SDR Implementation of a Testbed for Real-Time Interference Detection with Signal Cancellation

Interference greatly affects the quality of service of wireless and satellite communications, having also a financial impact for the telecommunication operators. Therefore, as the interfering events increase due to the deployment of new services, there is an increasing demand for the detection and mitigation of interference. There are several interference detectors in the literature, evaluated by using extensive simulations. However, this paper goes one step further, designing, implementing and evaluating the performance of the developed interference detection algorithms experimentally using a software defined radio, and particularly the universal software radio peripheral platform. A realistic communication system is implemented, consisting of a transmitter, a channel emulator and a receiver. Based on this system, we implement all the appropriate communications features such as pulse shaping, synchronization and demodulation. The real-time system implementation is validated and evaluated through signal and interference detection. We observe that the interference detection threshold is critical to the functioning of the system. Several existing interference detection techniques fail in practice due to this fact. In this paper, we propose a robust and practically implementable method the selection of threshold. Finally, we present real-time experimental results for the probabilities of false alarm and detection in order to verify the accuracy of our study and reinforce our theoretical analysis

ALOHA With Collision Resolution(ALOHA-CR): Theory and Software Defined Radio Implementation

A cross-layer scheme, namely ALOHA With Collision Resolution (ALOHA-CR), is proposed for high throughput wireless communications in a cellular scenario. Transmissions occur in a time-slotted ALOHA-type fashion but with an important difference: simultaneous transmissions of two users can be successful. If more than two users transmit in the same slot the collision cannot be resolved and retransmission is required. If only one user transmits, the transmitted packet is recovered with some probability, depending on the state of the channel. If two users transmit the collision is resolved and the packets are recovered by first over-sampling the collision signal and then exploiting independent information about the two users that is contained in the signal polyphase components. The ALOHA-CR throughput is derived under the infinite backlog assumption and also under the assumption of finite backlog. The contention probability is determined under these two assumptions in order to maximize the network throughput and maintain stability. Queuing delay analysis for network users is also conducted. The performance of ALOHA-CR is demonstrated on the Wireless Open Access Research Platform (WARP) test-bed containing five software defined radio nodes. Analysis and test-bed results indicate that ALOHA-CR leads to significant increase in throughput and reduction of service delays

SDR-LoRa, an open-source, full-fledged implementation of LoRa on Software-Defined-Radios: Design and potential exploitation

In this paper, we present SDR-LoRa, an open-source, full-fledged Software Defined Radio (SDR) implementation of a LoRa transceiver. First, we conduct a thorough analysis of the LoRa physical layer (PHY) functionalities, encompassing processes such as packet modulation, demodulation, and preamble detection. Then, we leverage on this analysis to create a pioneering SDR-based LoRa PHY implementation. Accordingly, we thoroughly describe all the implementation details. Moreover, we illustrate how SDR-LoRa can help boost research on the LoRa protocol by presenting three exemplary key applications that can be built on top of our implementation, namely fine-grained localization, interference cancellation, and enhanced link reliability. To validate SDR-LoRa and its applications, we test it on two different platforms: (i) a physical setup involving USRP radios and off-the-shelf commercial devices, and (ii) the Colosseum wireless channel emulator. Our experimental findings reveal that (i) SDR-LoRa performs comparably to conventional commercial LoRa systems, and (ii) all the aforementioned applications can be successfully implemented on top of SDR-LoRa with remarkable results. The complete details of the SDR-LoRa implementation code have been publicly shared online, together with a plug-and-play Colosseum container

Non-Orthogonal Signal and System Design for Wireless Communications

The thesis presents research in non-orthogonal multi-carrier signals, in which: (i) a new signal format termed truncated orthogonal frequency division multiplexing (TOFDM) is proposed to improve data rates in wireless communication systems, such as those used in mobile/cellular systems and wireless local area networks (LANs), and (ii) a new design and experimental implementation of a real-time spectrally efficient frequency division multiplexing (SEFDM) system are reported. This research proposes a modified version of the orthogonal frequency division multiplexing (OFDM) format, obtained by truncating OFDM symbols in the time-domain. In TOFDM, subcarriers are no longer orthogonally packed in the frequency-domain as time samples are only partially transmitted, leading to improved spectral efficiency. In this work, (i) analytical expressions are derived for the newly proposed TOFDM signal, followed by (ii) interference analysis, (iii) systems design for uncoded and coded schemes, (iv) experimental implementation and (v) performance evaluation of the new proposed signal and system, with comparisons to conventional OFDM systems. Results indicate that signals can be recovered with truncated symbol transmission. Based on the TOFDM principle, a new receiving technique, termed partial symbol recovery (PSR), is designed and implemented in software de ned radio (SDR), that allows efficient operation of two users for overlapping data, in wireless communication systems operating with collisions. The PSR technique is based on recovery of collision-free partial OFDM symbols, followed by the reconstruction of complete symbols to recover progressively the frames of two users suffering collisions. The system is evaluated in a testbed of 12-nodes using SDR platforms. The thesis also proposes channel estimation and equalization technique for non-orthogonal signals in 5G scenarios, using an orthogonal demodulator and zero padding. Finally, the implementation of complete SEFDM systems in real-time is investigated and described in detail

Review of Recent Trends

This work was partially supported by the European Regional Development Fund (FEDER), through the Regional Operational Programme of Centre (CENTRO 2020) of the Portugal 2020 framework, through projects SOCA (CENTRO-01-0145-FEDER-000010) and ORCIP (CENTRO-01-0145-FEDER-022141). Fernando P. Guiomar acknowledges a fellowship from “la Caixa” Foundation (ID100010434), code LCF/BQ/PR20/11770015. Houda Harkat acknowledges the financial support of the Programmatic Financing of the CTS R&D Unit (UIDP/00066/2020).MIMO-OFDM is a key technology and a strong candidate for 5G telecommunication systems. In the literature, there is no convenient survey study that rounds up all the necessary points to be investigated concerning such systems. The current deeper review paper inspects and interprets the state of the art and addresses several research axes related to MIMO-OFDM systems. Two topics have received special attention: MIMO waveforms and MIMO-OFDM channel estimation. The existing MIMO hardware and software innovations, in addition to the MIMO-OFDM equalization techniques, are discussed concisely. In the literature, only a few authors have discussed the MIMO channel estimation and modeling problems for a variety of MIMO systems. However, to the best of our knowledge, there has been until now no review paper specifically discussing the recent works concerning channel estimation and the equalization process for MIMO-OFDM systems. Hence, the current work focuses on analyzing the recently used algorithms in the field, which could be a rich reference for researchers. Moreover, some research perspectives are identified.publishersversionpublishe

Design and Development of a Testbed Prototype for Cognitive Radio Transmission over TV White Space

Considering the ever-increasing demand and the associated high costs of wireless electromagnetic spectrum, technologies that can facilitate efficient spectrum utilization are of utmost importance. Cognitive radio (CR), in conjunction with TV White Spaces (TVWS), can be a viable solution, where unlicensed or secondary users can opportunistically use the not-currently-in-use, aka idle, TV channels registered to licensed or primary users. This thesis focuses on the design and development of a testbed prototype for real-time testing of secondary user transmission in TVWS. Once an unused TV channel has been identified, our system uses that idle channel for transmitting and receiving signals. The testbed is built on Universal Software Radio Peripheral (USRP) device powered by GNU Radio Software, Software Defined Radio (SDR) receptor, and Spectrum Analyser. The developed prototype splits a given TVWS channel into multiple small sub-channels and performs channel characterization through end-to-end transmission and reception of information carrying signals. The channel characteristics are presented through Bit Transfer Rate (BTR) and frequency spectrum results. The prototype also facilitates provisions for applying error correction coding as a mean of undertaking comparative performance testing

A Reduced Complexity Cross-correlation Interference Mitigation Technique on a Real-time Software-defined Radio GPS L1 Receiver

The U.S. global position system (GPS) is one of the existing global navigation satellite systems (GNSS) that provides position and time information for users in civil, commercial and military backgrounds. Because of its reliance on many applications nowadays, it's crucial for GNSS receivers to have robustness to intentional or unintentional interference. Because most commercial GPS receivers are not flexible, software-defined radio emerged as a promising solution for fast prototyping and research on interference mitigation algorithms. This paper provides a proposed minimum mean-squared error (MMSE) interference mitigation technique which is enhanced for computational feasibility and implemented on a real-time capable GPS L1 SDR receiver. The GPS SDR receiver SW has been optimized for real-time operation on National Instruments' LabVIEW (LV) platform in conjunction with C/C++ dynamic link libraries (DLL) for improved efficiency. Performance results of said algorithm with real signals and injected interference are discussed. The proposed SDR receiver gains in terms of BER curves for several interferers are demonstrated