Fast word-level power models for synthesis of FPGA-based arithmetic

Published versio

Comprehensive Evaluation of Supply Voltage Underscaling in FPGA on-Chip Memories

In this work, we evaluate aggressive undervolting, i.e., voltage scaling below the nominal level to reduce the energy consumption of Field Programmable Gate Arrays (FPGAs). Usually, voltage guardbands are added by chip vendors to ensure the worst-case process and environmental scenarios. Through experimenting on several FPGA architectures, we measure this voltage guardband to be on average 39% of the nominal level, which in turn, delivers more than an order of magnitude power savings. However, further undervolting below the voltage guardband may cause reliability issues as the result of the circuit delay increase, i.e., start to appear faults. We extensively characterize the behavior of these faults in terms of the rate, location, type, as well as sensitivity to environmental temperature, with a concentration of on-chip memories, or Block RAMs (BRAMs). Finally, we evaluate a typical FPGA-based Neural Network (NN) accelerator under low-voltage BRAM operations. In consequence, the substantial NN energy savings come with the cost of NN accuracy loss. To attain power savings without NN accuracy loss, we propose a novel technique that relies on the deterministic behavior of undervolting faults and can limit the accuracy loss to 0.1% without any timing-slack overhead.Peer ReviewedPostprint (author's final draft

Analysis and Evaluation of PUF-based SoC Designs for Security Applications

This paper presents a critical analysis and statistical evaluation of two categories of Physically Unclonable Functions (PUFs): ring oscillator PUF and a new proposed adapted latch based PUF. The main contribution is that of measuring the properties of PUF which provide the basic information for using them in security applications. The original method involved the conceptual design of adapted latch based PUFs and ring oscillator PUFs in combination with peripheral devices in order to create an environment for experimental analysis of PUF properties. Implementation, testing and analysis of results followed. This approach has applications on high level security

A Survey of FPGA Optimization Methods for Data Center Energy Efficiency

This article provides a survey of academic literature about field programmable gate array (FPGA) and their utilization for energy efficiency acceleration in data centers. The goal is to critically present the existing FPGA energy optimization techniques and discuss how they can be applied to such systems. To do so, the article explores current energy trends and their projection to the future with particular attention to the requirements set out by the European Code of Conduct for Data Center Energy Efficiency. The article then proposes a complete analysis of over ten years of research in energy optimization techniques, classifying them by purpose, method of application, and impacts on the sources of consumption. Finally, we conclude with the challenges and possible innovations we expect for this sector.Comment: Accepted for publication in IEEE Transactions on Sustainable Computin

Delay Measurements and Self Characterisation on FPGAs

This thesis examines new timing measurement methods for self delay characterisation of Field-Programmable Gate Arrays (FPGAs) components and delay measurement of complex circuits on FPGAs. Two novel measurement techniques based on analysis of a circuit's output failure rate and transition probability is proposed for accurate, precise and efficient measurement of propagation delays. The transition probability based method is especially attractive, since it requires no modifications in the circuit-under-test and requires little hardware resources, making it an ideal method for physical delay analysis of FPGA circuits. The relentless advancements in process technology has led to smaller and denser transistors in integrated circuits. While FPGA users benefit from this in terms of increased hardware resources for more complex designs, the actual productivity with FPGA in terms of timing performance (operating frequency, latency and throughput) has lagged behind the potential improvements from the improved technology due to delay variability in FPGA components and the inaccuracy of timing models used in FPGA timing analysis. The ability to measure delay of any arbitrary circuit on FPGA offers many opportunities for on-chip characterisation and physical timing analysis, allowing delay variability to be accurately tracked and variation-aware optimisations to be developed, reducing the productivity gap observed in today's FPGA designs. The measurement techniques are developed into complete self measurement and characterisation platforms in this thesis, demonstrating their practical uses in actual FPGA hardware for cross-chip delay characterisation and accurate delay measurement of both complex combinatorial and sequential circuits, further reinforcing their positions in solving the delay variability problem in FPGAs

An adaptive method to tolerate soft errors in SRAM-based FPGAs

AbstractIn this paper, we present an adaptive method that is a combination of SEU-avoidance in CAD flow and adaptive redundancy to tolerate soft error effects in SRAM-based FPGAs. This method is based on the modification of T-VPack and VPR tools. Three different steps of these tools are modified for SEU-awareness: (1) clustering, (2) placement and (3) routing. Then we use the unused resources as redundancy. We have investigated the effect of this method on several MCNC benchmarks. This investigation has been performed using three experiments: (1) SEU-awareness in clustering with redundancy, (2) SEU-awareness in clustering and placement with redundancy and (3) SEU-awareness in clustering, placement and routing with redundancy. With a confidence level of 95%, the results show that, using each of these three experiments, the system failure rate of ten MCNC circuits has been decreased between 4.52% and 10.42%, between 10.25% and 21.63%, and between 10.48% and 24.39%, respectively

Power Efficient Data-Aware SRAM Cell for SRAM-Based FPGA Architecture

The design of low-power SRAM cell becomes a necessity in today\u27s FPGAs, because SRAM is a critical component in FPGA design and consumes a large fraction of the total power. The present chapter provides an overview of various factors responsible for power consumption in FPGA and discusses the design techniques of low-power SRAM-based FPGA at system level, device level, and architecture levels. Finally, the chapter proposes a data-aware dynamic SRAM cell to control the power consumption in the cell. Stack effect has been adopted in the design to reduce the leakage current. The various peripheral circuits like address decoder circuit, write/read enable circuits, and sense amplifier have been modified to implement a power-efficient SRAM-based FPGA

Design and application of reconfigurable circuits and systems

Open Acces