4,279 research outputs found
Indoor Positioning for Monitoring Older Adults at Home: Wi-Fi and BLE Technologies in Real Scenarios
This paper presents our experience on a real case of applying an indoor localization system formonitoringolderadultsintheirownhomes. Sincethesystemisdesignedtobeusedbyrealusers, therearemanysituationsthatcannotbecontrolledbysystemdevelopersandcanbeasourceoferrors. This paper presents some of the problems that arise when real non-expert users use localization systems and discusses some strategies to deal with such situations. Two technologies were tested to provide indoor localization: Wi-Fi and Bluetooth Low Energy. The results shown in the paper suggest that the Bluetooth Low Energy based one is preferable in the proposed task
Sub-Nanosecond Time of Flight on Commercial Wi-Fi Cards
Time-of-flight, i.e., the time incurred by a signal to travel from
transmitter to receiver, is perhaps the most intuitive way to measure distances
using wireless signals. It is used in major positioning systems such as GPS,
RADAR, and SONAR. However, attempts at using time-of-flight for indoor
localization have failed to deliver acceptable accuracy due to fundamental
limitations in measuring time on Wi-Fi and other RF consumer technologies.
While the research community has developed alternatives for RF-based indoor
localization that do not require time-of-flight, those approaches have their
own limitations that hamper their use in practice. In particular, many existing
approaches need receivers with large antenna arrays while commercial Wi-Fi
nodes have two or three antennas. Other systems require fingerprinting the
environment to create signal maps. More fundamentally, none of these methods
support indoor positioning between a pair of Wi-Fi devices
without~third~party~support.
In this paper, we present a set of algorithms that measure the time-of-flight
to sub-nanosecond accuracy on commercial Wi-Fi cards. We implement these
algorithms and demonstrate a system that achieves accurate device-to-device
localization, i.e. enables a pair of Wi-Fi devices to locate each other without
any support from the infrastructure, not even the location of the access
points.Comment: 14 page
Efficient AoA-based wireless indoor localization for hospital outpatients using mobile devices
The motivation of this work is to help outpatients find their corresponding departments or clinics, thus, it needs to provide indoor positioning services with a room-level accuracy. Unlike wireless outdoor localization that is dominated by the global positioning system (GPS), wireless indoor localization is still an open issue. Many different schemes are being developed to meet the increasing demand for indoor localization services. In this paper, we investigated the AoA-based wireless indoor localization for outpatients’ wayfinding in a hospital, where Wi-Fi access points (APs) are deployed, in line, on the ceiling. The target position can be determined by a mobile device, like a smartphone, through an efficient geometric calculation with two known APs coordinates and the angles of the incident radios. All possible positions in which the target may appear have been comprehensively investigated, and the corresponding solutions were proven to be the same. Experimental results show that localization error was less than 2.5 m, about 80% of the time, which can satisfy the outpatients’ requirements for wayfinding
AoA-aware Probabilistic Indoor Location Fingerprinting using Channel State Information
With expeditious development of wireless communications, location
fingerprinting (LF) has nurtured considerable indoor location based services
(ILBSs) in the field of Internet of Things (IoT). For most pattern-matching
based LF solutions, previous works either appeal to the simple received signal
strength (RSS), which suffers from dramatic performance degradation due to
sophisticated environmental dynamics, or rely on the fine-grained physical
layer channel state information (CSI), whose intricate structure leads to an
increased computational complexity. Meanwhile, the harsh indoor environment can
also breed similar radio signatures among certain predefined reference points
(RPs), which may be randomly distributed in the area of interest, thus mightily
tampering the location mapping accuracy. To work out these dilemmas, during the
offline site survey, we first adopt autoregressive (AR) modeling entropy of CSI
amplitude as location fingerprint, which shares the structural simplicity of
RSS while reserving the most location-specific statistical channel information.
Moreover, an additional angle of arrival (AoA) fingerprint can be accurately
retrieved from CSI phase through an enhanced subspace based algorithm, which
serves to further eliminate the error-prone RP candidates. In the online phase,
by exploiting both CSI amplitude and phase information, a novel bivariate
kernel regression scheme is proposed to precisely infer the target's location.
Results from extensive indoor experiments validate the superior localization
performance of our proposed system over previous approaches
Group-In: Group Inference from Wireless Traces of Mobile Devices
This paper proposes Group-In, a wireless scanning system to detect static or
mobile people groups in indoor or outdoor environments. Group-In collects only
wireless traces from the Bluetooth-enabled mobile devices for group inference.
The key problem addressed in this work is to detect not only static groups but
also moving groups with a multi-phased approach based only noisy wireless
Received Signal Strength Indicator (RSSIs) observed by multiple wireless
scanners without localization support. We propose new centralized and
decentralized schemes to process the sparse and noisy wireless data, and
leverage graph-based clustering techniques for group detection from short-term
and long-term aspects. Group-In provides two outcomes: 1) group detection in
short time intervals such as two minutes and 2) long-term linkages such as a
month. To verify the performance, we conduct two experimental studies. One
consists of 27 controlled scenarios in the lab environments. The other is a
real-world scenario where we place Bluetooth scanners in an office environment,
and employees carry beacons for more than one month. Both the controlled and
real-world experiments result in high accuracy group detection in short time
intervals and sampling liberties in terms of the Jaccard index and pairwise
similarity coefficient.Comment: This work has been funded by the EU Horizon 2020 Programme under
Grant Agreements No. 731993 AUTOPILOT and No.871249 LOCUS projects. The
content of this paper does not reflect the official opinion of the EU.
Responsibility for the information and views expressed therein lies entirely
with the authors. Proc. of ACM/IEEE IPSN'20, 202
- …