Potential merits for space robotics from novel concepts of actuation for soft robotics

Autonomous robots in dynamic and unstructured environments require high performance, energy efficient and reliable actuators. In this paper we give an overview of the first results of two lines of research regarding the novel actuation principle we introduced: Series-Parallel Elastic Actuation (SPEA). Firstly, we introduce the SPEA concept and present first prototypes and results. Secondly, we discuss the potential of self-healing materials in robotics, and discuss the results on the first self-healing pneumatic cell and selfhealing mechanical fuse. Both concepts have the potential to improve performance, energy efficiency and reliability

Development of n-DoF Preloaded structures for impact mitigation in cobots

A core issue in collaborative robotics is that of impact mitigation, especially when collisions happen with operators. Passively compliant structures can be used as the frame of the cobot, although, usually, they are implemented by means of a single-degree-offreedom (DoF). However, n-DoF preloaded structures offer a number of advantages in terms of flexibility in designing their behavior. In this work, we propose a comprehensive framework for classifying n-DoF preloaded structures, including one-, two-, and threedimensional arrays. Furthermore, we investigate the implications of the peculiar behavior of these structures-which present sharp stiff-to-compliant transitions at designdetermined load thresholds-on impact mitigation. To this regard, an analytical n-DoF dynamic model was developed and numerically implemented. A prototype of a 10DoF structure was tested under static and impact loads, showing a very good agreement with the model. Future developments will see the application of n-DoF preloaded structures to impact-mitigation on cobots and in the field of mobile robots, as well as to the field of novel architected materials

Development and Optimisation of 3D Printed Compliant Joint Mechanisms for Hypermobile Robots

Hypermobile robots are an area of robotics that are often used as exploratory robots, but have facets that feature in other areas of the field. Hypermobile robots are robots that feature multiple body segments or modules, with joints between each. These robots are often used for exploratory purposes due to being able to maintain contact with the ground due to their flexible bodies. Wormbot was a hypermobile robot developed at the University of Leeds, which used a locomotion gait based on that of a Caenorhabditis elegans nematode worm, otherwise known as C.elegans. This movement pattern is reliant on compliance; a mechanism where the joints are slightly sprung and comply to the environment. The next iteration of Wormbot needs to be reduced in size, which would also require a new actuation and compliance system. This thesis describes the process of investigating a method of compliance to be used in the next version of Wormbot, while utilising the multi-material 3D printing capabilities available at the University. 3D printing provides quick manufacturing, allowing for fast changes to made to prototype components if required. During the process of this research, two 3D printed compliant actuation systems were produced; a pneumatic bellow and a Series Elastic Element (SEE) to be used in tandem with a servo motor. Both methods were tested to analyse their performance. The bellow was produced to utilise the capabilities of multi-material printing to strengthening suspected weak areas of the actuator. However, the performance of the bellow was unsatisfactory, failing twice in two actuation tests tests due to the device breaking. The SEE on the other hand, designed with two stiffer plates and a rubber-like spring element in the middle, initially proved to be reliable and repeatable in performance, with potential to behave linearly to a set spring constant. These results were acquired by performing rotational step response tests and fitting a spring-damper model to the results. However, issues with the plastic material were discovered when it was found to deform much more than anticipated, behaving in a similar manner to an additional spring element, complicating the model. Simulation work to explore the potential for using different spring constants of joint compliance in varying environments was also explored. This involved testing a virtual Wormbot in a range of environments while altering joint compliance. These simulations revealed that softer joints allow for favourable performance in constricting environments, while stiffer joints lend themselves more to quicker movement

Proceedings of the Conference on Production Systems and Logistics: CPSL 2022

[no abstract available