Effect of PAO-based γ-Fe2O3 and surfactant concentration on viscosity characteristic

This is a preliminary study on the viscosity characteristics of polyalphaolefin (PAO)- based γ-Fe2O3 under zero magnetic fields. By varying the concentration of magnetic nanoparticles (MNPs), PAO-based γ-Fe2O3 with different concentrations were synthesized by co-precipitation method. The effect of this factor on the viscosity characteristic of γ-Fe2O3 (< 30 nm) was investigated on the basic of a series of rheological measurement. The use of oleic acid (OA) as a coating agent and surfactant was also investigated by varying its concentration. The results show the concentration of MNPs and the amount of OA has obvious effect on viscosity characteristics of PAO-based γ-Fe2O3. In the case of comparison between the concentrations of MNPs, higher concentration of MNPs increased the viscosity of the PAO-based γ-Fe2O3 and exhibit nearly Newtonian behavior. The large amount of OA also exhibits the increment on viscosity characteristic of MNPs. The experimental data were compared with the Bingham and Casson model and the results revealed that the rheology of the polyalphaolefin (PAO)-based γ-Fe2O3 fitted the Casson model better

Goods and services tax (GST) on construction capital cost and housing property price

Good and Service Tax (GST) an indirect broad-based conswnpti.on tax. Following with the implementation of GST in Malaysia on 1st April 2015, it is suspected that the construction capital cost and housing property price will increase accordingly. This study is aim to review the GST effect associated on construction capital cost and it influences towards housing developer and housing property price. Additionally, this study highlights what was the developer point of view on the GST given to them and also the housing price further proposes initiatives to the housing developers. Argument of GST effect is useful for the public administrators so that to re-consider the rate of GST and also beneficial to the construction parties to account with the GST implementation. As conclusion, this study review that GST do give an impact towards the construction capital cost, housing developer and housing property price in terms of knock-on effect

Goods and services tax (GST) on construction capital cost and housing property price

Good and Service Tax (GST) an indirect broad-based conswnpti.on tax. Following with the implementation of GST in Malaysia on 1st April 2015, it is suspected that the construction capital cost and housing property price will increase accordingly. This study is aim to review the GST effect associated on construction capital cost and it influences towards housing developer and housing property price. Additionally, this study highlights what was the developer point of view on the GST given to them and also the housing price further proposes initiatives to the housing developers. Argument of GST effect is useful for the public administrators so that to re-consider the rate of GST and also beneficial to the construction parties to account with the GST implementation. As conclusion, this study review that GST do give an impact towards the construction capital cost, housing developer and housing property price in terms of knock-on effect

Review of research in feature-based design

Research in feature-based design is reviewed. Feature-based design is regarded as a key factor towards CAD/CAPP integration from a process planning point of view. From a design point of view, feature-based design offers possibilities for supporting the design process better than current CAD systems do. The evolution of feature definitions is briefly discussed. Features and their role in the design process and as representatives of design-objects and design-object knowledge are discussed. The main research issues related to feature-based design are outlined. These are: feature representation, features and tolerances, feature validation, multiple viewpoints towards features, features and standardization, and features and languages. An overview of some academic feature-based design systems is provided. Future research issues in feature-based design are outlined. The conclusion is that feature-based design is still in its infancy, and that more research is needed for a better support of the design process and better integration with manufacturing, although major advances have already been made

Intelligent systems in manufacturing: current developments and future prospects

Global competition and rapidly changing customer requirements are demanding increasing changes in manufacturing environments. Enterprises are required to constantly redesign their products and continuously reconfigure their manufacturing systems. Traditional approaches to manufacturing systems do not fully satisfy this new situation. Many authors have proposed that artificial intelligence will bring the flexibility and efficiency needed by manufacturing systems. This paper is a review of artificial intelligence techniques used in manufacturing systems. The paper first defines the components of a simplified intelligent manufacturing systems (IMS), the different Artificial Intelligence (AI) techniques to be considered and then shows how these AI techniques are used for the components of IMS

Linking design and manufacturing domains via web-based and enterprise integration technologies

The manufacturing industry faces many challenges such as reducing time-to-market and cutting costs. In order to meet these increasing demands, effective methods are need to support the early product development stages by bridging the gap of communicating early design ideas and the evaluation of manufacturing performance. This paper introduces methods of linking design and manufacturing domains using disparate technologies. The combined technologies include knowledge management supporting for product lifecycle management (PLM) systems, enterprise resource planning (ERP) systems, aggregate process planning systems, workflow management and data exchange formats. A case study has been used to demonstrate the use of these technologies, illustrated by adding manufacturing knowledge to generate alternative early process plan which are in turn used by an ERP system to obtain and optimise a rough-cut capacity plan

An overview of manufacturing knowledge sharing in the product development process

This paper provides an overview of reported research relevant to the management of manufacturing related knowledge and highlights the sharing of knowledge in the product development process. Previous research and concepts reported by international researchers and examples of the research projects carried out by the authors’ research teams will also be introduced. Publications reviewed are in the scope of information, communication and knowledge management technologies in product development and manufacturing. Some key concepts and issues in knowledge management are introduced first, as a foundation for the remainder of the review. The different approaches to knowledge management and knowledge sharing, and the different types of knowledge and key issues in the product development process are discussed. Then manufacturing knowledge and its application in the product development is reviewed. The focus is given to the discussion of the approaches to sharing manufacturing knowledge relating to the product development process and indicating the future challenges and research directions

A Design Environment for Product Knowledge Management and Data Exchange

This paper reports on a distributed design environment under development for product knowledge management and information exchange. The system is able to use the company’s existing base of knowledge and to push the manufacturing knowledge higher up into the design chain to reduce the need for costly and time consuming reworks and engineering changes. The design environment uses a knowledge based system Protégé and enables data/knowledge exchange through International Standards for Product Model Exchange (ISO STEP) and the Resource Description Framework

Development of feature recognition system for CAD/CAM integration

This paper presents a methodology for implementing the feature recognition system for achieving the Computer Aided Design/ Computer Aided Manufacturing (CAD/CAM) integration goals. The Featurebased modeling is being used to model the solid models. The features being considered in this paper is hole form feature. The input of the feature recognition system is the Standard for the Exchange of Product Model Data (STEP) files. The set of feature recognition rules is generated by using ruled based technique

Process capability modelling: a review report of feature representation methodologies

Approximately 150 technical papers on the features methodology have been carefully studied and some selected papers have been commented upon. The abstracts of the comments are documented and attached to this report. The methodologies reviewed are mainly divided into two approaches, ie. feature recognition and design by features. Papers which deal with some specific topics such as feature taxonomies, dimensions and tolerances, feature concepts, etc. are also included in the document