Progressive surface modeling scheme from unorganised curves

This paper presents a novel surface modelling scheme to construct a freeform surface progressively from unorganised curves representing the boundary and interior characteristic curves. The approach can construct a base surface model from four ordinary or composite boundary curves and support incremental surface updating from interior characteristic curves, some of which may not be on the final surface. The base surface is first constructed as a regular Coons surface and upon receiving an interior curve sketch, it is then updated. With this progressive modelling scheme, a final surface with multiple sub-surfaces can be obtained from a set of unorganised curves and transferred to commercial surface modelling software for detailed modification. The approach has been tested with examples based on 3D motion sketches; it is capable of dealing with unorganised design curves for surface modelling in conceptual design. Its limitations have been discussed

An investigation on the framework of dressing virtual humans

This thesis was submitted for the degree of Doctor of Philosophy and awarded by Brunel University.Realistic human models are widely used in variety of applications. Much research has been carried out on improving realism of virtual humans from various aspects, such as body shapes, hair, and facial expressions and so on. In most occasions, these virtual humans need to wear garments. However, it is time-consuming and tedious to dress a human model using current software packages [Maya2004]. Several methods for dressing virtual humans have been proposed recently [Bourguignon2001, Turquin2004, Turquin2007 and Wang2003B]. The method proposed by Bourguignon et al [Bourguignon2001] can only generate 3D garment contour instead of 3D surface. The method presented by Turquin et al. [Turquin2004, Turquin2007] could generate various kinds of garments from sketches but their garments followed the shape of the body and the side of a garment looked not convincing because of using simple linear interpolation. The method proposed by Wang et al. [Wang2003B] lacked interactivity from users, so users had very limited control on the garment shape.This thesis proposes a framework for dressing virtual humans to obtain convincing dressing results, which overcomes problems existing in previous papers mentioned above by using nonlinear interpolation, level set-based shape modification, feature constraints and so on. Human models used in this thesis are reconstructed from real human body data obtained using a body scanning system. Semantic information is then extracted from human models to assist in generation of 3 dimensional (3D) garments. The proposed framework allows users to dress virtual humans using garment patterns and sketches. The proposed dressing method is based on semantic virtual humans. A semantic human model is a human body with semantic information represented by certain of structure and body features. The semantic human body is reconstructed from body scanned data from a real human body. After segmenting the human model into six parts some key features are extracted. These key features are used as constraints for garment construction.Simple 3D garment patterns are generated using the techniques of sweep and offset. To dress a virtual human, users just choose a garment pattern, which is put on the human body at the default position with a default size automatically. Users are allowed to change simple parameters to specify some sizes of a garment by sketching the desired position on the human body.To enable users to dress virtual humans by their own design styles in an intuitive way, this thesis proposes an approach for garment generation from user-drawn sketches. Users can directly draw sketches around reconstructed human bodies and then generates 3D garments based on user-drawn strokes. Some techniques for generating 3D garments and dressing virtual humans are proposed. The specific focus of the research lies in generation of 3D geometric garments, garment shape modification, local shape modification, garment surface processing and decoration creation. A sketch-based interface has been developed allowing users to draw garment contour representing the front-view shape of a garment, and the system can generate a 3D geometric garment surface accordingly. To improve realism of a garment surface, this thesis presents three methods as follows. Firstly, the procedure of garment vertices generation takes key body features as constraints. Secondly, an optimisation algorithm is carried out after generation of garment vertices to optimise positions of garment vertices. Finally, some mesh processing schemes are applied to further process the garment surface. Then, an elaborate 3D geometric garment surface can be obtained through this series of processing. Finally, this thesis proposes some modification and editing methods. The user-drawn sketches are processed into spline curves, which allow users to modify the existing garment shape by dragging the control points into desired positions. This makes it easy for users to obtain a more satisfactory garment shape compared with the existing one. Three decoration tools including a 3D pen, a brush and an embroidery tool, are provided letting users decorate the garment surface by adding some small 3D details such as brand names, symbols and so on. The prototype of the framework is developed using Microsoft Visual Studio C++,OpenGL and GPU programming

Stereoscopic Sketchpad: 3D Digital Ink

--Context-- This project looked at the development of a stereoscopic 3D environment in which a user is able to draw freely in all three dimensions. The main focus was on the storage and manipulation of the ‘digital ink’ with which the user draws. For a drawing and sketching package to be effective it must not only have an easy to use user interface, it must be able to handle all input data quickly and efficiently so that the user is able to focus fully on their drawing. --Background-- When it comes to sketching in three dimensions the majority of applications currently available rely on vector based drawing methods. This is primarily because the applications are designed to take a users two dimensional input and transform this into a three dimensional model. Having the sketch represented as vectors makes it simpler for the program to act upon its geometry and thus convert it to a model. There are a number of methods to achieve this aim including Gesture Based Modelling, Reconstruction and Blobby Inflation. Other vector based applications focus on the creation of curves allowing the user to draw within or on existing 3D models. They also allow the user to create wire frame type models. These stroke based applications bring the user closer to traditional sketching rather than the more structured modelling methods detailed. While at present the field is inundated with vector based applications mainly focused upon sketch-based modelling there are significantly less voxel based applications. The majority of these applications focus on the deformation and sculpting of voxmaps, almost the opposite of drawing and sketching, and the creation of three dimensional voxmaps from standard two dimensional pixmaps. How to actually sketch freely within a scene represented by a voxmap has rarely been explored. This comes as a surprise when so many of the standard 2D drawing programs in use today are pixel based. --Method-- As part of this project a simple three dimensional drawing program was designed and implemented using C and C++. This tool is known as Sketch3D and was created using a Model View Controller (MVC) architecture. Due to the modular nature of Sketch3Ds system architecture it is possible to plug a range of different data structures into the program to represent the ink in a variety of ways. A series of data structures have been implemented and were tested for efficiency. These structures were a simple list, a 3D array, and an octree. They have been tested for: the time it takes to insert or remove points from the structure; how easy it is to manipulate points once they are stored; and also how the number of points stored effects the draw and rendering times. One of the key issues brought up by this project was devising a means by which a user is able to draw in three dimensions while using only two dimensional input devices. The method settled upon and implemented involves using the mouse or a digital pen to sketch as one would in a standard 2D drawing package but also linking the up and down keyboard keys to the current depth. This allows the user to move in and out of the scene as they draw. A couple of user interface tools were also developed to assist the user. A 3D cursor was implemented and also a toggle, which when on, highlights all of the points intersecting the depth plane on which the cursor currently resides. These tools allow the user to see exactly where they are drawing in relation to previously drawn lines. --Results-- The tests conducted on the data structures clearly revealed that the octree was the most effective data structure. While not the most efficient in every area, it manages to avoid the major pitfalls of the other structures. The list was extremely quick to render and draw to the screen but suffered severely when it comes to finding and manipulating points already stored. In contrast the three dimensional array was able to erase or manipulate points effectively while the draw time rendered the structure effectively useless, taking huge amounts of time to draw each frame. The focus of this research was on how a 3D sketching package would go about storing and accessing the digital ink. This is just a basis for further research in this area and many issues touched upon in this paper will require a more in depth analysis. The primary area of this future research would be the creation of an effective user interface and the introduction of regular sketching package features such as the saving and loading of images

Integration between Creativity and Engineering in Industrial Design

The objective of the paper is to illustrate which are the key issues today in the industrial design workflow, paying particular attention to the most creative part of the workflow, highlighting those nodes which still make hard the styling activities and giving a brief survey of the researches aimed at smoothing the transfer of the design intent along the whole design cycle and at providing tools even more adhering at the mentality of creative people. Based on the experience gained working in two different European projects, through the collaboration with industrial designers in the automotive and the household supplies fields, a general industrial design workflow will be depicted, highlighting the main differences between the automotive and non-automotive sectors; the problems still present in the design activity will be also illustrated. The paper includes short surveys, in relation to the aesthetic design, in matter of research activities aimed at - identifying the links between shape characteristics of a product and the transmitted emotions - better supporting, in a digital way, the 2D sketching phase and the automatic interpretation and transfer of the 2D sketches into a 3D surface model - improving the 3D Modeling phase