Design and implementation of a linear motor for multi-car elevators

The multi-car elevator system is a revolutionary new technology for high-rise buildings, promising outstanding economic benefits, but also requiring new technology for propulsion, safety and control. In this paper we report on experimental results with new components for linear motor driven multi-car elevators. We show that linear synchronous motors with optimized design and with our new safety and control system can be considered as core components of a new generation of elevator systems. The main new results concern the development of a safety system integrated into the propulsion system, the design methodology of a linear motor optimized for the multi-car elevator task, and the motion control system that is expected to be usable for extra high-rise buildings

Full-scale testing of a novel slip control braking system for heavy vehicles

This paper summarises the measured emergency braking performance of a tri-axle heavy goods vehicle semitrailer fitted with a novel pneumatic slip control braking system developed by the Cambridge Vehicle Dynamics Consortium. Straight-line braking tests were carried out from 40 km/h in order to compare a commercially electro-pneumatic available anti-lock braking system and the Cambridge Vehicle Dynamics Consortium system, which has bi-stable valves coupled with a sliding-mode slip controller. On average, the Cambridge Vehicle Dynamics Consortium system reduced the stopping distance and the air use by 15% and 22% respectively compared with those for the conventional anti-lock braking system. The most significant improvements were seen on a wet basalt-tile surface (with similar friction properties to ice) where the stopping distance and the air use were improved by 17% and 30% respectively. A third performance metric, namely the mean absolute slip error, is introduced to quantify the ability of each braking system to track a wheel slip demand. Using this metric, the bi-stable valve system is shown to improve the wheel slip demand tracking by 62% compared with that of the conventional anti-lock braking system. This improvement potentially allows more accurate control of the wheel forces during extreme manoeuvres, providing scope for the future development of advanced stability control systems. This work was supported by Haldex Brake Products Ltd, the New Zealand Tertiary Education Commission and the Cambridge Vehicle Dynamics Consortium (CVDC).This is the author accepted manuscript. The final version is available from Sage via http://dx.doi.org/10.1177/095440701560480

Modelling and Control of Switched Reluctance Machines

Today, switched reluctance machines (SRMs) play an increasingly important role in various sectors due to advantages such as robustness, simplicity of construction, low cost, insensitivity to high temperatures, and high fault tolerance. They are frequently used in fields such as aeronautics, electric and hybrid vehicles, and wind power generation. This book is a comprehensive resource on the design, modeling, and control of SRMs with methods that demonstrate their good performance as motors and generators

Modelling and Control of Switched Reluctance Machines

Today, switched reluctance machines (SRMs) play an increasingly important role in various sectors due to advantages such as robustness, simplicity of construction, low cost, insensitivity to high temperatures, and high fault tolerance. They are frequently used in fields such as aeronautics, electric and hybrid vehicles, and wind power generation. This book is a comprehensive resource on the design, modeling, and control of SRMs with methods that demonstrate their good performance as motors and generators

Comparison of Average Current Controlled PFC SEPIC and CUK Converter Feeding Current Controlled SRM

In this paper, current control of 6/4 switched reluctance motor (SRM) fed by both power factor correction (PFC) SEPIC and CUK converter is realised and asymmetric bridge converter is used to drive SRM. Furthermore, SEPIC and CUK DC-DC converters are connected in series to diode bridge rectifier in order to build PFC converters. Average current control of PFC converters is carried out by PI algorithm and both converters are operated at continuous conduction mode (CCM). Besides, switching frequency of PFC and asymmetric bridge converters is 62, 9 kHz with 5750 W power. Studies are conducted by using MATLAB/Simulink software. Total harmonic distortions (THD)s of grid current, grid power factor (PF) and output voltages of the converters are compared. Also, THDs of grid current of each converter are compared by IEEE 519-2014 standard. In addition, current waveform and flux of SRM phases are shown. It is validated by simulations that PFC CUK converter gives better result with 9.08% THD, 0.998 PF than PFC SEPIC converter having 9.61% THD and 0.997 PF. Furthermore, both converters provide the limit defined by standards

Modelling and Control of Switched Reluctance Machines

Today, switched reluctance machines (SRMs) play an increasingly important role in various sectors due to advantages such as robustness, simplicity of construction, low cost, insensitivity to high temperatures, and high fault tolerance. They are frequently used in fields such as aeronautics, electric and hybrid vehicles, and wind power generation. This book is a comprehensive resource on the design, modeling, and control of SRMs with methods that demonstrate their good performance as motors and generators

New trends in electrical vehicle powertrains

The electric vehicle and plug-in hybrid electric vehicle play a fundamental role in the forthcoming new paradigms of mobility and energy models. The electrification of the transport sector would lead to advantages in terms of energy efficiency and reduction of greenhouse gas emissions, but would also be a great opportunity for the introduction of renewable sources in the electricity sector. The chapters in this book show a diversity of current and new developments in the electrification of the transport sector seen from the electric vehicle point of view: first, the related technologies with design, control and supervision, second, the powertrain electric motor efficiency and reliability and, third, the deployment issues regarding renewable sources integration and charging facilities. This is precisely the purpose of this book, that is, to contribute to the literature about current research and development activities related to new trends in electric vehicle power trains.Peer ReviewedPostprint (author's final draft

Sliding Mode Control

The main objective of this monograph is to present a broad range of well worked out, recent application studies as well as theoretical contributions in the field of sliding mode control system analysis and design. The contributions presented here include new theoretical developments as well as successful applications of variable structure controllers primarily in the field of power electronics, electric drives and motion steering systems. They enrich the current state of the art, and motivate and encourage new ideas and solutions in the sliding mode control area

SRM drives for electric traction

"GAECE" -- PortadaDescripció del recurs: 11 maig 2020GAECE (Grup d’accionaments elèctrics amb commutació electrònica). The group of electronically commutated electrical drives is a research team of Universitat Politècnica de Catalunya (UPC BARCELONATECH), which conducts investigation in four areas: electrical drives, power electronics, mechanics and energy and sustainability. Regarding electrical drives, research focuses on the development of new reluctance, permanent magnet and hybrid electrical drives. The main goal of those electrical drives is the integration of the power converter/controller and the mechanical transmission, being specially intended for the traction of light electric vehicles. That research is carried out by using the analysis of finite elements, taking into account eco-design criteria, considering new materials and new control strategies.First editio

In-wheel motor vibration control for distributed-driven electric vehicles:A review

Efficient, safe, and comfortable electric vehicles (EVs) are essential for the creation of a sustainable transport system. Distributed-driven EVs, which often use in-wheel motors (IWMs), have many benefits with respect to size (compactness), controllability, and efficiency. However, the vibration of IWMs is a particularly important factor for both passengers and drivers, and it is therefore crucial for a successful commercialization of distributed-driven EVs. This paper provides a comprehensive literature review and state-of-the-art vibration-source-analysis and -mitigation methods in IWMs. First, selection criteria are given for IWMs, and a multidimensional comparison for several motor types is provided. The IWM vibration sources are then divided into internally-, and externally-induced vibration sources and discussed in detail. Next, vibration reduction methods, which include motor-structure optimization, motor controller, and additional control-components, are reviewed. Emerging research trends and an outlook for future improvement aims are summarized at the end of the paper. This paper can provide useful information for researchers, who are interested in the application and vibration mitigation of IWMs or similar topics