451 research outputs found

    MeshScan: a Fast and Efficient Handoff Scheme for IEEE 802.11 Wireless Mesh Networks

    Get PDF
    As a next generation network solution, Wireless Mesh Networks (WMN) provides fast Internet access to a large area, which is from university campus to city scale. In order to provide an uninterrupted Internet experience to a mobile client, a process called handoff is required to maintain the network connection from one Mesh Node (MN) to another MN. Ideally, handoff should be completely transparent to mobile users. A critical application like VoIP will require a handoff capability that transfers a call from one mesh node (MN) to another in less than 50 msec. However the current IEEE 802.11 standards do not address the handoff well. Studies have revealed that standard handoff on IEEE 802.11 WLANs incurs a latency of the order of hundreds of milliseconds to several seconds. Moreover, the discovery step in the handoff process accounts for more than 99% of this latency. The study addresses the latency in the discovery step by introducing an efficient and powerful client-side scan technique called MeshScan which replaces the discovery step with a unicast scan that transmits Authentication Request frames to potential MNs. A prototype of MeshScan has been developed based on the MadWifi WLAN driver on Linux operating systems. The feasibility of MeshScan to support fast handoff in WMNs has been demonstrated through extensive computer simulations and experiments under same given conditions. The results from the simulations and experiments show that the latency associated with handoff can be reduced from seconds to a few milliseconds by using the MeshScan technique. Furthermore, it is shown that MeshScan can continue to function effectively even under heavy traffic loads

    Mobile IP movement detection optimisations in 802.11 wireless LANs

    Get PDF
    The IEEE 802.11 standard was developed to support the establishment of highly flexible wireless local area networks (wireless LANs). However, when an 802.11 mobile node moves from a wireless LAN on one IP network to a wireless LAN on a different network, an IP layer handoff occurs. During the handoff, the mobile node's IP settings must be updated in order to re-establish its IP connectivity at the new point of attachment. The Mobile IP protocol allows a mobile node to perform an IP handoff without breaking its active upper-layer sessions. Unfortunately, these handoffs introduce large latencies into a mobile node's traffic, during which packets are lost. As a result, the mobile node's upper-layer sessions and applications suffer significant disruptions due to this handoff latency. One of the main components of a Mobile IP handoff is the movement detection process, whereby a mobile node senses that it is attached to a new IP network. This procedure contributes significantly to the total Mobile IP handover latency and resulting disruption. This study investigates different mechanisms that aim to lower movement detection delays and thereby improve Mobile IP performance. These mechanisms are considered specifically within the context of 802.11 wireless LANs. In general, a mobile node detects attachment to a new network when a periodic IP level broadcast (advertisement) is received from that network. It will be shown that the elimination of this dependence on periodic advertisements, and the reliance instead on external information from the 802.11 link layer, results in both faster and more efficient movement detection. Furthermore, a hybrid system is proposed that incorporates several techniques to ensure that movement detection performs reliably within a variety of different network configurations. An evaluation framework is designed and implemented that supports the assessment of a wide range of movement detection mechanisms. This test bed allows Mobile IP handoffs to be analysed in detail, with specific focus on the movement detection process. The performance of several movement detection optimisations is compared using handoff latency and packet loss as metrics. The evaluation framework also supports real-time Voice over IP (VoIP) traffic. This is used to ascertain the effects that different movement detection techniques have on the output voice quality. These evaluations not only provide a quantitative performance analysis of these movement detection mechanisms, but also a qualitative assessment based on a VoIP application

    MIPv6 Experimental Evaluation using Overlay Networks

    Get PDF
    The commercial deployment of Mobile IPv6 has been hastened by the concepts of Integrated Wireless Networks and Overlay Networks, which are present in the notion of the forthcoming generation of wireless communications. Individual wireless access networks show limitations that can be overcome through the integration of different technologies into a single unified platform (i.e., 4G systems). This paper summarises practical experiments performed to evaluate the impact of inter-networking (i.e. vertical handovers) on the Network and Transport layers. Based on our observations, we propose and evaluate a number of inter-technology handover optimisation techniques, e.g., Router Advertisements frequency values, Binding Update simulcasting, Router Advertisement caching, and Soft Handovers. The paper concludes with the description of a policy-based mobility support middleware (PROTON) that hides 4G networking complexities from mobile users, provides informed handover-related decisions, and enables the application of different vertical handover methods and optimisations according to context.Publicad

    A network mobility management architecture for a heteregeneous network environment

    Get PDF
    Network mobility management enables mobility of personal area networks and vehicular networks across heterogeneous access networks using a Mobile Router. This dissertation presents a network mobility management architecture for minimizing the impact of handoffs on the communications of nodes in the mobile network. The architecture addresses mobility in legacy networks without infrastructure support, but can also exploit infrastructure support for improved handoff performance. Further, the proposed architecture increases the efficiency of communications of nodes in the mobile network with counter parts in the fixed network through the use of caching and route optimization. The performance and costs of the proposed architecture are evaluated through empirical and numerical analysis. The analysis shows the feasibility of the architecture in the networks of today and in those of the near future.Verkkojen liikkuuvudenhallinta mahdollistaa henkilökohtaisten ja ajoneuvoihin asennettujen verkkojen liikkuvuuden heterogeenisessä verkkoympäristössä käyttäen liikkuvaa reititintä. Tämä väitöskirja esittää uuden arkkitehtuurin verkkojen liikkuvuudenhallintaan, joka minimoi verkonvaihdon vaikutuksen päätelaitteiden yhteyksiin. Vanhoissa verkoissa, joiden infrastruktuuri ei tue verkkojen liikkuvuutta, verkonvaihdos täytyy hallita liikkuvassa reitittimessa. Standardoitu verkkojen liikkuvuudenhallintaprotokolla NEMO mahdollistaa tämän käyttäen ankkurisolmua kiinteässä verkossa pakettien toimittamiseen päätelaitteiden kommunikaatiokumppaneilta liikkuvalle reitittimelle. NEMO:ssa verkonvaihdos aiheuttaa käynnissä olevien yhteyksien keskeytymisen yli sekunnin mittaiseksi ajaksi, aiheuttaen merkittävää häiriötä viestintäsovelluksille. Esitetyssä arkkitehtuurissa verkonvaihdon vaikutus minimoidaan varustamalla liikkuva reititin kahdella radiolla. Käyttäen kahta radiota liikkuva reititin pystyy suorittamaan verkonvaihdon keskeyttämättä päätelaitteiden yhteyksiä, mikäli verkonvaihtoon on riittävästi aikaa. Käytettävissa oleva aika riippuu liikkuvan reitittimen nopeudesta ja radioverkon rakenteesta. Arkkitehtuuri osaa myös hyödyntää infrastruktuurin tukea saumattomaan verkonvaihtoon. Verkkoinfrastruktuurin tuki nopeuttaa verkonvaihdosprosessia, kasvattaenmaksimaalista verkonvaihdos tahtia. Tällöin liikkuva reitin voi käyttää lyhyen kantaman radioverkkoja, joiden solun säde on yli 80m, ajonopeuksilla 90m/s asti ilman, että verkonvaihdos keskeyttää päätelaitteiden yhteyksiä. Lisäksi ehdotettu arkkitehtuuri tehostaa kommunikaatiota käyttäen cache-palvelimia liikkuvassa ja kiinteässä verkossa ja optimoitua reititystä liikkuvien päätelaitteiden ja kiinteässä verkossa olevien kommunikaatiosolmujen välillä. Cache-palvelinarkkitehtuuri hyödyntää vapaita radioresursseja liikkuvan verkon cache-palvelimen välimuistin päivittämiseen. Heterogeenisessä verkkoympäristossä cache-palvelimen päivitys suoritetaan lyhyen kantaman laajakaistaisia radioverkkoja käyttäen. Liikkuvan reitittimen siirtyessä laajakaistaisen radioverkon peitealueen ulkopuolelle päätelaitteille palvellaan sisältöä, kuten www sivuja tai videota cache-palvelimelta, säästäen laajemman kantaman radioverkon rajoitetumpia resursseja. Arkkitehtuurissa käytetään optimoitua reititystä päätelaitteiden ja niiden kommunikaatiokumppaneiden välillä. Optimoitu reititysmekanismi vähentää liikkuvuudenhallintaan käytettyjen protokollien langattoman verkon resurssien kulutusta. Lisäksi optimoitu reititysmekanismi tehostaa pakettien reititystä käyttäen suorinta reittiä kommunikaatiosolmujen välillä. Esitetyn arkkitehtuurin suorituskyky arvioidaan empiirisen ja numeerisen analyysin avulla. Analyysi arvioi arkkitehtuurin suorituskykyä ja vertaa sitä aikaisemmin ehdotettuihin ratkaisuihin ja osoittaa arkkitehtuurin soveltuvan nykyisiin ja lähitulevaisuuden langattomiin verkkoihin.reviewe

    Experimenting with commodity 802.11 hardware: overview and future directions

    Get PDF
    The huge adoption of 802.11 technologies has triggered a vast amount of experimentally-driven research works. These works range from performance analysis to protocol enhancements, including the proposal of novel applications and services. Due to the affordability of the technology, this experimental research is typically based on commercial off-the-shelf (COTS) devices, and, given the rate at which 802.11 releases new standards (which are adopted into new, affordable devices), the field is likely to continue to produce results. In this paper, we review and categorise the most prevalent works carried out with 802.11 COTS devices over the past 15 years, to present a timely snapshot of the areas that have attracted the most attention so far, through a taxonomy that distinguishes between performance studies, enhancements, services, and methodology. In this way, we provide a quick overview of the results achieved by the research community that enables prospective authors to identify potential areas of new research, some of which are discussed after the presentation of the survey.This work has been partly supported by the European Community through the CROWD project (FP7-ICT-318115) and by the Madrid Regional Government through the TIGRE5-CM program (S2013/ICE-2919).Publicad

    Why It Takes So Long to Connect to a WiFi Access Point

    Full text link
    Today's WiFi networks deliver a large fraction of traffic. However, the performance and quality of WiFi networks are still far from satisfactory. Among many popular quality metrics (throughput, latency), the probability of successfully connecting to WiFi APs and the time cost of the WiFi connection set-up process are the two of the most critical metrics that affect WiFi users' experience. To understand the WiFi connection set-up process in real-world settings, we carry out measurement studies on 55 million mobile users from 44 representative cities associating with 77 million APs in 0.40.4 billion WiFi sessions, collected from a mobile "WiFi Manager" App that tops the Android/iOS App market. To the best of our knowledge, we are the first to do such large scale study on: how large the WiFi connection set-up time cost is, what factors affect the WiFi connection set-up process, and what can be done to reduce the WiFi connection set-up time cost. Based on the measurement analysis, we develop a machine learning based AP selection strategy that can significantly improve WiFi connection set-up performance, against the conventional strategy purely based on signal strength, by reducing the connection set-up failures from 33%33\% to 3.6%3.6\% and reducing 80%80\% time costs of the connection set-up processes by more than 1010 times.Comment: 11pages, conferenc
    corecore