8 research outputs found

    Impact of imperfect angle estimation on spatial and directional modulation

    Get PDF
    In this paper, we investigate the impact of imperfect angle estimation (IAE) on spatial and directional modulation (SDM) systems, assuming that the signal experiences line of sight (LoS) propagation. In SDM systems with IAE, the variation is analyzed in detail, when there is a mismatch between the beamforming and precise channel matrices. Based on the union bound and statistics theory, the average bit error probabilities (ABEPs) for both the legitimate user and eavesdropper are derived. In addition, the ergodic rate is also quantified with IAE. Simulation results are presented to show that the achieved theoretical ABEPs are useful in quantifying the potential performance penalty. We also show that the mismatch between the beamforming and precise channel matrices will become greater with the increase in direction measurement error (DME), which affects the detection for both the legitimate user and eavesdropper. On the other hand, due to the effect of IAE, the SDM requires more signal-to-noise ratio (SNR) gain to achieve a stable ergodic secrecy rate

    Multidimensional Index Modulation for 5G and Beyond Wireless Networks

    Get PDF
    This study examines the flexible utilization of existing IM techniques in a comprehensive manner to satisfy the challenging and diverse requirements of 5G and beyond services. After spatial modulation (SM), which transmits information bits through antenna indices, application of IM to orthogonal frequency division multiplexing (OFDM) subcarriers has opened the door for the extension of IM into different dimensions, such as radio frequency (RF) mirrors, time slots, codes, and dispersion matrices. Recent studies have introduced the concept of multidimensional IM by various combinations of one-dimensional IM techniques to provide higher spectral efficiency (SE) and better bit error rate (BER) performance at the expense of higher transmitter (Tx) and receiver (Rx) complexity. Despite the ongoing research on the design of new IM techniques and their implementation challenges, proper use of the available IM techniques to address different requirements of 5G and beyond networks is an open research area in the literature. For this reason, we first provide the dimensional-based categorization of available IM domains and review the existing IM types regarding this categorization. Then, we develop a framework that investigates the efficient utilization of these techniques and establishes a link between the IM schemes and 5G services, namely enhanced mobile broadband (eMBB), massive machine-type communications (mMTC), and ultra-reliable low-latency communication (URLLC). Additionally, this work defines key performance indicators (KPIs) to quantify the advantages and disadvantages of IM techniques in time, frequency, space, and code dimensions. Finally, future recommendations are given regarding the design of flexible IM-based communication systems for 5G and beyond wireless networks.Comment: This work has been submitted to Proceedings of the IEEE for possible publicatio

    Waveform Design for 5G and beyond Systems

    Get PDF
    5G traffic has very diverse requirements with respect to data rate, delay, and reliability. The concept of using multiple OFDM numerologies adopted in the 5G NR standard will likely meet these multiple requirements to some extent. However, the traffic is radically accruing different characteristics and requirements when compared with the initial stage of 5G, which focused mainly on high-speed multimedia data applications. For instance, applications such as vehicular communications and robotics control require a highly reliable and ultra-low delay. In addition, various emerging M2M applications have sparse traffic with a small amount of data to be delivered. The state-of-the-art OFDM technique has some limitations when addressing the aforementioned requirements at the same time. Meanwhile, numerous waveform alternatives, such as FBMC, GFDM, and UFMC, have been explored. They also have their own pros and cons due to their intrinsic waveform properties. Hence, it is the opportune moment to come up with modification/variations/combinations to the aforementioned techniques or a new waveform design for 5G systems and beyond. The aim of this Special Issue is to provide the latest research and advances in the field of waveform design for 5G systems and beyond

    Quadrature spatial modulation aided single-input multiple-output-media based modulation: application to cooperative network and golden code orthogonal super-symbol systems.

    Get PDF
    Doctoral Degree. University of KwaZulu-Natal, Durban.SIMO-MBM (single-input multiple-output media-based modulation) overcomes the limitations of SIMO (single-input multiple-output) systems by reducing the number of antennas required to achieve a high data rate and improved error performance. In this thesis, the quadrature dimension of the spatial constellation is used to improve the overall error performance of the conventional SIMO-MBM and to achieve a higher data rate by decomposing the amplitude/phase modulation (APM) symbol into real and imaginary components, similar to quadrature spatial modulation (QSM). The average bit error probability of the proposed technique is expressed using a lower bound approach and validated using the results of Monte Carlo simulation (MCS). The proposed system also investigates the effect of antenna correlation in combination with channel amplitude to select a sub-optimal mirror activation pattern. The results of MCS show a 3.5dB improvement at 10b/s/Hz with m =2 and a 7dB improvement at 12b/s/Hz with =2 over the traditional SIMO-MBM scheme. The effect of imperfect channel estimation on the proposed scheme is investigated, with a trade-off of 2dB in coding gain due to channel estimation errors. Cooperative Networking (CN) improves wireless network reliability, link quality, and spectrum efficiency by collaborating among nodes. The decode and forward relaying technique is used in this thesis to investigate the performance of QSM aided SIMO-MBM in a Cooperative Network (CN). This technique uses two source nodes that simultaneously transmit a unique message block on the same time slot to the relay node, which then decodes the received message block from both transmitting nodes before re-encoding and re-transmitting the decoded message block in the next time slot to the destinations in order to significantly improve the QSM aided SIMO-MBM’s error performance. Using network coding (NC) techniques, each Node can decode the data of the other Node. To enhance network performance, complexity, robustness, and minimize delays, data is encoded and decoded in NC; algebraic techniques are applied to the detected message to collect the various transmissions. The proposed scheme's theoretical average error probability was defined using a lower bound technique, and the results of Monte Carlo simulation (MCS) validated the result. The MCS results achieved exhibit a significant improvement of 8 dB at 6 b/s/Hz and 12 dB at 8 b/s/Hz over the conventional QSM aided SIMO-MBM scheme. The media-based modulation (MBM) technique can achieve significant throughput, increase spectrum efficiency, and improve bit-error-rate performance (BER). In this thesis, the use of MBM in single-input multiple-output systems is examined using radio frequency (RF) mirrors and Golden code (GC-SIMO). The goal is to lower the system's hardware complexity by maximizing the linear relationship between RF mirrors and spectral efficiency in MBM in order to achieve a high data rate with less hardware complexity. The GC scheme's encoder uses orthogonal pairs of the super-symbol, each transmitted via a separate RF mirror at a different time slot to achieve full rate full diversity. In the results of MCS obtained, at a BER of 10−5, the GC-SIMO-MBM exhibits a significant performance of approximately 7dB and 6.5 dB SNR gain for 4 b/s/Hz and 6 b/s/Hz, respectively, compared to GC-SIMO. The proposed scheme's derived theoretical average error probability is validated by the results of the Monte Carlo simulation

    Secrecy Enhancing Scheme for Spatial Modulation Using Antenna Selection and Artificial Noise

    No full text
    In this paper, we present a new secrecy-enhancing scheme for the spatial modulation (SM) system, by considering imperfect channel state information (CSI). In the proposed scheme, two antennas are activated at the same time. One of the activated antennas transmits information symbols along with artificial noise (AN) optimized under the imperfect CSI condition. On the other hand, the other activated antenna transmits another AN sequence. Because the AN are generated by exploiting the imperfect CSI of the legitimate channel, they can only be canceled at the legitimate receiver, while the passive eavesdropper will suffer from interference. We derive the secrecy rate of the proposed scheme in order to estimate the performance. The numerical results demonstrated in this paper verify that the proposed scheme can achieve a better secrecy rate compared to the conventional scheme at the same effective data rate
    corecore