Robust Reed Solomon Coded MPSK Modulation

In this paper, construction of partitioned Reed Solomon coded modulation (RSCM), which is robust for the additive white Gaussian noise channel and a Rayleigh fading channel, is investigated. By matching configuration of component codes with the channel characteristics, it is shown that this system is robust for the Gaussian and a Rayleigh fading channel. This approach is compared with non-partitioned RSCM, a Reed Solomon code combined with an MPSK signal set using Gray mapping; and block coded MPSK modulation using binary codes, Reed Muller codes. All codes use hard decision decoding algorithm. Simulation results for these schemes show that RSCM based on set partitioning performs better than those that are not based on set partitioning and Reed Muller Coded Modulation across a wide range of conditions. The novel idea here is that in the receiver, we use a rotated 2^(m+1)-PSK detector if the transmitter uses a 2^m-PSK modulator

Modulation and coding technology for deep space and satellite applications

Modulation and coding research and development at the Jet Propulsion Laboratory (JPL) currently emphasize Deep Space Communications Systems and advanced near earth Commercial Satellite Communications Systems. The Deep Space Communication channel is extremely signal to noise ratio limited and has long transmission delay. The near earth satellite channel is bandwidth limited with fading and multipath. Recent code search efforts at JPL have found a long constraint, low rate convolutional code (15, 1/6) which, when concatenated with a ten bit Reed-Solomon (RS) code, provides a 2.1 dB gain over that of the Voyager spacecraft - the current standard. The new code is only 2 dB from the theoretical Shannon limit. A flight qualified version of the (15, 1/6) convolutional encoder was implemented on the Galileo Spacecraft to be launched later this year. An L-band mobile link, use of the Ka-band for personal communications, and the development of subsystem technology for the interconnection of satellite resources by using high rate optical inter-satellite links are noted

Performance Investigation of MIMO Based CO-OFDM FSO Communication Link for BPSK, QPSK and 16-QAM under the Influence of Reed Solomon Codes

The MIMO based CO-OFDM FSO communication system is emerging as a promising approach to meet the future bandwidth requirements for seamless communication. The atmosphere being the propagation medium is a major hindrance in wide-scale acceptability of FSO technology. For seamless and error-free transmission and reception of data, a novel concept of MIMO integrated with RS code is proposed in this paper. The system performance of an RS 64 (RS (255,127)) coded MIMO-based CO-OFDM FSO communication link was investigated using BPSK, QPSK and 16-QAM under the combined effects of geometric losses, path losses and atmospheric attenuations at a hitherto un-investigated data rate of 40 Gbps and a link distance of 5 km. The modified gamma-gamma distribution was used for modeling a moderately turbulent channel. With link length varying over a range of 1 to 5 km, error correction was maximum in 16-QAM as compared to BPSK and QPSK, with 150 to 167 corrected errors. In terms of PAPR, PSK was more apt than QAM, but with a compromise in BER. The geometric losses were reduced with link length due to an increase in error correction capability for all three modulation cases, with the least losses occurring in 16-QAM. At the target bit error rate (BER), the signal to noise ratio (SNR) required for BPSK and QPSK was higher by 3.98 dB and 6.14 dB compared to 16-QAM

Modulation/demodulation techniques for satellite communications. Part 1: Background

Basic characteristics of digital data transmission systems described include the physical communication links, the notion of bandwidth, FCC regulations, and performance measurements such as bit rates, bit error probabilities, throughputs, and delays. The error probability performance and spectral characteristics of various modulation/demodulation techniques commonly used or proposed for use in radio and satellite communication links are summarized. Forward error correction with block or convolutional codes is also discussed along with the important coding parameter, channel cutoff rate

Trade-offs in a 1 Tbps MIMO Communication System Between an Airship and an Array of Ground Receive Antennas

As demand for higher data-rate wireless communications increases, so will the interest in multiple-input and multiple-output (MIMO) systems. In a single transmitter, single receiver communication system, there is a fundamental limit to the data-rate capacity of the system proportional to the systems bandwidth. Since increasing the bandwidth is expensive and limited, another option is increasing the system\u27s capacity by adding multiple antennas at the transmitter and receiver to create a MIMO communication system. With a T transmitter, R receiver MIMO communication system, TR channels are created which allow extremely high data-rates. MIMO systems are attractive because they are extremely robust as they are able to operate when encountering channels with severe attenuation also known as deep fades. MIMO systems are known for their ability to achieve extremely high data-rates created by the multiple channels while improving bit error rate (BER) through diversity

WIMAX 802.16 PHYSICAL LAYER IMPLEMENTATION AND WIMAX COVERAGE AND PLANNING.

Over the last decade, the impact of wireless communication on the way we live and carry out business has been surpassed only by impact of the internet. But wireless communications is still in its infancy and the next stage of its development will be supplementing or replacing network infrastructure that was traditionally wired. The advent and adoption of the computer and the myriad software packages available for it offered the ability to generate a new wave of communication combining art, pictures, music and words into a targeted multimedia presentation. These presentations are large so that is requires higher bandwidth transmission facilities. Coupling this with the need for mobility, the solution would be wireless data delivery putting in consideration the bandwidth request. WiMAX technology is based on the IEEE 802.16 standard, it was only recently when the first IEEE 802.16 based equipment broadband began to enter the market. The additional spectrum, bandwidth and throughout capabilities of 802.16 will remarkably improve wireless data delivery and should allows even more wireless data service areas to be deployed economically. In this Final Year Project, a study about the IEEE 802.16 standard and mainly concentrate on the 802.16 PHY Layer behaviors was performed. A Simulink based model for the 802.16 PHY Layer was built for simulation and performance evaluation of WiMAX. MATLA

Residue number system coded differential space-time-frequency coding.

Thesis (Ph.D.)-University of KwaZulu-Natal, Durban, 2007.The rapidly growing need for fast and reliable transmission over a wireless channel motivates the development of communication systems that can support high data rates at low complexity. Achieving reliable communication over a wireless channel is a challenging task largely due to the possibility of multipaths which may lead to intersymbol interference (ISI). Diversity techniques such as time, frequency and space are commonly used to combat multipath fading. Classical diversity techniques use repetition codes such that the information is replicated and transmitted over several channels that are sufficiently spaced. In fading channels, the performance across some diversity branches may be excessively attenuated, making throughput unacceptably small. In principle, more powerful coding techniques can be used to maximize the diversity order. This leads to bandwidth expansion or increased transmission power to accommodate the redundant bits. Hence there is need for coding and modulation schemes that provide low error rate performance in a bandwidth efficient manner. If diversity schemes are combined, more independent dimensions become available for information transfer. The first part of the thesis addresses achieving temporal diversity through employing error correcting coding schemes combined with interleaving. Noncoherent differential modulation does not require explicit knowledge or estimate of the channel, instead the information is encoded in the transitions. This lends itself to the possibility of turbo-like serial concatenation of a standard outer channel encoder with an inner modulation code amenable to noncoherent detection through an interleaver. An iterative approach to joint decoding and demodulation can be realized by exchanging soft information between the decoder and the demodulator. This has been shown to be effective and hold hope for approaching capacity over fast fading channels. However most of these schemes employ low rate convolutional codes as their channel encoders. In this thesis we propose the use of redundant residue number system codes. It is shown that these codes can achieve comparable performance at minimal complexity and high data rates. The second part deals with the possibility of combining several diversity dimensions into a reliable bandwidth efficient communication scheme. Orthogonal frequency division multiplexing (OFDM) has been used to combat multipaths. Combining OFDM with multiple-input multiple-output (MIMO) systems to form MIMO-OFDM not only reduces the complexity by eliminating the need for equalization but also provides large channel capacity and a high diversity potential. Space-time coded OFDM was proposed and shown to be an effective transmission technique for MIMO systems. Spacefrequency coding and space-time-frequency coding were developed out of the need to exploit the frequency diversity due to multipaths. Most of the proposed schemes in the literature maximize frequency diversity predominantly from the frequency-selective nature of the fading channel. In this thesis we propose the use of residue number system as the frequency encoder. It is shown that the proposed space-time-frequency coding scheme can maximize the diversity gains over space, time and frequency domains. The gain of MIMO-OFDM comes at the expense of increased receiver complexity. Furthermore, most of the proposed space-time-frequency coding schemes assume frequency selective block fading channels which is not an ideal assumption for broadband wireless communications. Relatively high mobility in broadband wireless communications systems may result in high Doppler frequency, hence time-selective (rapid) fading. Rapidly changing channel characteristics impedes the channel estimation process and may result in incorrect estimates of the channel coefficients. The last part of the thesis deals with the performance of differential space-time-frequency coding in fast fading channels

Error control techniques for satellite and space communications

Two aspects of the work for NASA are examined: the construction of multi-dimensional phase modulation trellis codes and a performance analysis of these codes. A complete list is contained of all the best trellis codes for use with phase modulation. LxMPSK signal constellations are included for M = 4, 8, and 16 and L = 1, 2, 3, and 4. Spectral efficiencies range from 1 bit/channel symbol (equivalent to rate 1/2 coded QPSK) to 3.75 bits/channel symbol (equivalent to 15/16 coded 16-PSK). The parity check polynomials, rotational invariance properties, free distance, path multiplicities, and coding gains are given for all codes. These codes are considered to be the best candidates for implementation of a high speed decoder for satellite transmission. The design of a hardware decoder for one of these codes, viz., the 16-state 3x8-PSK code with free distance 4.0 and coding gain 3.75 dB is discussed. An exhaustive simulation study of the multi-dimensional phase modulation trellis codes is contained. This study was motivated by the fact that coding gains quoted for almost all codes found in literature are in fact only asymptotic coding gains, i.e., the coding gain at very high signal to noise ratios (SNRs) or very low BER. These asymptotic coding gains can be obtained directly from a knowledge of the free distance of the code. On the other hand, real coding gains at BERs in the range of 10(exp -2) to 10(exp -6), where these codes are most likely to operate in a concatenated system, must be done by simulation

Advanced Modulation and Coding Technology Conference

The objectives, approach, and status of all current LeRC-sponsored industry contracts and university grants are presented. The following topics are covered: (1) the LeRC Space Communications Program, and Advanced Modulation and Coding Projects; (2) the status of four contracts for development of proof-of-concept modems; (3) modulation and coding work done under three university grants, two small business innovation research contracts, and two demonstration model hardware development contracts; and (4) technology needs and opportunities for future missions