of 6.2 and a strain at break of 186%. The difference in the behaviour of the two polymers was due to the compatibilisation of TANI by styrene in SBS through π-π stacking, which prevented the formation of a conducting TANI network in SBS at. Without the styrene group, TANI-PB formed a phase separated structure with high levels of TANI grafting. Overall, it was concluded that the polymer chain structure, the morphology of the modified elastomers, and the degree of grafting of TANI, had the greatest effect on the mechanical and dielectric properties of the resultant elastomers. This work paves the way for an alternative approach to the extrinsic incorporation of conducting groups into unsaturated elastomers, and demonstrates dielectric elastomers with enhanced electrical properties for use in actuation devices and energy harvesting applications

Side chain alkylation of toluene with methanol over basic zeolites - novel production route towards styrene?

Styrene is an important monomer for the production of different types of (co-) polymers that are used in, e.g., toys, medical devices, food packaging, paper coatings etc. Styrene is produced with several different industrial processes. In 1998, the production of styrene monomer was approximately 21 million tons that are produced or used by more than 15,000 plants worldwide. Two of the largest production processes are described in Chapter 1 and both have their major drawbacks. These drawbacks have prompted researchers (academic and industrial) to study other styrene synthesis routes. Two possible synthesis routes are introduced in Chapter 1. One of these possibilities is\ud the side chain alkylation of toluene with methanol (MeOH) using basic zeolites. The toluene side chain alkylation reaction with methanol was first discovered by Sidorenko et al. (Dokl. Akad. Nauk. SSSR 1967, 173, 132) in the mid sixties. Since then researchers all over the world have tried to improve the styrene productivity. Major drawbacks are the high methanol conversion to byproducts like CO, H2, and dimethyl ether (DME) and the low yield of styrene. This thesis describes our efforts to understand the fundamentals of the interaction between\ud methanol and the zeolite host and its reaction with toluene

Identification of a Novel Self-Sufficient Styrene Monooxygenase from Rhodococcus opacus 1CP.

Sequence analysis of a 9-kb genomic fragment of the actinobacterium Rhodococcus opacus 1CP led to identification of an open reading frame encoding a novel fusion protein, StyA2B, with a putative function in styrene metabolism via styrene oxide and phenylacetic acid. Gene cluster analysis indicated that the highly related fusion proteins of Nocardia farcinica IFM10152 and Arthrobacter aurescens TC1 are involved in a similar physiological process. Whereas 413 amino acids of the N terminus of StyA2B are highly similar to those of the oxygenases of two-component styrene monooxygenases (SMOs) from pseudomonads, the residual 160 amino acids of the C terminus show significant homology to the flavin reductases of these systems. Cloning and functional expression of His10-StyA2B revealed for the first time that the fusion protein does in fact catalyze two separate reactions. Strictly NADH-dependent reduction of flavins and highly enantioselective oxygenation of styrene to (S)-styrene oxide were shown. Inhibition studies and photometric analysis of recombinant StyA2B indicated the absence of tightly bound heme and flavin cofactors in this self-sufficient monooxygenase. StyA2B oxygenates a spectrum of aromatic compounds similar to those of two-component SMOs. However, the specific activities of the flavin-reducing and styrene-oxidizing functions of StyA2B are one to two orders of magnitude lower than those of StyA/StyB from Pseudomonas sp. strain VLB120

TGA/FTIR: An Extremely Useful Technique for Studying Polymer Degradation

Thermogravimetric analysis coupled to Fourier transform infrared spectroscopy, TGA/FTIR, has been used to probe the degradation of several polymeric systems. These include poly(methyl methacrylate) in the presence of various additives, graft copolymers of acrylonitrile-butadiene-styrene and styrene-butadiene with sodium methacrylate and styrene with acrylonitrile, blends of styrene-butadiene block copolymers with poly(vinylphosphonic acid) and poly(vinylsulfonic acid), and cross-linked polystyrenes. Additives may interact with poly(methyl methacrylate) by coordination to the carbonyl oxygen to a Lewis acid and the subsequent transfer of an electron from the polymer chain to the metal atom or by the formation of a radical which can trap the degrading radicals before they can undergo further degradation. When an inorganic char-former is graft copolymerized onto a polymer, there is a good correlation between TGA behavior in an inert atmosphere and thermal stability in air, but this is not true when the char is largely carbonific

Preparation and characterization of Styrene-Methyl Methacrylate in Deproteinized Natural Rubber Latex (SMMA-DPNR)

The graft polymerization of Styrene and Methyl Methacrylate (MMA) onto deproteinized natural rubber latex (SMMA-DPNR) was carried out using ammonium peroxy disulfate (N2H8O8S2) as an initiator. The suitable reaction conditions based on the higher monomer conversion was determined. The SMMA-DPNR at 6 hours reaction time was successfully prepared with degree of conversion more than 99 %. The copolymers composition of the resultant SMMA-DPNR was obtained using 1H-NMR Spectroscopy. As expected, composition of styrene in DPNR was higher than that of MMA due to the higher reactivity ratio of styrene monomer as compared to MMA monomer and the structure of the NR backbone

Low Temperature Photo-oxidation of Chloroperoxidase Compound II

Oxidation of the heme-thiolate enzyme chloroperoxidase (CPO) from Caldariomyces fumago with peroxynitrite (PN) gave the Compound II intermediate, which was photo-oxidized with 365 nm light to give a reactive oxidizing species. Cryo-solvents at pH ≈ 6 were employed, and reactions were conducted at temperatures as low as − 50 °C. The activity of CPO as evaluated by the chlorodimedone assay was unaltered by treatment with PN or by production of the oxidizing transient and subsequent reaction with styrene. EPR spectra at 77 K gave the amount of ferric protein at each stage in the reaction sequence. The PN oxidation step gave a 6:1 mixture of Compound II and ferric CPO, the photolysis step gave an approximate 1:1 mixture of active oxidant and ferric CPO, and the final mixture after reaction with excess styrene contained ferric CPO in 80% yield. In single turnover reactions at − 50 °C, styrene was oxidized to styrene oxide in high yield. Kinetic studies of styrene oxidation at − 50 °C displayed saturation kinetics with an equilibrium constant for formation of the complex of Kbind = 3.8 × 104 M− 1 and an oxidation rate constant of kox = 0.30 s− 1. UV–Visible spectra of mixtures formed in the photo-oxidation sequence at ca. − 50 °C did not contain the signature Q-band absorbance at 690 nm ascribed to CPO Compound I prepared by chemical oxidation of the enzyme, indicating that different species were formed in the chemical oxidation and the photo-oxidation sequence

Heat resistant polymers of oxidized styrylphosphine

Homopolymers, copolymers and terpolymers of a styrene based monomer are prepared by polymerizing at least one oxidized styrylphosphine monomer or by polymerizing p-diphenylphosphinestyrene and then oxidizing the polymerized monomer with an organoazide. Copolymers can also be prepared by copolymerizing styrene with at least one oxidized styrylphosphine monomer. Flame resistant vinyl based polymers whose degradation products are non toxic and non corrosive are obtained