New high performance second generation CMOS current conveyor

A new high performance second-generation CMOS current conveyor architecture is presented. It is built using a differential flipped voltage follower as its input buffer stage and a cascode current mirror as output stage. It is characterized by very low output impedance. It provides gain independent high bandwidth when used to implement a programmable gain voltage amplifier. Simulation and experimental results in AMI 0.5µm CMOS technology are provided to validate the characteristics of the design

Deriving (MO)(I)CCCII Based Second-order Sinusoidal Oscillators with Non-interactive Tuning Laws using State Variable Method

The paper discusses systematic realization of second-order sinusoidal oscillators using multiple-output second-generation current controlled conveyor (MO-CCCII) and/or its inverting equivalent, namely the multiple-output inverting second-generation current controlled conveyor (MO-ICCCII) by state variable method. State variable method is a powerful technique and has been used extensively in the past to realize active RC oscillators using a variety of active building blocks (ABB). In this work, a noninteractive relationship between the condition of oscillation (CO) and the frequency of oscillation (FO) has been chosen priori and then state variable method is applied to derive the oscillators with grounded capacitors. All the resulting oscillator circuits, eight of them, are “resistor-less”, employ grounded capacitors and do not use more than three (MO)(I)CCCIIs. PSPICE simulation results of a possible CMOS implementation of the oscillators using 0:35μm TSMC CMOS technology parameters have validated their workability

A 0.18µm CMOS DDCCII for Portable LV-LP Filters

In this paper a current mode very low voltage (LV) (1V) and low power (LP) (21 µW) differential difference second generation current conveyor (CCII) is presented. The circuit is developed by applying the current sensing technique to a fully balanced version of a differential difference amplifier (DDA) so to design a suitable LV LP integrated version of the so-called differential difference CCII (DDCCII). Post-layout results, using a 0.18µm SMIC CMOS technology, have shown good general circuit performances making the proposed circuit suitable for fully integration in battery portable systems as, for examples, fully differential Sallen-Key bandpass filter

A new differential configuration suitable for realization of high CMRR, all-pass/notch filters

#yayıncısurumuyok# ; Tam metin hakemden geçmiş kopyadır.In this paper, a new configuration suitable for realization of differential input-differential output first order, second order all-pass and notch filters with high CMRR is given. The proposed configuration uses two negative type second-generation current conveyors (CCII-), and three admittances. Two first order and one second order all-pass filters and a notch filter (tunable if current controlled conveyor CCCII is used) are extracted from the proposed configuration. Tracking error, element mismatch, sensitivity analysis, simulation and experimental results are included

Novel active function blocks and their applications in frequency filters and quadrature oscillators

Kmitočtové filtry a sinusoidní oscilátory jsou lineární elektronické obvody, které jsou používány v široké oblasti elektroniky a jsou základními stavebními bloky v analogovém zpracování signálu. V poslední dekádě pro tento účel bylo prezentováno velké množství stavebních funkčních bloků. V letech 2000 a 2006 na Ústavu telekomunikací, VUT v Brně byly definovány univerzální proudový konvejor (UCC) a univerzální napět'ový konvejor (UVC) a vyrobeny ve spolupráci s firmou AMI Semiconductor Czech, Ltd. Ovšem, stále existuje požadavek na vývoj nových aktivních prvků, které nabízejí nové výhody. Hlavní přínos práce proto spočívá v definici dalších původních aktivních stavebních bloků jako jsou differential-input buffered and transconductance amplifier (DBTA), current follower transconductance amplifier (CFTA), z-copy current-controlled current inverting transconductance amplifier (ZC-CCCITA), generalized current follower differential input transconductance amplifier (GCFDITA), voltage gain-controlled modified current-feedback operational amplifier (VGC-MCFOA), a minus-type current-controlled third-generation voltage conveyor (CC-VCIII-). Pomocí navržených aktivních stavebních bloků byly prezentovány původní zapojení fázovacích článků prvního řádu, univerzální filtry druhého řádu, ekvivalenty obvodu typu KHN, inverzní filtry, aktivní simulátory uzemněného induktoru a kvadraturní sinusoidní oscilátory pracující v proudovém, napět'ovém a smíšeném módu. Chování navržených obvodů byla ověřena simulací v prostředí SPICE a ve vybraných případech experimentálním měřením.Frequency filters and sinusoidal oscillators are linear electric circuits that are used in wide area of electronics and also are the basic building blocks in analogue signal processing. In the last decade, huge number of active building blocks (ABBs) were presented for this purpose. In 2000 and 2006, the universal current conveyor (UCC) and the universal voltage conveyor (UVC), respectively, were designed at the Department of Telecommunication, BUT, Brno, and produced in cooperation with AMI Semiconductor Czech, Ltd. There is still the need to develop new active elements that offer new advantages. The main contribution of this thesis is, therefore, the definition of other novel ABBs such as the differential-input buffered and transconductance amplifier (DBTA), the current follower transconductance amplifier (CFTA), the z-copy current-controlled current inverting transconductance amplifier (ZC-CCCITA), the generalized current follower differential input transconductance amplifier (GCFDITA), the voltage gain-controlled modified current-feedback operational amplifier (VGC-MCFOA), and the minus-type current-controlled third-generation voltage conveyor (CC-VCIII-). Using the proposed ABBs, novel structures of first-order all-pass filters, second-order universal filters, KHN-equivalent circuits, inverse filters, active grounded inductance simulators, and quadrature sinusoidal oscillators working in the current-, voltage-, or mixed-mode are presented. The behavior of the proposed circuits has been verified by SPICE simulations and in selected cases also by experimental measurements.

Minimum Configuration Insensitive Multifunctional Current-Mode Biquad Using Current Conveyors and All-Grounded Passive Components

This paper proposes a new current conveyorbased high-output impedance single-input three-output current mode filter with minimum configuration. It contains two dual output second generation current conveyors, one third generation dual output current conveyor, and four grounded resistors and capacitors. The circuit simultaneously provides low-pass, band-pass, and high-pass filtering outputs, without any passive component matching conditions and restrictions on input signals. Additionally, the proposed circuit offers following advantages: Minimum active and passive element count, high output and low input impedances, suitable for cascading identical currentmode sections, all passive elements are grounded (no virtual grounding), low natural frequency and Q-factor sensitivities. The influences of non-ideal current conveyors on the proposed circuit are researched in the last