An ABS control logic based on wheel force measurement

The paper presents an anti-lock braking system (ABS) control logic based on the measurement of the longitudinal forces at the hub bearings. The availability of force information allows to design a logic that does not rely on the estimation of the tyre-road friction coefficient, since it continuously tries to exploit the maximum longitudinal tyre force. The logic is designed by means of computer simulation and then tested on a specific hardware in the loop test bench: the experimental results confirm that measured wheel force can lead to a significant improvement of the ABS performances in terms of stopping distance also in the presence of road with variable friction coefficien

Estudo de modelagem de veículos elétricos e estratégia de controle de torque para sistemas de frenagens regenerativa e antitravamento

Orientador: José Antenor PomilioTese (doutorado) - Universidade Estadual de Campinas, Faculdade de Engenharia Elétrica e de ComputaçãoResumo: Os veículos elétricos têm despertado crescente interesse devido à sua capacidade para reduzir a poluição no meio ambiente, usando elementos de energia elétrica acumulado em baterias e supercapacitores para o acionamento da máquina elétrica no lugar de um motor de combustão interna. Por outro lado, a baixa autonomia do veículo elétrico continua sendo uma barreira para seu sucesso comercial. Instituções automobilísticas junto com a Academia enfrentam esse desafio com diversas soluções para aumentar a energia disponível. Entre as possibilidades está a frenagem regenerativa. A frenagem regenerativa é um processo no qual recupera-se energia de um veículo durante as desacelerações. Esta pesquisa se concentra nas frenagens para diversas condições com mudanças da superficie da estrada, considerando o sistema de frenagem regenerativo e o sistema de antibloqueio. Analisamos e revisamos os aspectos básicos da modelagem de um veículo com/sem ABS, assim como o comportamento dinâmico das rodas e mostramos uma contribuição para o estudo do controle de torque na máquina e estratégias de controle para o torque distribuído na combinação e cooperação entre o torque elétrico e o mecânico, mesmo com mudanças do solo e de métodos de operação, como descidas, obtendo estabilidade do veículo e recuperação de energiaAbstract: The interest in electric vehicles has grown worldwide due to their efficiency for reducing environmental pollution, by using energy elements such as batteries and supercapacitors to drive the electric machine, instead of an internal combustion engine. Contrarily, the low vehicle autonomy remains a barrier to their commercial success. Therefore, automotive institutions together with academics face the challenge through various solutions to increase the available energy. The regenerative braking is one of the implementations that helps a better use of the stored energy. Regenerative braking is a process in which energy is recovered from a vehicle during decelerations. This research focuses on braking for various road surface conditions. Furthermore, it considers the regenerative braking and the anti-lock braking systems regarding energy recovery performance for friction coefficient changes. In this work, we will review and analyze the basic aspects of the modeling of a vehicle with or without ABS, as well as the dynamic behavior of wheels. We will also present a contribution to the study of torque control and control strategies for the torque distribution regarding combination and co-operation between electric and mechanical torque. This process is done despite changes in ground surfaces and operating methods such as downhill, leading to better performance in the flexibility of vehicle stability and in the recovery of powerDoutoradoEnergia EletricaDoutora em Engenharia Elétrica149810/2013-0CAPESCNP

Comparative assessment of vehicle anti-lock braking system operation using friction brake mechanisms and e-machine in the vehicle with electric drive of traction wheels

Study of the braking process of the vehicle with an electric machine in the traction wheels drive equipped with an anti-lock braking system (ABS), where the actuators are the electric machine and friction brake mechanisms, is a relevant task. This is related to the worldwide trending increase in the share of production of vehicles with an electric machine within the transmission. In this paper, the "traditional" ABS and two systems with different variants of usage of the electric machine and friction brake mechanisms as actuators are compared: 1. The electric machine fulfills the function of the wheel slip regulator; the friction brake mechanisms maintain constant pressure in the brake line, which depends on the tyre-road friction coefficient. 2. The friction brake mechanisms fulfill the function of the wheel slip regulator; the electric machine maintains the set brake torque. According to the study results, usage of the combined actuator system within the ABS allows reducing the braking distance significantly, raising the vehicle deceleration value and improving the driver's and passengers' comfort during braking

Passenger Car Active Braking System: Model and experimental validation (Part I)

This paper introduces a method to characterize the dynamic behavior of a normal production hydraulic brake system through experiments on a hardware-in-the-loop test bench for both modeling (part I) and control (part II) tasks. The activity is relative to the analysis, modeling, and control of anti-lock braking system and electronic stability control digital valves, and is aimed at obtaining reference tracking and disturbance-rejection performance similar to that achievable when using pressure proportional valves. The first part of this two-part study is focused on the development of a mathematical model that emulates the pressure dynamics inside a brake caliper when the inlet valve, outlet valve, and motor pump are controlled by digital or pulse width modulated signals. The model takes into account some inherent nonlinearities of these systems, e.g. the variation of fluid bulk modulus with pressure, while inlet and outlet valves together with the relay box are modeled as second-order systems with variable gains. The hardware-in-the-loop test rig is used for both parameter estimation and model validation; the parameters and model will be used for the control strategy development presented in the second part of this study

Development of a Fuzzy Slip Control System for Electric Vehicles with In-wheel Motors

Replicated with permission by SAE Copyright © 2017 SAE International. Further distribution of this material is not permitted without prior permission from SAE.A two-passenger all-wheel drive urban electric vehicle (AUTO21EV) with four direct-drive in-wheel motors and an active steering system has been designed and developed at the University of Waterloo. A novel fuzzy slip control system is developed for this vehicle using the advantage of four in-wheel motors. A conventional slip control system uses the hydraulic brake system in order to control the tire slip ratio, which is the difference between the wheel center velocity and the velocity of the tire contact patch along the wheel plane, thereby influencing the longitudinal dynamics of a vehicle. The advantage of the proposed fuzzy slip controller is that it acts as an ABS system by preventing the tires from locking up when braking, as a TCS by preventing the tires from spinning out when accelerating. More importantly, the proposed slip controller is also capable of replacing the entire hydraulic brake system of the vehicle by automatically distributing the braking force between the wheels using the available braking torque of the in-wheel motors. In this regard, the proposed fuzzy slip controller guarantees the highest traction or braking force on each wheel on every road condition by individually controlling the slip ratio of each tire with a much faster response time. The performance of the proposed fuzzy slip controller is confirmed by driving the AUTO21EV through several test maneuvers using a driver model in the simulation environment. As the final step, the fuzzy slip controller is implemented in a hardware- and operator-in-the-loop driving simulator and its performance and effectiveness is confirmed.Funding for this work was provided by the Natural Sciences and Engineering Research Council of Canada(NSERC) and a grant from AUTO21, a Canadian Network of Centres of Excellence