Structural health monitoring of asphalt pavements using smart sensor networks: A comprehensive review

Abstract Early, effective and continuous monitoring allows to reduce costs and to extend life of road infrastructure. For this reason, over the years, more and more efforts have been made to implement more advanced and effective monitoring systems at ever more contained costs, going from impractical manual and destructive methods through automated in vehicle equipment to the most recent wireless sensor network (WSN) embedded into the pavement. The purpose of this paper is to provide a comprehensive, up-to-date critical literature review of wireless sensor networks for pavement health monitoring, considering, also, the experience gained for wired sensor as fundamental point of reference. This work presents both the methodology used to collect and analyse the current bibliography and provides a description and comments fundamental characteristics of wireless sensor networks for pavement monitoring for damage detection purposes, among which energy supply, the detection method, the hardware and network architecture and the performance validation procedures. A brief analysis of other possible complementary applications of smart sensor networks, such as traffic and surface condition monitoring, is provided. Finally, a comment is provided on the gaps and possible directions that future research could follow to allow the extensive use of wireless sensor networks for pavement health condition monitoring

Towards Intelligent Tire and Self-Powered Sensing Systems

Tires are the interface between a vehicle and the ground providing forces and isolation to the vehicle. For vehicle safety, stability, maintenance, and performance, it is vital to estimate or measure tire forces, inflation pressure, and contact friction coefficient. Estimation methods can predict tire forces to some extent however; they fail in harsh maneuvers and are dependent on road surface conditions for which there is no robust estimation method. Measurement devices for tire forces exist for vehicle testing but at the cost of tens of thousands of dollars. Tire pressure-monitoring sensors (TPMS) are the only sensors available in newer and higher end vehicles to provide tire pressure, but there are no sensors to measure road surface condition or tire forces for production vehicles. With the prospect of autonomous driving on roads in near future, it is paramount to make the vehicles safe on any driving and road condition. This is only possible by additional sensors to make up for the driver’s cognitive and sensory system. Measuring road condition and tire forces especially in autonomous vehicles are vital in their safety, reliability, and public confidence in automated driving. Real time measurement of road condition and tire forces in buses and trucks can significantly improve the safety of road transportation system, and in miming/construction and off-road vehicles can improve performance, tire life and reduce operational costs. In this thesis, five different types of sensors are designed, modelled, optimized and fabricated with the objective of developing an intelligent tire. In order to design these sensors,~both electromagnetic generator (EMG) and triboelectric nanogenerators (TENG) are used. In the first two initial designed sensors, with the combination of EMG and TENG into a single package, two hybridized sensors are fabricated with promising potential for self-powered sensing. The potential of developed sensors are investigated for tire-condition monitoring system (TCMS). Considering the impressive properties of TENG units of the developed hybridized devices, three different flexible nanogenerators, only based on this newly developed technology, are developed for TCMS. The design, modelling, working mechanism, fabrication procedure, and experimental results of these TENG sensors are fully presented for applications in TCMS. Among these three fabricated sensors, one of them shows an excellent capability for TCMS because of its high flexibility, stable and high electrical output,and an encapsulated structure. The high flexibility of developed TENG sensor is a very appealing feature for TCMS, which cannot be found in any available commercial sensor. The fabricated TENG sensors are used for developing an intelligent tire module to be eventually used for road testing. Several laboratory and road tests are performed to study the capability of this newly developed TENG-based sensor for tire-condition monitoring system. However the development of this sensor is in its early stage, it shows a promising potential for installation into the hostile environment of tires and measuring tire-road interacting forces. A comparative studies are provided with respect to Michigan Scientific transducer to investigate the potential of this flexible nanogenerator for TCMS. It is worth mentioning that this PhD thesis presents one of the earliest works on the application of TENG-based sensor for a real-life system. Also, the potential of commercially available thermally and mechanically durable Micro Fiber Composite (MFC) sensor is experimentally investigated for TCMS with fabricating another set of intelligent tire. Several testing scenarios are performed to examine the potential of these sensors for TCMS taking into account a simultaneous measurement from Michigan Scientific transducer. Although both flexibility and the cost of this sensor is not comparable with the fabricated TENG device, they have shown a considerable and reliable performance for online measuring of tire dynamical parameters in different testing scenarios, as they can be used for both energy harvesting and sensing application in TCMS. The extensive road testing results based on the MFC sensors provide a valuable set of data for future research in TCMS. It is experimentally shown that MFC sensor can generate up to 1.4 $\mu W$ electrical power at the speed of 28 $[kph]$. This electrical output shows the high capability of this sensor for self-powered sensing application in TCMS. Results of this thesis can be used as a framework by researchers towards self-powered sensing system for real-world applications such as intelligent tires

Energy harvesting methods for transmission lines: a comprehensive review

Humanity faces important challenges concerning the optimal use, security, and availability of energy systems, particularly electrical power systems and transmission lines. In this context, data-driven predictive maintenance plans make it possible to increase the safety, stability, reliability, and availability of electrical power systems. In contrast, strategies such as dynamic line rating (DLR) make it possible to optimize the use of power lines. However, these approaches require developing monitoring plans based on acquiring electrical data in real-time using different types of wireless sensors placed in strategic locations. Due to the specific conditions of the transmission lines, e.g., high electric and magnetic fields, this a challenging problem, aggravated by the harsh outdoor environments where power lines are built. Such sensors must also incorporate an energy harvesting (EH) unit that supplies the necessary electronics. Therefore, the EH unit plays a key role, so when designing such electronic systems, care must be taken to select the most suitable EH technology, which is currently evolving rapidly. This work reviews and analyzes the state-of-the-art technology for EH focused on transmission lines, as it is an area with enormous potential for expansion. In addition to recent advances, it also discusses the research needs and challenges that need to be addressed. Despite the importance of this topic, there is still much to investigate, as this area is still in its infancy. Although EH systems for transmission lines are reviewed, many other applications could potentially benefit from introducing wireless sensors with EH capabilities, such as power transformers, distribution switches, or low- and medium-voltage power lines, among others.This research was funded by Ministerio de Ciencia e Innovación de España, grant number PID2020-114240RB-I00 and by the Generalitat de Catalunya, grant number 2017 SGR 967.Peer ReviewedPostprint (author's final draft

Editorial for Special Issue on “Electronic Systems and Energy Harvesting Methods for Automation, Mechatronics and Automotive”

none3noElectronic apparatus have become essential components of civil and industrial systems, including the automotive, home and building automation, Industrial IoT (Internet of Things) and control applications, and playing an essential role in improving security, efficiency, manageability, and rapid feedback [1–3]. Indeed, the increasing demands of electronic systems have led to innovations and findings in electronic networks for automotive and automation plants, replacing efficiently and securely mechanical and hydraulic sections [4]. Also, the researchers have focused their attention on meeting the increasing power demand of vehicles equipment, developing 42-V automotive systems. Moreover, smart buildings and homes represent a very actual research topic in the scientific community, aimed to improve energy conservation and the liveability of everyday life environments, thanks to IoT solutions [5]. In fact, smart homes and buildings comprise innovative solutions enabling communication between users and the infrastructure, as well as performing advanced monitoring tasks, like surveillance, light and water management, HVAC (heating, ventilation and air conditioning) system management, smart energy monitoring and elderly care. IoT technology employs sensors to detect the environmental temperature for the HVAC system, water and energy consumption, and health monitoring and decision-making systems to assist elderly people and detect fires [6,7]. The scientific community is concentrating their efforts to design innovative infrastructures, management models as well as operating scenarios to make production activities simpler and more efficient [8]. In this field, IoT is one of the key elements triggering this revolution, enabling communications between machines (M2M), thus creating a manufacturing environment human-free. The combination of M2M, IoT and CPS (cyber physical systems) makes the manufacturing systems more robust, reliable and efficient. Besides, cloud computing constitutes a powerful tool, promising to solve several difficult issues with previous productive architectures. For instance, in [9], a novel architecture integrating cloud computing, IoT, and smart devices, was presented. The model uses modern manufacturing technologies, allowing highly configurable, flexible manufacturing processes involving human and robotic participants. This Special Issue aimed to cover a wide range of disciplines and application fields, collecting innovative studies on advanced sensing and energy harvesting technologies and applications in automotive, automation and mechatronics fields. The introduced innovations could mitigate the impact of human activities on the environment and revolutionize the production process by employing eco-sustainable production models, preventing climate change and natural resources waste. A total of 5 papers have been published in this special issue; the paper covers a wide range of topics but is deemed relevant to the topics covered by the special issues. The authors are from geographically distributed countries such as Italy, Mexico, Spain, and China. This reflects the great impact of the proposed topic and the effective organization of the guest editorial team of this special issue.openPaolo Visconti, Nicola Ivan Giannoccaro, Roberto de FazioVisconti, Paolo; Giannoccaro, NICOLA IVAN; DE FAZIO, Robert

A critical analysis of research potential, challenges and future directives in industrial wireless sensor networks

In recent years, Industrial Wireless Sensor Networks (IWSNs) have emerged as an important research theme with applications spanning a wide range of industries including automation, monitoring, process control, feedback systems and automotive. Wide scope of IWSNs applications ranging from small production units, large oil and gas industries to nuclear fission control, enables a fast-paced research in this field. Though IWSNs offer advantages of low cost, flexibility, scalability, self-healing, easy deployment and reformation, yet they pose certain limitations on available potential and introduce challenges on multiple fronts due to their susceptibility to highly complex and uncertain industrial environments. In this paper a detailed discussion on design objectives, challenges and solutions, for IWSNs, are presented. A careful evaluation of industrial systems, deadlines and possible hazards in industrial atmosphere are discussed. The paper also presents a thorough review of the existing standards and industrial protocols and gives a critical evaluation of potential of these standards and protocols along with a detailed discussion on available hardware platforms, specific industrial energy harvesting techniques and their capabilities. The paper lists main service providers for IWSNs solutions and gives insight of future trends and research gaps in the field of IWSNs