Cross-Layer Treatment of Mobility for Mobile Ad Hoc Networks

The current era of mobile communication is passing through the days of rapidly changing technologies. Such an evolving promising technology is mobile ad hoc networks (MANETs). The communications in ad hoc networks are adversely affected by the link failures in the network layer, and by the hidden station, mobile hidden station, neighborhood capture and asymmetric radio link problems in the MAC layer. All the problems are highly affected by mobility of the stations. If the degree of mobility of any station in a route increases, the route life time decreases. That causes frequent link failures, and results packet retransmissions, additional latency and packet loss. An algorithm to include mobility in a routing protocol to reduce packet losses in a MANET is proposed in this thesis. The proposed algorithm estimates the number of packets that can traverse through the route before it breaks because of mobility. The algorithm is implemented in dynamic source routing protocol, and simulated in Network Simulator-2. The MHS problem arises if a station is hidden due to mobility. Asymmetric/unequal radio links in can occur in MANETs/VANETs for many reasons such as hardware limitations, power saving protocols, shadowing effects, dynamic spectrum managements. A MAC protocol named extended reservation Aloha (ERA) is proposed which partially solves these problems. Then, using the concept of ERA, another MAC protocol named extended sliding frame reservation Aloha (ESFRA), which addresses all the above mentioned MAC problems, is proposed in this thesis. As safety critical information dissemination in DSRC/WAVE systems requires reliability and robustness, a network-MAC cross-layer information dissemination protocol is proposed in this thesis to address those issues. Although the layered architecture is still a good candidate for any design of wireless networks, the researchers are looking for some optimizations by interaction between neighbor layers which is called cross-layer design. So I proposed a network-MAC cross-layer algorithm, cross-layer extended sliding frame reservation Aloha (CESFRA), which solves mobility related problems, confirms low and deterministic end-to-end delay, and is robust and reliable in safety critical information dissemination up to 3rd hop. Discrete time Markov chain (DTMC) and OMNeT++ are used for all the MAC layer analyses

A Framework for Quality of Service in Vehicle-to-Pedestrian Safety Communication

Vehicle-to-Everything (V2X) communication has emerged as an important mechanism to improve the safety and efficiency of road traffic. V2X communication encompasses Vehicle-to-Vehicle (V2V), Vehicle-to-Infrastructure (V2I), and Vehicle-to-Pedestrian (V2P) communication. Among these types, the V2P communication efforts continue to be in the preliminary stage and lack a rounded approach towards the development of V2P systems. V2P involves communication between vehicles and a wide variety of Vulnerable Road Users (VRUs), such as pedestrians, bicyclists, mopeds, etc. The V2X systems were originally developed only for V2V and V2I when solely the vehicle characteristics were in focus. However, effective V2P system design needs to consider the characteristics of VRUs. The differing characteristics of VRUs have given rise to many questions while adapting to the V2V communication model for the V2P system. This dissertation addresses three aspects pertaining to the development of the V2P safety system. The first aspect involves a systematic design of a V2P system using a holistic approach. This dissertation proposes a V2P design framework based on various categories of inputs that are required for the design of an effective V2P system. This framework improves the understanding of the V2P system requirements and helps make the design process more systematic. The second aspect is the network performance of the V2X network in the presence of a large number of VRUs. This dissertation proposes MC-COCO4V2P, which is an energy-efficient pedestrian clustering mechanism for network congestion mitigation. MC-COCO4V2P improves network performance by reducing the pedestrian-generated safety messages. It also improves the battery life of the pedestrian devices in the process. The third aspect involves the reliability of communication between a pair of a vehicle and a pedestrian that are on the verge of collision. This dissertation classifies such crucial communication as the one requiring the highest priority even among the exchange of critical safety messages. It proposes a mechanism enabling the surrounding nodes to reduce the communication priority temporarily. This results in preferred medium access for the pair resulting in higher Quality-of-Service (QoS) for the crucial communication.Die Kommunikation zwischen Verkehrsteilnehmern (V2X) hat sich zu einem wichtigen Mechanismus zur Verbesserung der Sicherheit und Effizienz des Straßenverkehrs entwickelt. Obwohl die V2X-Kommunikation prinzipiell die Kommunikation zwischen Fahrzeugen (V2V), zwischen Fahrzeug und Infrastruktur (V2I) sowie zwischen Fahrzeug und Fußgänger (V2P) umfasst, sind Ansätze zur V2P-Kommunikation weiterhin in einem sehr frühen Stadium und lassen einen umfassenden Ansatz für die Entwicklung von V2P-Systemen vermissen. V2P umfasst im Detail die Kommunikation zwischen Fahrzeugen und einer Vielzahl von gefährdeten Verkehrsteilnehmern (VRUs), wie beispielsweise Fußgänger, Radfahrer oder Mopeds. V2X-Systeme wurden ursprünglich nur für V2V- und V2I-Kommunikation entwickelt, wobei ausschließlich die Fahrzeugeigenschaften im Fokus standen. Ein effektives V2P-Systemdesign muss jedoch auch die Eigenschaften von VRUs berücksichtigen, die bei der Berücksichtigung der V2P-Kommunikation in einem V2X-System viele Fragen aufwerfen. Diese Dissertation befasst sich mit drei Aspekten im Zusammenhang mit der Entwicklung eines V2P-Systems. Der erste Aspekt betrifft die systematische Konzeption eines V2P-Systems nach einem ganzheitlichen Ansatz. Diese Dissertation schlägt einen V2P-Entwurfsrahmen vor, der auf verschiedenen Eingangsgrößen basiert, die für die Entwicklung eines effektiven V2P-Systems erforderlich sind. Dieser Entwurfsrahmen verbessert das Verständnis der V2P-Systemanforderungen und trägt dazu bei, den Entwurfsprozess systematischer zu gestalten. Der zweite Aspekt betrifft die Leistung des V2X-Netzes, wenn eine große Anzahl von VRUs präsent ist. Diese Dissertation schlägt hierfür MC-COCO4V2P vor, einen energieeffizienten Clustering-Mechanismus für Fußgänger zur Eindämmung der Netzüberlastung. MC-COCO4V2P verbessert die Netzleistung, indem die Anzahl der von Fußgängern generierten Sicherheitsmeldungen reduziert wird. Damit wird zudem die Batterielebensdauer der von den Fußgängern genutzten Geräte verbessert. Der dritte Aspekt betrifft die Zuverlässigkeit der Kommunikation zwischen einem Fahrzeug und einem Fußgänger, die kurz vor einem Zusammenstoß stehen. Diese Dissertation stuft eine so wichtige Kommunikation als diejenige ein, die selbst beim Austausch anderer kritischer Sicherheitsnachrichten die höchste Priorität bekommt. Es wird ein Mechanismus vorgeschlagen, der es den umgebenden Verkehrsteilnehmern ermöglicht, ihre Kommunikationspriorität vorübergehend zu verringern. Dies führt zu einem bevorzugten Medienzugriff für die durch eine Kollision gefährdeten Verkehrsteilnehmer, was zu einer höheren Dienstgüte (QoS) für deren Kommunikation führt.Pedestrians and bicyclists, also known as Vulnerable Road Users (VRUs), are one of the weakest components of Intelligent Transportation Systems from a safety perspective. However, with the advent of new communication technologies, VRU protection may no longer be dependent solely on the vehicle’s safety systems. VRUs may share their location information with the surrounding vehicles to increase awareness of their presence. Such communication among vehicles and VRUs is referred to as Vehicle-to-Pedestrian (V2P) communication. Although the V2P system may be built upon the existing Vehicle-to-Vehicle communication system, it has its own set of challenges, such as different VRU mobility characteristics, energy-constrained devices, and VRU density. Therefore, there needs to be a V2P system model which is adapted to the VRU characteristics. This dissertation tackles this challenge by proposing a framework that enables scalability, reliability, and energy efficiency for VRU communication