H2B: Heartbeat-based Secret Key Generation Using Piezo Vibration Sensors

We present Heartbeats-2-Bits (H2B), which is a system for securely pairing wearable devices by generating a shared secret key from the skin vibrations caused by heartbeat. This work is motivated by potential power saving opportunity arising from the fact that heartbeat intervals can be detected energy-efficiently using inexpensive and power-efficient piezo sensors, which obviates the need to employ complex heartbeat monitors such as Electrocardiogram or Photoplethysmogram. Indeed, our experiments show that piezo sensors can measure heartbeat intervals on many different body locations including chest, wrist, waist, neck and ankle. Unfortunately, we also discover that the heartbeat interval signal captured by piezo vibration sensors has low Signal-to-Noise Ratio (SNR) because they are not designed as precision heartbeat monitors, which becomes the key challenge for H2B. To overcome this problem, we first apply a quantile function-based quantization method to fully extract the useful entropy from the noisy piezo measurements. We then propose a novel Compressive Sensing-based reconciliation method to correct the high bit mismatch rates between the two independently generated keys caused by low SNR. We prototype H2B using off-the-shelf piezo sensors and evaluate its performance on a dataset collected from different body positions of 23 participants. Our results show that H2B has an overwhelming pairing success rate of 95.6%. We also analyze and demonstrate H2B's robustness against three types of attacks. Finally, our power measurements show that H2B is very power-efficient

Security and privacy issues in implantable medical devices: A comprehensive survey

Bioengineering is a field in expansion. New technologies are appearing to provide a more efficient treatment of diseases or human deficiencies. Implantable Medical Devices (IMDs) constitute one example, these being devices with more computing, decision making and communication capabilities. Several research works in the computer security field have identified serious security and privacy risks in IMDs that could compromise the implant and even the health of the patient who carries it. This article surveys the main security goals for the next generation of IMDs and analyzes the most relevant protection mechanisms proposed so far. On the one hand, the security proposals must have into consideration the inherent constraints of these small and implanted devices: energy, storage and computing power. On the other hand, proposed solutions must achieve an adequate balance between the safety of the patient and the security level offered, with the battery lifetime being another critical parameter in the design phase

Security and privacy services based on biosignals for implantable and wearable device

Mención Internacional en el título de doctorThe proliferation of wearable and implantable medical devices has given rise to an interest in developing security schemes suitable for these devices and the environment in which they operate. One area that has received much attention lately is the use of (human) biological signals as the basis for biometric authentication, identification and the generation of cryptographic keys. More concretely, in this dissertation we use the Electrocardiogram (ECG) to extract some fiducial points which are later used on crytographic protocols. The fiducial points are used to describe the points of interest which can be extracted from biological signals. Some examples of fiducials points of the ECG are P-wave, QRS complex,T-wave, R peaks or the RR-time-interval. In particular, we focus on the time difference between two consecutive heartbeats (R-peaks). These time intervals are referred to as Inter-Pulse Intervals (IPIs) and have been proven to contain entropy after applying some signal processing algorithms. This process is known as quantization algorithm. Theentropy that the heart signal has makes the ECG values an ideal candidate to generate tokens to be used on security protocols. Most of the proposed solutions in the literature rely on some questionable assumptions. For instance, it is commonly assumed that it possible to generate the same cryptographic token in at least two different devices that are sensing the same signal using the IPI of each cardiac signal without applying any synchronization algorithm; authors typically only measure the entropy of the LSB to determine whether the generated cryptographic values are random or not; authors usually pick the four LSBs assuming they are the best ones to create the best cryptographic tokens; the datasets used in these works are rather small and, therefore, possibly not significant enough, or; in general it is impossible to reproduce the experiments carried out by other researchers because the source code of such experiments is not usually available. In this Thesis, we overcome these weaknesses trying to systematically address most of the open research questions. That is why, in all the experiments carried out during this research we used a public database called PhysioNet which is available on Internet and stores a huge heart database named PhysioBank. This repository is constantly being up dated by medical researchers who share the sensitive information about patients and it also offers an open source software named PhysioToolkit which can be used to read and display these signals. All datasets we used contain ECG records obtained from a variety of real subjects with different heart-related pathologies as well as healthy people. The first chapter of this dissertation (Chapter 1) is entirely dedicated to present the research questions, introduce the main concepts used all along this document as well as settle down some medical and cryptographic definitions. Finally, the objectives that this dissertation tackles down are described together with the main motivations for this Thesis. In Chapter 2 we report the results of a large-scale statistical study to determine if heart signal is a good source of entropy. For this, we analyze 19 public datasets of heart signals from the Physionet repository, spanning electrocardiograms from multiple subjects sampled at different frequencies and lengths. We then apply both ENT and NIST STS standard battery of randomness tests to the extracted IPIs. The results we obtain through the analysis, clearly show that a short burst of bits derived from an ECG record may seem random, but large files derived from long ECG records should not be used for security purposes. In Chapter3, we carry out an análisis to check whether it is reasonable or not the assumption that two different sensors can generate the same cryptographic token. We systematically check if two sensors can agree on the same token without sharing any type of information. Similarly to other proposals, we include ECC algorithms like BCH to the token generation. We conclude that a fuzzy extractor (or another error correction technique) is not enough to correct the synchronization errors between the IPI values derived from two ECG signals captured via two sensors placed on different positions. We demonstrate that a pre-processing of the heart signal must be performed before the fuzzy extractor is applied. Going one step forward and, in order to generate the same token on different sensors, we propose a synchronization algorithm. To do so, we include a runtimemonitoralgorithm. Afterapplyingourproposedsolution,werun again the experiments with 19 public databases from the PhysioNet repository. The only constraint to pick those databases was that they need at least two measurements of heart signals (ECG1 and ECG2). As a conclusion, running the experiments, the same token can be dexix rived on different sensors in most of the tested databases if and only if a pre-processing of the heart signal is performed before extracting the tokens. In Chapter 4, we analyze the entropy of the tokens extracted from a heart signal according to the NISTSTS recommendation (i.e.,SP80090B Recommendation for the Entropy Sources Used for Random Bit Generation). We downloaded 19 databases from the Physionet public repository and analyze, in terms of min-entropy, more than 160,000 files. Finally, we propose other combinations for extracting tokens by taking 2, 3, 4 and 5 bits different than the usual four LSBs. Also, we demonstrate that the four LSB are not the best bits to be used in cryptographic applications. We offer other alternative combinations for two (e.g., 87), three (e.g., 638), four (e.g., 2638) and five (e.g., 23758) bits which are, in general, much better than taking the four LSBs from the entropy point of view. Finally, the last Chapter of this dissertation (Chapter 5) summarizes the main conclusions arisen from this PhD Thesis and introduces some open questions.Programa de Doctorado en Ciencia y Tecnología Informática por la Universidad Carlos III de MadridPresidente: Arturo Ribagorda Garnacho.- Secretario: Jorge Blasco Alis.- Vocal: Jesús García López de la Call

Security and privacy issues in implantable medical devices: A comprehensive survey

Bioengineering is a field in expansion. New technologies are appearing to provide a more efficient treatment of diseases or human deficiencies. Implantable Medical Devices (IMDs) constitute one example, these being devices with more computing, decision making and communication capabilities. Several research works in the computer security field have identified serious security and privacy risks in IMDs that could compromise the implant and even the health of the patient who carries it. This article surveys the main security goals for the next generation of IMDs and analyzes the most relevant protection mechanisms proposed so far. On the one hand, the security proposals must have into consideration the inherent constraints of these small and implanted devices: energy, storage and computing power. On the other hand, proposed solutions must achieve an adequate balance between the safety of the patient and the security level offered, with the battery lifetime being another critical parameter in the design phase. (C) 2015 Elsevier Inc. All rights reserved.This work was partially supported by the MINECO Grant TIN2013-46469-R (SPINY: Security and Privacy in the Internet of You)

IMDfence: Architecting a Secure Protocol for Implantable Medical Devices

Over the past decade, focus on the security and privacy aspects of implantable medical devices (IMDs) has intensified, driven by the multitude of cybersecurity vulnerabilities found in various existing devices. However, due to their strict computational, energy and physical constraints, conventional security protocols are not directly applicable to IMDs. Custom-tailored schemes have been proposed instead which, however, fail to cover the full spectrum of security features that modern IMDs and their ecosystems so critically require. In this paper we propose IMDfence, a security protocol for IMD ecosystems that provides a comprehensive yet practical security portfolio, which includes availability, non-repudiation, access control, entity authentication, remote monitoring and system scalability. The protocol also allows emergency access that results in the graceful degradation of offered services without compromising security and patient safety. The performance of the security protocol as well as its feasibility and impact on modern IMDs are extensively analyzed and evaluated. We find that IMDfence achieves the above security requirements at a mere less than 7% increase in total IMD energy consumption, and less than 14 ms and 9 kB increase in system delay and memory footprint, respectively

Survey on IoT based Cyber Security Issues and Autonomous Solutions for Implantable Medical Devices

In today’s world the technology has got boomed up to the peak. So as a measure of this technology peak we could see that the enhancement of this has raised very large. This technology booming has also impacted health care sector. In our paper we are going to discuss much on implantable medical devices and its uses which plays a major role in patient’s life. This IMD’s are going to be the life changing aspect of each and every patient. These devices are highly controlled IoT devices (i.e.) those devices are connected through internet which will help doctors to track the details of the patients remotely. On the other hand since all these devices are connected to internet, these are easily hacked by the hackers. The factors of how those devices are much vulnerable and what are all the threats that will make these devices to malfunction and lead a problem to the patients is discussed. And also this will lead the health sector to fall in their reputation. IMD’s are of many types which are in existing in the Medical industry. But we are going to consider some IMD’s as example and we have planned to make a detailed study on the problems on those devices. All these devices are vulnerable since it is connected to internet. So our aim is to completely or partially reduce the risks on those devices via communication network. We have also showcased the possible threats and vulnerabilities chances on those devices. The main scenarios of device control issues and possible solutions have been discussed in this article