Implementing a protected zone in a reconfigurable processor for isolated execution of cryptographic algorithms

We design and realize a protected zone inside a reconfigurable and extensible embedded RISC processor for isolated execution of cryptographic algorithms. The protected zone is a collection of processor subsystems such as functional units optimized for high-speed execution of integer operations, a small amount of local memory, and general and special-purpose registers. We outline the principles for secure software implementation of cryptographic algorithms in a processor equipped with the protected zone. We also demonstrate the efficiency and effectiveness of the protected zone by implementing major cryptographic algorithms, namely RSA, elliptic curve cryptography, and AES in the protected zone. In terms of time efficiency, software implementations of these three cryptographic algorithms outperform equivalent software implementations on similar processors reported in the literature. The protected zone is designed in such a modular fashion that it can easily be integrated into any RISC processor; its area overhead is considerably moderate in the sense that it can be used in vast majority of embedded processors. The protected zone can also provide the necessary support to implement TPM functionality within the boundary of a processor

Securing Critical Infrastructures

1noL'abstract è presente nell'allegato / the abstract is in the attachmentopen677. INGEGNERIA INFORMATInoopenCarelli, Albert

Security of Electrical, Optical and Wireless On-Chip Interconnects: A Survey

The advancement of manufacturing technologies has enabled the integration of more intellectual property (IP) cores on the same system-on-chip (SoC). Scalable and high throughput on-chip communication architecture has become a vital component in today's SoCs. Diverse technologies such as electrical, wireless, optical, and hybrid are available for on-chip communication with different architectures supporting them. Security of the on-chip communication is crucial because exploiting any vulnerability would be a goldmine for an attacker. In this survey, we provide a comprehensive review of threat models, attacks, and countermeasures over diverse on-chip communication technologies as well as sophisticated architectures.Comment: 41 pages, 24 figures, 4 table

Architecting a One-to-many Traffic-Aware and Secure Millimeter-Wave Wireless Network-in-Package Interconnect for Multichip Systems

With the aggressive scaling of device geometries, the yield of complex Multi Core Single Chip(MCSC) systems with many cores will decrease due to the higher probability of manufacturing defects especially, in dies with a large area. Disintegration of large System-on-Chips(SoCs) into smaller chips called chiplets has shown to improve the yield and cost of complex systems. Therefore, platform-based computing modules such as embedded systems and micro-servers have already adopted Multi Core Multi Chip (MCMC) architectures overMCSC architectures. Due to the scaling of memory intensive parallel applications in such systems, data is more likely to be shared among various cores residing in different chips resulting in a significant increase in chip-to-chip traffic, especially one-to-many traffic. This one-to-many traffic is originated mainly to maintain cache-coherence between many cores residing in multiple chips. Besides, one-to-many traffics are also exploited by many parallel programming models, system-level synchronization mechanisms, and control signals. How-ever, state-of-the-art Network-on-Chip (NoC)-based wired interconnection architectures do not provide enough support as they handle such one-to-many traffic as multiple unicast trafficusing a multi-hop MCMC communication fabric. As a result, even a small portion of such one-to-many traffic can significantly reduce system performance as traditional NoC-basedinterconnect cannot mask the high latency and energy consumption caused by chip-to-chipwired I/Os. Moreover, with the increase in memory intensive applications and scaling of MCMC systems, traditional NoC-based wired interconnects fail to provide a scalable inter-connection solution required to support the increased cache-coherence and synchronization generated one-to-many traffic in future MCMC-based High-Performance Computing (HPC) nodes. Therefore, these computation and memory intensive MCMC systems need an energy-efficient, low latency, and scalable one-to-many (broadcast/multicast) traffic-aware interconnection infrastructure to ensure high-performance. Research in recent years has shown that Wireless Network-in-Package (WiNiP) architectures with CMOS compatible Millimeter-Wave (mm-wave) transceivers can provide a scalable, low latency, and energy-efficient interconnect solution for on and off-chip communication. In this dissertation, a one-to-many traffic-aware WiNiP interconnection architecture with a starvation-free hybrid Medium Access Control (MAC), an asymmetric topology, and a novel flow control has been proposed. The different components of the proposed architecture are individually one-to-many traffic-aware and as a system, they collaborate with each other to provide required support for one-to-many traffic communication in a MCMC environment. It has been shown that such interconnection architecture can reduce energy consumption and average packet latency by 46.96% and 47.08% respectively for MCMC systems. Despite providing performance enhancements, wireless channel, being an unguided medium, is vulnerable to various security attacks such as jamming induced Denial-of-Service (DoS), eavesdropping, and spoofing. Further, to minimize the time-to-market and design costs, modern SoCs often use Third Party IPs (3PIPs) from untrusted organizations. An adversary either at the foundry or at the 3PIP design house can introduce a malicious circuitry, to jeopardize an SoC. Such malicious circuitry is known as a Hardware Trojan (HT). An HTplanted in the WiNiP from a vulnerable design or manufacturing process can compromise a Wireless Interface (WI) to enable illegitimate transmission through the infected WI resulting in a potential DoS attack for other WIs in the MCMC system. Moreover, HTs can be used for various other malicious purposes, including battery exhaustion, functionality subversion, and information leakage. This information when leaked to a malicious external attackercan reveals important information regarding the application suites running on the system, thereby compromising the user profile. To address persistent jamming-based DoS attack in WiNiP, in this dissertation, a secure WiNiP interconnection architecture for MCMC systems has been proposed that re-uses the one-to-many traffic-aware MAC and existing Design for Testability (DFT) hardware along with Machine Learning (ML) approach. Furthermore, a novel Simulated Annealing (SA)-based routing obfuscation mechanism was also proposed toprotect against an HT-assisted novel traffic analysis attack. Simulation results show that,the ML classifiers can achieve an accuracy of 99.87% for DoS attack detection while SA-basedrouting obfuscation could reduce application detection accuracy to only 15% for HT-assistedtraffic analysis attack and hence, secure the WiNiP fabric from age-old and emerging attacks

Crypto-processeur architecture, programmation et évaluation de la sécurité

Les architectures des processeurs et coprocesseurs cryptographiques se montrent fréquemment vulnérables aux différents types d attaques ; en particulier, celles qui ciblent une révélation des clés chiffrées. Il est bien connu qu une manipulation des clés confidentielles comme des données standards par un processeur peut être considérée comme une menace. Ceci a lieu par exemple lors d un changement du code logiciel (malintentionné ou involontaire) qui peut provoquer que la clé confidentielle sorte en clair de la zone sécurisée. En conséquence, la sécurité de tout le système serait irréparablement menacée. L objectif que nous nous sommes fixé dans le travail présenté, était la recherche d architectures matérielles reconfigurables qui peuvent fournir une sécurité élevée des clés confidentielles pendant leur génération, leur enregistrement et leur échanges en implantant des modes cryptographiques de clés symétriques et des protocoles. La première partie de ce travail est destinée à introduire les connaissances de base de la cryptographie appliquée ainsi que de l électronique pour assurer une bonne compréhension des chapitres suivants. Deuxièmement, nous présentons un état de l art des menaces sur la confidentialité des clés secrètes dans le cas où ces dernières sont stockées et traitées dans un système embarqué. Pour lutter contre les menaces mentionnées, nous proposons alors de nouvelles règles au niveau du design de l architecture qui peuvent augmenter la résistance des processeurs et coprocesseurs cryptographiques contre les attaques logicielles. Ces règles prévoient une séparation des registres dédiés à l enregistrement de clés et ceux dédiés à l enregistrement de données : nous proposons de diviser le système en zones : de données, du chiffreur et des clés et à isoler ces zones les unes des autres au niveau du protocole, du système, de l architecture et au niveau physique. Ensuite, nous présentons un nouveau crypto-processeur intitulé HCrypt, qui intègre ces règles de séparation et qui assure ainsi une gestion sécurisée des clés. Mises à part les instructions relatives à la gestion sécurisée de clés, quelques instructions supplémentaires sont dédiées à une réalisation simple des modes de chiffrement et des protocoles cryptographiques. Dans les chapitres suivants, nous explicitons le fait que les règles de séparation suggérées, peuvent également être étendues à l architecture d un processeur généraliste et coprocesseur. Nous proposons ainsi un crypto-coprocesseur sécurisé qui est en mesure d être utilisé en relation avec d autres processeurs généralistes. Afin de démontrer sa flexibilité, le crypto-coprocesseur est interconnecté avec les processeurs soft-cores de NIOS II, de MicroBlaze et de Cortex M1. Par la suite, la résistance du crypto-processeur par rapport aux attaques DPA est testée. Sur la base de ces analyses, l architecture du processeur HCrypt est modifiée afin de simplifier sa protection contre les attaques par canaux cachés (SCA) et les attaques par injection de fautes (FIA). Nous expliquons aussi le fait qu une réorganisation des blocs au niveau macroarchitecture du processeur HCrypt, augmente la résistance du nouveau processeur HCrypt2 par rapport aux attaques de type DPA et FIA. Nous étudions ensuite les possibilités pour pouvoir reconfigurer dynamiquement les parties sélectionnées de l architecture du processeur crypto-coprocesseur. La reconfiguration dynamique peut être très utile lorsque l algorithme de chiffrement ou ses implantations doivent être changés en raison de l apparition d une vulnérabilité Finalement, la dernière partie de ces travaux de thèse, est destinée à l exécution des tests de fonctionnalité et des optimisations stricts des deux versions du cryptoprocesseur HCryptArchitectures of cryptographic processors and coprocessors are often vulnerable to different kinds of attacks, especially those targeting the disclosure of encryption keys. It is well known that manipulating confidential keys by the processor as ordinary data can represent a threat: a change in the program code (malicious or unintentional) can cause the unencrypted confidential key to leave the security area. This way, the security of the whole system would be irrecoverably compromised. The aim of our work was to search for flexible and reconfigurable hardware architectures, which can provide high security of confidential keys during their generation, storage and exchange while implementing common symmetric key cryptographic modes and protocols. In the first part of the manuscript, we introduce the bases of applied cryptography and of reconfigurable computing that are necessary for better understanding of the work. Second, we present threats to security of confidential keys when stored and processed within an embedded system. To counteract these threats, novel design rules increasing robustness of cryptographic processors and coprocessors against software attacks are presented. The rules suggest separating registers dedicated to key storage from those dedicated to data storage: we propose to partition the system into the data, cipher and key zone and to isolate the zones from each other at protocol, system, architectural and physical levels. Next, we present a novel HCrypt crypto-processor complying with the separation rules and thus ensuring secure key management. Besides instructions dedicated to secure key management, some additional instructions are dedicated to easy realization of block cipher modes and cryptographic protocols in general. In the next part of the manuscript, we show that the proposed separation principles can be extended also to a processor-coprocessor architecture. We propose a secure crypto-coprocessor, which can be used in conjunction with any general-purpose processor. To demonstrate its flexibility, the crypto-coprocessor is interconnected with the NIOS II, MicroBlaze and Cortex M1 soft-core processors. In the following part of the work, we examine the resistance of the HCrypt cryptoprocessor to differential power analysis (DPA) attacks. Following this analysis, we modify the architecture of the HCrypt processor in order to simplify its protection against side channel attacks (SCA) and fault injection attacks (FIA). We show that by rearranging blocks of the HCrypt processor at macroarchitecture level, the new HCrypt2 processor becomes natively more robust to DPA and FIA. Next, we study possibilities of dynamically reconfiguring selected parts of the processor - crypto-coprocessor architecture. The dynamic reconfiguration feature can be very useful when the cipher algorithm or its implementation must be changed in response to appearance of some vulnerability. Finally, the last part of the manuscript is dedicated to thorough testing and optimizations of both versions of the HCrypt crypto-processor. Architectures of crypto-processors and crypto-coprocessors are often vulnerable to software attacks targeting the disclosure of encryption keys. The thesis introduces separation rules enabling crypto-processor/coprocessors to support secure key management. Separation rules are implemented on novel HCrypt crypto-processor resistant to software attacks targetting the disclosure of encryption keysST ETIENNE-Bib. électronique (422189901) / SudocSudocFranceF

Null Convention Logic applications of asynchronous design in nanotechnology and cryptographic security

This dissertation presents two Null Convention Logic (NCL) applications of asynchronous logic circuit design in nanotechnology and cryptographic security. The first application is the Asynchronous Nanowire Reconfigurable Crossbar Architecture (ANRCA); the second one is an asynchronous S-Box design for cryptographic system against Side-Channel Attacks (SCA). The following are the contributions of the first application: 1) Proposed a diode- and resistor-based ANRCA (DR-ANRCA). Three configurable logic block (CLB) structures were designed to efficiently reconfigure a given DR-PGMB as one of the 27 arbitrary NCL threshold gates. A hierarchical architecture was also proposed to implement the higher level logic that requires a large number of DR-PGMBs, such as multiple-bit NCL registers. 2) Proposed a memristor look-up-table based ANRCA (MLUT-ANRCA). An equivalent circuit simulation model has been presented in VHDL and simulated in Quartus II. Meanwhile, the comparison between these two ANRCAs have been analyzed numerically. 3) Presented the defect-tolerance and repair strategies for both DR-ANRCA and MLUT-ANRCA. The following are the contributions of the second application: 1) Designed an NCL based S-Box for Advanced Encryption Standard (AES). Functional verification has been done using Modelsim and Field-Programmable Gate Array (FPGA). 2) Implemented two different power analysis attacks on both NCL S-Box and conventional synchronous S-Box. 3) Developed a novel approach based on stochastic logics to enhance the resistance against DPA and CPA attacks. The functionality of the proposed design has been verified using an 8-bit AES S-box design. The effects of decision weight, bitstream length, and input repetition times on error rates have been also studied. Experimental results shows that the proposed approach enhances the resistance to against the CPA attack by successfully protecting the hidden key --Abstract, page iii

Security enhancements for FPGA-based MPSoCs: a boot-to-runtime protection flow for an embedded Linux-based system

International audienceNowadays, embedded systems become more and more complex: the hardware/software codesign approach is a method to create such systems in a single chip which can be based on reconfigurable technologies such as FPGAs (Field-Programmable Gate Arrays). In such systems, data exchanges are a key point as they convey critical and confidential information and data are transmitted between several hardware modules and software layers. In case of an FPGA development life cycle, OS (Operating System) / data updates as runtime communications can be done through an insecure link: attackers can use this medium to make the system misbehave (malicious injection) or retrieve bitstream-related information (eavesdropping). Recent works propose solutions to securely boot a bitstream and the associated OS while runtime transactions are not protected. This work proposes a full boot-to-runtime protection flow of an embedded Linux kernel during boot and confidentiality/integrity protection of the external memory containing the kernel and the main application code/data. This work shows that such a solution with hardware components induces an area occupancy of 10% of a xc6vlx240t Virtex-6 FPGA while having an improved throughput for Linux booting and lowlatency security for runtime protection