Near-Memory Address Translation

Memory and logic integration on the same chip is becoming increasingly cost effective, creating the opportunity to offload data-intensive functionality to processing units placed inside memory chips. The introduction of memory-side processing units (MPUs) into conventional systems faces virtual memory as the first big showstopper: without efficient hardware support for address translation MPUs have highly limited applicability. Unfortunately, conventional translation mechanisms fall short of providing fast translations as contemporary memories exceed the reach of TLBs, making expensive page walks common. In this paper, we are the first to show that the historically important flexibility to map any virtual page to any page frame is unnecessary in today's servers. We find that while limiting the associativity of the virtual-to-physical mapping incurs no penalty, it can break the translate-then-fetch serialization if combined with careful data placement in the MPU's memory, allowing for translation and data fetch to proceed independently and in parallel. We propose the Distributed Inverted Page Table (DIPTA), a near-memory structure in which the smallest memory partition keeps the translation information for its data share, ensuring that the translation completes together with the data fetch. DIPTA completely eliminates the performance overhead of translation, achieving speedups of up to 3.81x and 2.13x over conventional translation using 4KB and 1GB pages respectively.Comment: 15 pages, 9 figure

Analytical Evaluation of Energy and Throughput for Multilevel Caches

With the increase of processor-memory performance gap, it has become important to gauge the performance of cache architectures so as to evaluate their impact on energy requirement and throughput of the system. Multilevel caches are found to be increasingly prevalent in the high-end processors. Additionally, the recent drive towards multicore systems has necessitated the use of multilevel cache hierarchies for shared memory architectures. This paper presents simplified and accurate mathematical models to estimate the energy consumption and the impact on throughput for multilevel caches for single core systems

Performance analysis and optimization of automatic speech recognition

© 2018 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works.Fast and accurate Automatic Speech Recognition (ASR) is emerging as a key application for mobile devices. Delivering ASR on such devices is challenging due to the compute-intensive nature of the problem and the power constraints of embedded systems. In this paper, we provide a performance and energy characterization of Pocketsphinx, a popular toolset for ASR that targets mobile devices. We identify the computation of the Gaussian Mixture Model (GMM) as the main bottleneck, consuming more than 80 percent of the execution time. The CPI stack analysis shows that branches and main memory accesses are the main performance limiting factors for GMM computation. We propose several software-level optimizations driven by the power/performance analysis. Unlike previous proposals that trade accuracy for performance by reducing the number of Gaussians evaluated, we maintain accuracy and improve performance by effectively using the underlying CPU microarchitecture. First, we use a refactored implementation of the innermost loop of the GMM evaluation code to ameliorate the impact of branches. Second, we exploit the vector unit available on most modern CPUs to boost GMM computation, introducing a novel memory layout for storing the means and variances of the Gaussians in order to maximize the effectiveness of vectorization. Third, we compute the Gaussians for multiple frames in parallel, so means and variances can be fetched once in the on-chip caches and reused across multiple frames, significantly reducing memory bandwidth usage. We evaluate our optimizations using both hardware counters on real CPUs and simulations. Our experimental results show that the proposed optimizations provide 2.68x speedup over the baseline Pocketsphinx decoder on a high-end Intel Skylake CPU, while achieving 61 percent energy savings. On a modern ARM Cortex-A57 mobile processor our techniques improve performance by 1.85x, while providing 59 percent energy savings without any loss in the accuracy of the ASR system.Peer ReviewedPostprint (author's final draft

Randomized Caches Can Be Pretty Useful to Hard Real-Time Systems

Cache randomization per se, and its viability for probabilistic timing analysis (PTA) of critical real-time systems, are receiving increasingly close attention from the scientific community and the industrial practitioners. In fact, the very notion of introducing randomness and probabilities in time-critical systems has caused strenuous debates owing to the apparent clash that this idea has with the strictly deterministic view traditionally held for those systems. A paper recently appeared in LITES (Reineke, J. (2014). Randomized Caches Considered Harmful in Hard Real-Time Systems. LITES, 1(1), 03:1-03:13.) provides a critical analysis of the weaknesses and risks entailed in using randomized caches in hard real-time systems. In order to provide the interested reader with a fuller, balanced appreciation of the subject matter, a critical analysis of the benefits brought about by that innovation should be provided also. This short paper addresses that need by revisiting the array of issues addressed in the cited work, in the light of the latest advances to the relevant state of the art. Accordingly, we show that the potential benefits of randomized caches do offset their limitations, causing them to be - when used in conjunction with PTA - a serious competitor to conventional designs

Revisiting LP-NUCA Energy Consumption: Cache Access Policies and Adaptive Block Dropping

Cache working-set adaptation is key as embedded systems move to multiprocessor and Simultaneous Multithreaded Architectures (SMT) because interthread pollution harms system performance and battery life. Light-Power NUCA (LP-NUCA) is a working-set adaptive cache that depends on temporal-locality to save energy. This work identifies the sources of energy waste in LP-NUCAs: parallel access to the tag and data arrays of the tiles and low locality phases with useless block migration. To counteract both issues, we prove that switching to serial access reduces energy without harming performance and propose a machine learning Adaptive Drop Rate (ADR) controller that minimizes the amount of replacement and migration when locality is low. This work demonstrates that these techniques efficiently adapt the cache drop and access policies to save energy. They reduce LP-NUCA consumption 22.7% for 1SMT. With interthread cache contention in 2SMT, the savings rise to 29%. Versus a conventional organization, energy--delay improves 20.8% and 25% for 1- and 2SMT benchmarks, and, in 65% of the 2SMT mixes, gains are larger than 20%

Sharing the instruction cache among lean cores on an asymmetric CMP for HPC applications

High performance computing (HPC) applications have parallel code sections that must scale to large numbers of cores, which makes them sensitive to serial regions. Current supercomputing systems with heterogeneous or asymmetric CMPs (ACMP) combine few high-performance big cores for serial regions, together with many low-power lean cores for throughput computing. The low requirements of HPC applications in the core front-end lead some designs, such as SMT and GPU cores, to share front-end structures including the instruction cache (I-cache). However, little work exists to analyze the benefit of sharing the I-cache among full cores, which seems compelling as a solution to reduce silicon area and power. This paper analyzes the performance, power and area impact of such a design on an ACMP with one high-performance core and multiple low-power cores. Having identified that multiple cores run the same code during parallel regions, the lean cores share the I-cache with the intent of benefiting from mutual prefetching, without increasing the average access latency. Our exploration of the multiple parameters finds the sweet spot on a wide interconnect to access the shared I-cache and the inclusion of a few line buffers to provide the required bandwidth and latency to sustain performance. The projections with McPAT and a rich set of HPC benchmarks show 11% area savings with a 5% energy reduction at no performance cost.The research was supported by European Unions 7th Framework Programme [FP7/2007-2013] under project Mont-Blanc (288777), the Ministry of Economy and Competitiveness of Spain (TIN2012-34557, TIN2015-65316-P, and BES-2013-063925), Generalitat de Catalunya (2014-SGR-1051 and 2014-SGR-1272), HiPEAC-3 Network of Excellence (ICT-287759), and finally the Severo Ochoa Program (SEV-2011-00067) of the Spanish Government.Peer ReviewedPostprint (author's final draft

Security, Performance and Energy Trade-offs of Hardware-assisted Memory Protection Mechanisms

The deployment of large-scale distributed systems, e.g., publish-subscribe platforms, that operate over sensitive data using the infrastructure of public cloud providers, is nowadays heavily hindered by the surging lack of trust toward the cloud operators. Although purely software-based solutions exist to protect the confidentiality of data and the processing itself, such as homomorphic encryption schemes, their performance is far from being practical under real-world workloads. The performance trade-offs of two novel hardware-assisted memory protection mechanisms, namely AMD SEV and Intel SGX - currently available on the market to tackle this problem, are described in this practical experience. Specifically, we implement and evaluate a publish/subscribe use-case and evaluate the impact of the memory protection mechanisms and the resulting performance. This paper reports on the experience gained while building this system, in particular when having to cope with the technical limitations imposed by SEV and SGX. Several trade-offs that provide valuable insights in terms of latency, throughput, processing time and energy requirements are exhibited by means of micro- and macro-benchmarks.Comment: European Commission Project: LEGaTO - Low Energy Toolset for Heterogeneous Computing (EC-H2020-780681

A Detailed Analysis of Contemporary ARM and x86 Architectures

RISC vs. CISC wars raged in the 1980s when chip area and processor design complexity were the primary constraints and desktops and servers exclusively dominated the computing landscape. Today, energy and power are the primary design constraints and the computing landscape is significantly different: growth in tablets and smartphones running ARM (a RISC ISA) is surpassing that of desktops and laptops running x86 (a CISC ISA). Further, the traditionally low-power ARM ISA is entering the high-performance server market, while the traditionally high-performance x86 ISA is entering the mobile low-power device market. Thus, the question of whether ISA plays an intrinsic role in performance or energy efficiency is becoming important, and we seek to answer this question through a detailed measurement based study on real hardware running real applications. We analyze measurements on the ARM Cortex-A8 and Cortex-A9 and Intel Atom and Sandybridge i7 microprocessors over workloads spanning mobile, desktop, and server computing. Our methodical investigation demonstrates the role of ISA in modern microprocessors? performance and energy efficiency. We find that ARM and x86 processors are simply engineering design points optimized for different levels of performance, and there is nothing fundamentally more energy efficient in one ISA class or the other. The ISA being RISC or CISC seems irrelevant

A Survey of Techniques for Architecting TLBs

“Translation lookaside buffer” (TLB) caches virtual to physical address translation information and is used in systems ranging from embedded devices to high-end servers. Since TLB is accessed very frequently and a TLB miss is extremely costly, prudent management of TLB is important for improving performance and energy efficiency of processors. In this paper, we present a survey of techniques for architecting and managing TLBs. We characterize the techniques across several dimensions to highlight their similarities and distinctions. We believe that this paper will be useful for chip designers, computer architects and system engineers