Ring-resonator-based wavelength filters

Microring resonators (MR) represent a class of filters with characteristics very similar to those of Fabry–Perot filters. However, they offer the advantage that the injected and reflected signals are separated in individual waveguides, and in addition, their design does not require any facets or gratings and is thus particularly simple. MRs evolved from the fields of fibre optic ring resonators and micron scale droplets. Their inherently small size (with typical diameters in the range between several to tens of micrometres), their filter characteristics and their potential for being used in complex and flexible configurations make these devices particularly attractive for integrated optics or VLSI photonics applications.\ud MRs for filter applications, delay lines, as add/drop multiplexers, and modulators will be covered in detail in this chapter, while other applications such as in optical sensing, in spectroscopy or for coherent light generation (MR lasers) are outside the scope of this chapter.\ud This chapter focuses primarily on 4-port microrings, while 2-port devices will play a minor role here and are covered in more detail in Chap. 9. The present chapter starts with design considerations, the functional behaviour, and key characteristics of a single microring resonator and continues with the design of cascaded MRs allowing the implementation of higher order filters. Finally, complex devices like add-drop filters, tuneable dispersion compensators, all-optical wavelength converters, and tuneable cross-connects are treated.\u

Interleavers

The chapter describes principles, analysis, design, properties, and implementations of optical frequency (or wavelength) interleavers. The emphasis is on finite impulse response devices based on cascaded Mach-Zehnder-type filter elements with carefully designed coupling ratios, the so-called resonant couplers. Another important class that is discussed is the infinite impulse response type, based on e.g. Fabry-Perot, Gires-Tournois, or ring resonators

A high efficiency input/output coupler for small silicon photonic devices

Coupling light from an optical fibre to small optical waveguides is particularly problematic in semiconductors, since the refractive index of the silica fibre is very different from that of a semiconductor waveguide. There have been several published methods of achieving such coupling, but none are sufficiently efficient whilst being robust enough for commercial applications. In this paper experimental results of our approach called a Dual-Grating Assisted Directional Coupler, are presented. The principle of coupling by this novel method has been successfully demonstrated, and a coupling efficiency of 55% measured

Flexible Polymer Planar Optical Waveguides

We report about design, fabrication and properties of flexible polymer optical planar waveguides made of Epoxy Novolak Resin as planar waveguides deposited on various foil substrates. The design of the presented planar waveguides was realized on the bases of modified dispersion equation and was schemed for 633 nm, 850 nm, 1310 nm and 1550 nm wavelength. Propagation optical loss measurements were done by the fibre probe technique at wavelegnth 633 nm (He-Ne laser) and samples have optical losses lower than 2 dB/cm. Unlike the up-to-now presented structures our constructin is fully flexible what makes it possible to be used in innovative photonics structures

Photonic integrated Mach-Zehnder interferometer with an on-chip reference arm for optical coherence tomography

Optical coherence tomography (OCT) is a noninvasive, three-dimensional imaging modality with several medical and industrial applications. Integrated photonics has the potential to enable mass production of OCT devices to significantly reduce size and cost, which can increase its use in established fields as well as enable new applications. Using silicon nitride (Si(3)N(4)) and silicon dioxide (SiO(2)) waveguides, we fabricated an integrated interferometer for spectrometer-based OCT. The integrated photonic circuit consists of four splitters and a 190 mm long reference arm with a foot-print of only 10 × 33 mm(2). It is used as the core of a spectral domain OCT system consisting of a superluminescent diode centered at 1320 nm with 100 nm bandwidth, a spectrometer with 1024 channels, and an x-y scanner. The sensitivity of the system was measured at 0.25 mm depth to be 65 dB with 0.1 mW on the sample. Using the system, we imaged human skin in vivo. With further optimization in design and fabrication technology, Si(3)N(4)/SiO(2) waveguides have a potential to serve as a platform for passive photonic integrated circuits for OCT

Monolithic integration of erbium-doped amplifiers with silicon-on-insulator waveguides

Monolithic integration of Al2O3:Er3+ amplifier technology with passive silicon-on-insulator waveguides is demonstrated. A signal enhancement of >7 dB at 1533 nm wavelength is obtained. The straightforward wafer-scale fabrication process, which includes reactive co-sputtering and subsequent reactive ion etching, allows for parallel integration of multiple amplifier and laser sections with silicon or other photonic circuits on a chip

Effective index approximations of photonic crystal slabs: a 2-to-1-D assessment

The optical properties of slab-like photonic crystals are often discussed on the basis of effective index (EI) approximations, where a 2-D effective refractive index profile replaces the actual 3-D structure. Our aim is to assess this approximation by analogous steps that reduce finite 2-D waveguide Bragg-gratings (to be seen as sections through 3-D PC slabs and membranes) to 1-D problems, which are tractable by common transfer matrix methods. Application of the EI method is disputable in particular in cases where locally no guided modes are supported, as in the holes of a PC membrane. A variational procedure permits to derive suitable effective permittivities even in these cases. Depending on the structural properties, these values can well turn out to be lower than one, or even be negative. Both the “standard” and the variational procedures are compared with reference data, generated by a rigorous 2-D Helmholtz solver, for a series of example structures.\u

Design of the Novel Wavelength Triplexer Using Multiple Polymer Microring Resonators

We report about new design of wavelength triplexer using multiple polymer optical microring resonators. Triplexer consists of two downstream wavelength channels operating at 1490 ± 10 nm, 1555 ± 10 nm and one upstream wavelength channel operating at 1310 ± 50 nm. The parallel coupled double ring resonator was used for separation of the optical signal band at 1555 nm and filtered out signal bands 1310 nm and 1490 nm. The serially coupled triple optical microring resonator was used for separation of the optical signal band at 1490 nm and filtered out signal bands 1310 nm and 1555 nm. The design was done by using FullWAVETM software by the finite-difference time-domain method. Simulation showed that optical losses for band at 1555 nm were -3 dB and crosstalk between signal bands 1555 nm and 1490 nm was 24 dB. Calculated optical losses for channel 1490 nm were less than -2.5 dB and signal bands at 1555 nm was filtered out with less than 18 dB loss. The bands at 1310 nm were fully filtered out from both downstream wavelength channels operating at bands 1490 nm and 1555 nm