171 research outputs found
Improvement of the linear quadratic regulator control applied to a DC-DC boost converter driving a permanent magnet direct current motor
This article discusses a new robust control technique that enables the DC-DC boost converter driving a permanent magnet direct current (PMDC) motor to operate in high static and dynamic performances. The new technique is based on the design of a both linear quadratic regulator (LQR) and linear quadratic regulator-proportional integral (LQR-PI) type controllers, which have the advantage of eliminating oscillations, overshoots and fluctuations on different characteristics in steady-state system operation. In order to increase the output voltage, the LQR regulator is combined with a first-order system represented in the form of a closed-loop transfer function, the latter raising the output voltage to 24 volts, this voltage is enough to drive the permanent magnet direct current motor. The contribution of this paper is the creation of a robust control system represented in the form of a hybrid corrector able to regulate steady-state and transient disturbances and oscillations as well as to increase DC-DC boost converter output voltage for the PMDC motor to operate at rated voltage. The results of the three control techniques are validated by MATLAB Simulink
Robust converter-fed motor control based on active rejection of multiple disturbances
In this work, an advanced motion controller is proposed for buck
converter-fed DC motor systems. The design is based on an idea of active
disturbance rejection control (ADRC) with its key component being a custom
observer capable of reconstructing various types of disturbances (including
complex, harmonic signals). A special formulation of the proposed design allows
the control action to be expressed in a concise and practically appealing form
reducing its implementation requirements. The obtained experimental results
show increased performance of the introduced approach over conventionally used
methods in tracking precision and disturbance rejection, while keeping similar
level of energy consumption. A stability analysis using theory of singular
perturbation further supports the validity of proposed control approach.Comment: 30 pages, 7 figures, 1 tabl
Induction Motors
AC motors play a major role in modern industrial applications. Squirrel-cage induction motors (SCIMs) are probably the most frequently used when compared to other AC motors because of their low cost, ruggedness, and low maintenance. The material presented in this book is organized into four sections, covering the applications and structural properties of induction motors (IMs), fault detection and diagnostics, control strategies, and the more recently developed topology based on the multiphase (more than three phases) induction motors. This material should be of specific interest to engineers and researchers who are engaged in the modeling, design, and implementation of control algorithms applied to induction motors and, more generally, to readers broadly interested in nonlinear control, health condition monitoring, and fault diagnosis
Recommended from our members
High performance disturbance observer based control system design for permanent magnet synchronous AC machine applications
This thesis was submitted for the award of Doctor of Philosophy and was awarded by Brunel University LondonAn electrical machine is one of the main workforces in different industries and serves them in various applications. Machine drive control design involves many technical issues for efficient and robust exploitation. Over several decades, Permanent Magnet Synchronous Motor (PMSM) is getting preferred for industrial applications over its counterpart Squirrel Cage Induction Motor (SCIM) drive, because of their higher efficiency, power density, and higher torque to inertia ratio.
In the prospective that PMSM drives are considered the drives of the future, there are still technical challenges and issues related to PMSM control. Many studies have been devoted to PMSM control in the past, but there are still some open research areas that bring worldwide researchers’ interests back to PMSM drive control. One of the approaches that may facilitate better performance, higher efficiency, and robust and reliable work of the control system is the disturbance observer-based control (DOBC) with linear and nonlinear output feedback control for PM synchronous machine applications. DOBC is adopted due to its ability to reject external and internal disturbances with improving tracking performance in the variable speed wind energy conversion system (WECS) to maximize power extraction. The high order disturbance observer (HODO) is utilized to estimate the aerodynamic torque-based wind speed without the use of a traditional anemometer, which reduces the overall cost and improves the reliability of the whole system. Also, this method has been designed to improve the angular shaft speed tracking of the PMSM system under load torque disturbance and speed variations.
The model-based linear and nonlinear feedback control are used in the proposed control systems. The sliding mode control (SMC) with switching output feedback control law and integral SMC with linear feedback and state-dependent Riccati equation (SDRE) based approaches have been designed for the systems. The SDRE control accounts for the nonlinear multivariable structure of the WECS and is approximated with Taylor series expansion terms. The chattering inherited from SMC is eliminated by the continuous approximation technique. The sliding mode is guaranteed by eliminating the reaching mode in the proposed integral SMC. The model-free cascaded linear feedback control system based on the proportional-integral (PI) controllers use a back-calculation algorithm anti-windup scheme. The proposed speed controllers are synthesized with HODO to compensate for the external disturbance, model uncertainty, noise, and modelling errors. Moreover, servomechanism-based SDRE control, a near-optimal control system is designed to suppress the model uncertainty and noise without the use of disturbance observers.
The proposed control systems for PMSM speed regulation have demonstrated a significant improvement in the angular shaft speed-tracking performance at the transients. Their performances have been tested under speed, load torque variations, and model uncertainty. For example, HODO-based SMC with switching output feedback control law (SOFCL) has demonstrated improvement by more than 78% than the PI-PI control system of the PMSM. The performance of the HODOs-based Integral SMC with SDRE nonlinear feedback is improved by 80.5% under external disturbance, model uncertainty, and noise than Integral SMC with linear feedback in the WECS. The HODO-based SDRE control with servomechanism has shown an 80.2% improvement of mean absolute percentage error under disturbances than Integral SMC with linear feedback in the WECS. The PMSM speed tracking performance of the proposed HODO-based discrete-time PI-PI control system with back-calculation algorithm anti-windup scheme is improved by 87.29% and 90.2% in the speed commands and load torque disturbance variations scenarios respectively. The simulations for testing the proposed control system of the PMSM system and WECS have been implemented in Matlab/Simulink environment. The PMSM speed control experimental results have been obtained with Lucas-Nuelle DSP-based rapid control prototyping kit.Center for International Program “Bolashak” of the Ministry of Education and Science Republic of Kazakhsta
DC-link voltage balancing and control of qZ-source inverter fed induction motor drive
Poor performance of the motor drive system is caused when the direct current-link (DC-link) capacitor voltages of the inverter are not sufficiently generated. This is mainly because of the various load torque changes and input voltage fluctuation. The qZ-source inverter operates with a fully shoot-through technique. This technique causes mismatching between the upper and lower DC-link capacitor voltages. Without capacitor voltage-balancing function, the desired DC-link capacitor voltages could not be provided or maintained when there are load and speed changes. A Sawtooth carrier-based simple boost triple-sixty-degree (TSD) pulse width modulation (PWM) technique is used to drive the qZ-source T-type inverter because this technique can give a more significant boost DC-link voltage than a traditional simple boost PWM technique. Proportional integral (PI) controller is applied for the DC-link voltage controller to achieve the fast response and less steady-state error. The simulation model was constructed for a 4 kW, 400 V, 1,400 rpm induction motor (IM) drive system used in rolling mill using MATLAB/Simulink with and without voltage balancing function. As a result, DC-link voltages of the qZ-source T-type inverter fed the induction motor drive system could be controlled using a capacitor voltage-balancing function and the output power of the motor from the simulation result is approximately equal to 4 kW
Improved Model Predictive Current Control for SPMSM Drives With Parameter Mismatch
Model predictive current control (MPCC) can predict future motor behavior according to a motor model. In practice, however, motor parameters will vary at run time, and the parameter mismatch disturbances caused by the variation in motor parameters will deteriorate the MPCC performance. To suppress the parameter mismatch disturbances effectively, this paper proposes a modified MPCC with a current variation update mechanism. In contrast with the traditional current prediction equation that contains crude model parameters, the modified current prediction equation contains only measured information, taking advantage of the proposed current variation update mechanism, which can update the modified prediction equation within each sampling period. A simulation established by MATLAB software indicates that the proposed method can effectively suppress the parameter mismatch disturbances. Experiments are carried out to verify the correctness of the proposed method
Sliding Mode Control
The main objective of this monograph is to present a broad range of well worked out, recent application studies as well as theoretical contributions in the field of sliding mode control system analysis and design. The contributions presented here include new theoretical developments as well as successful applications of variable structure controllers primarily in the field of power electronics, electric drives and motion steering systems. They enrich the current state of the art, and motivate and encourage new ideas and solutions in the sliding mode control area
- …