MIMO-UFMC Transceiver Schemes for Millimeter Wave Wireless Communications

The UFMC modulation is among the most considered solutions for the realization of beyond-OFDM air interfaces for future wireless networks. This paper focuses on the design and analysis of an UFMC transceiver equipped with multiple antennas and operating at millimeter wave carrier frequencies. The paper provides the full mathematical model of a MIMO-UFMC transceiver, taking into account the presence of hybrid analog/digital beamformers at both ends of the communication links. Then, several detection structures are proposed, both for the case of single-packet isolated transmission, and for the case of multiple-packet continuous transmission. In the latter situation, the paper also considers the case in which no guard time among adjacent packets is inserted, trading off an increased level of interference with higher values of spectral efficiency. At the analysis stage, the several considered detection structures and transmission schemes are compared in terms of bit-error-rate, root-mean-square-error, and system throughput. The numerical results show that the proposed transceiver algorithms are effective and that the linear MMSE data detector is capable of well managing the increased interference brought by the removal of guard times among consecutive packets, thus yielding throughput gains of about 10 - 13 $\%$. The effect of phase noise at the receiver is also numerically assessed, and it is shown that the recursive implementation of the linear MMSE exhibits some degree of robustness against this disturbance

Intersymbol and Intercarrier Interference in OFDM Transmissions through Highly Dispersive Channels

This work quantifies, for the first time, intersymbol and intercarrier interferences induced by very dispersive channels in OFDM systems. The resulting achievable data rate for \wam{suboptimal} OFDM transmissions is derived based on the computation of signal-to-interference-plus-noise ratio for arbitrary length finite duration channel impulse responses. Simulation results point to significant differences between data rates obtained via conventional formulations, for which interferences are supposed to be limited to two or three blocks, versus the data rates considering the actual channel dispersion

Sparse Filter Design Under a Quadratic Constraint: Low-Complexity Algorithms

This paper considers three problems in sparse filter design, the first involving a weighted least-squares constraint on the frequency response, the second a constraint on mean squared error in estimation, and the third a constraint on signal-to-noise ratio in detection. The three problems are unified under a single framework based on sparsity maximization under a quadratic performance constraint. Efficient and exact solutions are developed for specific cases in which the matrix in the quadratic constraint is diagonal, block-diagonal, banded, or has low condition number. For the more difficult general case, a low-complexity algorithm based on backward greedy selection is described with emphasis on its efficient implementation. Examples in wireless channel equalization and minimum-variance distortionless-response beamforming show that the backward selection algorithm yields optimally sparse designs in many instances while also highlighting the benefits of sparse design.Texas Instruments Leadership University Consortium Progra

Artificial Neural Network Based Channel Equalization

The field of digital data communications has experienced an explosive growth in the last three decade with the growth of internet technologies, high speed and efficient data transmission over communication channel has gained significant importance. The rate of data transmissions over a communication system is limited due to the effects of linear and nonlinear distortion. Linear distortions occure in from of inter-symbol interference (ISI), co-channel interference (CCI) and adjacent channel interference (ACI) in the presence of additive white Gaussian noise. Nonlinear distortions are caused due to the subsystems like amplifiers, modulator and demodulator along with nature of the medium. Some times burst noise occurs in communication system. Different equalization techniques are used to mitigate these effects. Adaptive channel equalizers are used in digital communication systems. The equalizer located at the receiver removes the effects of ISI, CCI, burst noise interference and attempts to recover the transmitted symbols. It has been seen that linear equalizers show poor performance, where as nonlinear equalizer provide superior performance. Artificial neural network based multi layer perceptron (MLP) based equalizers have been used for equalization in the last two decade. The equalizer is a feed-forward network consists of one or more hidden nodes between its input and output layers and is trained by popular error based back propagation (BP) algorithm. However this algorithm suffers from slow convergence rate, depending on the size of network. It has been seen that an optimal equalizer based on maximum a-posterior probability (MAP) criterion can be implemented using Radial basis function (RBF) network. In a RBF equalizer, centres are fixed using K-mean clustering and weights are trained using LMS algorithm. RBF equalizer can mitigate ISI interference effectively providing minimum BER plot. But when the input order is increased the number of centre of the network increases and makes the network more complicated. A RBF network, to mitigate the effects of CCI is very complex with large number of centres. To overcome computational complexity issues, a single neuron based chebyshev neural network (ChNN) and functional link ANN (FLANN) have been proposed. These neural networks are single layer network in which the original input pattern is expanded to a higher dimensional space using nonlinear functions and have capability to provide arbitrarily complex decision regions. More recently, a rank based statistics approach known as Wilcoxon learning method has been proposed for signal processing application. The Wilcoxon learning algorithm has been applied to neural networks like Wilcoxon Multilayer Perceptron Neural Network (WMLPNN), Wilcoxon Generalized Radial Basis Function Network (WGRBF). The Wilcoxon approach provides promising methodology for many machine learning problems. This motivated us to introduce these networks in the field of channel equalization application. In this thesis we have used WMLPNN and WGRBF network to mitigate ISI, CCI and burst noise interference. It is observed that the equalizers trained with Wilcoxon learning algorithm offers improved performance in terms of convergence characteristic and bit error rate performance in comparison to gradient based training for MLP and RBF. Extensive simulation studies have been carried out to validate the proposed technique. The performance of Wilcoxon networks is better then linear equalizers trained with LMS and RLS algorithm and RBF equalizer in the case of burst noise and CCI mitigations

Equalization of IM3 Products in Wideband Direct-Conversion Receivers

The wideband direct-conversion receiver architecture is proposed in this paper. In order to provide a quantitative design objective, the UMTS standard is targeted. The single-ended-to-differential conversion previously handled by an inter-stage SAW filter is now performed by a balun. The balun is followed by high-P2 MP mixers driven by Cherry-Hooper LO buffers. The MP BB filter is an active-RC 3 rd-order Chebyshev architecture that drives an 8b pipelined ADC with fs=50 MHz. The AP is a scaled-down version of the MP, with the primary difference being the inclusion of an IM3 generator. As scaling reduces the breakdown voltage of CMOS devices and as system integration trends demand the further elimination of off- chip components, there arises a great need to improve the linearity of RF receivers

Performance Assessment of Dual-Polarized 5G Waveforms and Beyond in Directly Modulated DFB-Laser using Volterra Equalizer

International audienceWe investigate the performance of 25-Gbps dual-polarized orthogonal frequency division multiplexing (OFDM)-based modulation in a directly modulated distributed feedback (DFB)-laser over 25 km of single-mode fiber. A Volterra equalizer is used to compensate for the nonlinear effects of the optical fiber. The results show that FBMC-OQAM modulation outperforms OFDM, universal filtered multicarrier (UFMC), and generalized frequency division multiplexing (GFDM) waveforms. Indeed, a target bit error rate of similar to 3.8 x 10(-3) [forward error correction (FEC) limit] for FBMC, UFMC, OFDM, and GFDM can be achieved at -30.5, -26, -16, and -14.9 dBm, respectively. The effect of the DFB laser is also investigated for UFMC, OFDM, and GFDM, and they undergo a Q penalty of 2.44, 2.77, and 4.14 dB, respectively, at their FEC limit points. For FBMC-OQAM, the signal is perfectly recovered when excluding the DFB laser at -30.5 dBm. (C) 2020 Society of Photo-Optical Instrumentation Engineers (SPIE

On the eigenfilter design method and its applications: a tutorial

The eigenfilter method for digital filter design involves the computation of filter coefficients as the eigenvector of an appropriate Hermitian matrix. Because of its low complexity as compared to other methods as well as its ability to incorporate various time and frequency-domain constraints easily, the eigenfilter method has been found to be very useful. In this paper, we present a review of the eigenfilter design method for a wide variety of filters, including linear-phase finite impulse response (FIR) filters, nonlinear-phase FIR filters, all-pass infinite impulse response (IIR) filters, arbitrary response IIR filters, and multidimensional filters. Also, we focus on applications of the eigenfilter method in multistage filter design, spectral/spacial beamforming, and in the design of channel-shortening equalizers for communications applications