3,915 research outputs found
High speed, precision motion strategies for lightweight structures
Research on space telerobotics is summarized. Adaptive control experiments on the Robotic Arm, Large and Flexible (RALF) were preformed and are documented, along with a joint controller design for the Small Articulated Manipulator (SAM), which is mounted on the RALF. A control algorithm is described as a robust decentralized adaptive control based on a bounded uncertainty approach. Dynamic interactions between SAM and RALF are examined. Unstability of the manipulator is studied from the perspective that the inertial forces generated could actually be used to more rapidly damp out the flexible manipulator's vibration. Currently being studied is the modeling of the constrained dynamics of flexible arms
Control of free-flying space robot manipulator systems
New control techniques for self contained, autonomous free flying space robots were developed and tested experimentally. Free flying robots are envisioned as a key element of any successful long term presence in space. These robots must be capable of performing the assembly, maintenance, and inspection, and repair tasks that currently require human extravehicular activity (EVA). A set of research projects were developed and carried out using lab models of satellite robots and a flexible manipulator. The second generation space robot models use air cushion vehicle (ACV) technology to simulate in 2-D the drag free, zero g conditions of space. The current work is divided into 5 major projects: Global Navigation and Control of a Free Floating Robot, Cooperative Manipulation from a Free Flying Robot, Multiple Robot Cooperation, Thrusterless Robotic Locomotion, and Dynamic Payload Manipulation. These projects are examined in detail
Active vibration damping of the Space Shuttle remote manipulator system
The feasibility of providing active damping augmentation of the Space Shuttle Remote Manipulator System (RMS) following normal payload handling operations is investigated. The approach used in the analysis is described, and the results for both linear and nonlinear performance analysis of candidate laws are presented, demonstrating that significant improvement in the RMS dynamic response can be achieved through active control using measured RMS tip acceleration data for feedback
Lunar Rover with Multiple Science Handling Capability
A rover design study was undertaken for exploration of the Moon. Rovers that have been
launched in the past carried a suite of science payload either onboard its body or on the
robotic arm’s end. No rover has so far been launched and tasked with “carrying and
deploying” a payload on an extraterrestrial surface. This paper describes a lunar rover
designed for deploying payload as well as carrying a suite of instruments onboard for
conventional science tasks. The main consideration during the rover design process was the
usage of existing, in-house technology for development of some rover systems. The
manipulation subsystem design was derived from the technology of Light Weight Robot, a
dexterous arm originally developed for terrestrial applications. Recent efforts have led to
definition of a mission architecture for exploration of the Moon with such a rover. An outline
of its design, the manipulating arm technology and the design decisions that were made has
been presented
RUR53: an Unmanned Ground Vehicle for Navigation, Recognition and Manipulation
This paper proposes RUR53: an Unmanned Ground Vehicle able to autonomously
navigate through, identify, and reach areas of interest; and there recognize,
localize, and manipulate work tools to perform complex manipulation tasks. The
proposed contribution includes a modular software architecture where each
module solves specific sub-tasks and that can be easily enlarged to satisfy new
requirements. Included indoor and outdoor tests demonstrate the capability of
the proposed system to autonomously detect a target object (a panel) and
precisely dock in front of it while avoiding obstacles. They show it can
autonomously recognize and manipulate target work tools (i.e., wrenches and
valve stems) to accomplish complex tasks (i.e., use a wrench to rotate a valve
stem). A specific case study is described where the proposed modular
architecture lets easy switch to a semi-teleoperated mode. The paper
exhaustively describes description of both the hardware and software setup of
RUR53, its performance when tests at the 2017 Mohamed Bin Zayed International
Robotics Challenge, and the lessons we learned when participating at this
competition, where we ranked third in the Gran Challenge in collaboration with
the Czech Technical University in Prague, the University of Pennsylvania, and
the University of Lincoln (UK).Comment: This article has been accepted for publication in Advanced Robotics,
published by Taylor & Franci
Control of a flexible robot arm
Exact equations of motion of an arm with known parameters were developed and analyzed preparatory to designing control systems for robotic manipulators. The design of an experimental one-link arm for testing control designs is presented
Flight telerobot mechanism design: Problems and challenges
Problems and challenges of designing flight telerobot mechanisms are discussed. Specific experiences are drawn from the following system developments: (1) the Force Reflecting Hand Controller, (2) the Smart End Effector, (3) the force-torque sensor, and a generic multi-degrees-of-freedom manipulator
Space robotics: Recent accomplishments and opportunities for future research
The Langley Guidance, Navigation, and Control Technical Committee (GNCTC) was one of six technical committees created in 1991 by the Chief Scientist, Dr. Michael F. Card. During the kickoff meeting Dr. Card charged the chairmen to: (1) establish a cross-Center committee; (2) support at least one workshop in a selected discipline; and (3) prepare a technical paper on recent accomplishments in the discipline and on opportunities for future research. The Guidance, Navigation, and Control Committee was formed and selected for focus on the discipline of Space robotics. This report is a summary of the committee's assessment of recent accomplishments and opportunities for future research. The report is organized as follows. First is an overview of the data sources used by the committee. Next is a description of technical needs identified by the committee followed by recent accomplishments. Opportunities for future research ends the main body of the report. It includes the primary recommendation of the committee that NASA establish a national space facility for the development of space automation and robotics, one element of which is a telerobotic research platform in space. References 1 and 2 are the proceedings of two workshops sponsored by the committee during its June 1991, through May 1992 term. The focus of the committee for the June 1992 - May 1993 term will be to further define to the recommended platform in space and to add an additional discipline which includes aircraft related GN&C issues. To the latter end members performing aircraft related research will be added to the committee. (A preliminary assessment of future opportunities in aircraft-related GN&C research has been included as appendix A.
Integral Resonant Control for vibration damping and precise tip-positioning of a single-link flexible manipulator
Peer reviewedPostprin
- …