Architecture Independent Timing Speculation Techniques in VLSI Circuits.

Conventional digital circuits must ensure correct operation throughout a wide range of operating conditions including process, voltage, and temperature variation. These conditions have an effect on circuit delays, and safety margins must be put in place which come at a power and performance cost. The Razor system proposed eliminating these timing margins by running a circuit with occasional timing errors and correcting the errors when they occur. Several existing Razor style designs have been proposed, however prior to this work, Razor could not be applied blindly or automatically to designs, as the various error correction schemes modified the architecture of the target design. Because of the architectural invasiveness and design complexities of these techniques, no published Razor style system had been applied to a complete existing commercial processor. Additionally, in all prior Razor-style systems, there is a fundamental tradeoff between speculation window and short path, or minimum delay, constraints, limiting the technique’s effectiveness. This thesis introduces the concept of Razor using two-phase latch based timing. By identifying and utilizing time borrowing as an error correction mechanism, it allows for Razor to be applied without the need to reload data or replay instructions. This allows for Razor to be blindly and automatically applied to existing designs without detailed knowledge of internal architecture. Additionally, latch based Razor allows for large speculation windows, up to 100% of nominal circuit delay, because it breaks the connection between minimum delay constraints and speculation window. By demonstrating how to transform conventional flip-flop based designs, including those which make use of clock gating, to two-phase latch based timing, Razor can be automatically added to a large set of existing digital designs. Two forms of latch based Razor are proposed. First, Bubble Razor involves rippling stall cycles throughout a circuit in response to timing errors and is applied to the ARM Cortex-M3 processor, the first ever application of a Razor technique to a complete, existing processor design. Additional work applies Bubble Razor to the ARM Cortex-R4 processor. The second latch based Razor technique, Voltage Razor, uses voltage boosting to correct for timing errors.PHDElectrical EngineeringUniversity of Michigan, Horace H. Rackham School of Graduate Studieshttp://deepblue.lib.umich.edu/bitstream/2027.42/102461/1/mfojtik_1.pd

Fast algorithms for retiming large digital circuits

The increasing complexity of VLSI systems and shrinking time to market requirements demand good optimization tools capable of handling large circuits. Retiming is a powerful transformation that preserves functionality, and can be used to optimize sequential circuits for a wide range of objective functions by judiciously relocating the memory elements. Leiserson and Saxe, who introduced the concept, presented algorithms for period optimization (minperiod retiming) and area optimization (minarea retiming). The ASTRA algorithm proposed an alternative view of retiming using the equivalence between retiming and clock skew optimization;The first part of this thesis defines the relationship between the Leiserson-Saxe and the ASTRA approaches and utilizes it for efficient minarea retiming of large circuits. The new algorithm, Minaret, uses the same linear program formulation as the Leiserson-Saxe approach. The underlying philosophy of the ASTRA approach is incorporated to reduce the number of variables and constraints in this linear program. This allows minarea retiming of circuits with over 56,000 gates in under fifteen minutes;The movement of flip-flops in control logic changes the state encoding of finite state machines, requiring the preservation of initial (reset) states. In the next part of this work the problem of minimizing the number of flip-flops in control logic subject to a specified clock period and with the guarantee of an equivalent initial state, is formulated as a mixed integer linear program. Bounds on the retiming variables are used to guarantee an equivalent initial state in the retimed circuit. These bounds lead to a simple method for calculating an equivalent initial state for the retimed circuit;The transparent nature of level sensitive latches enables level-clocked circuits to operate faster and require less area. However, this transparency makes the operation of level-clocked circuits very complex, and optimization of level-clocked circuits is a difficult task. This thesis also presents efficient algorithms for retiming large level-clocked circuits. The relationship between retiming and clock skew optimization for level-clocked circuits is defined and utilized to develop efficient retiming algorithms for period and area optimization. Using these algorithms a circuit with 56,000 gates could be retimed for minimum period in under twenty seconds and for minimum area in under 1.5 hours

Digital ADCs and ultra-wideband RF circuits for energy constrained wireless applications by Denis Clarke Daly.

Thesis (Ph. D.)--Massachusetts Institute of Technology, Dept. of Electrical Engineering and Computer Science, 2009.Cataloged from PDF version of thesis.Includes bibliographical references (p. 173-183).Ongoing advances in semiconductor technology have enabled a multitude of portable, low power devices like cellular phones and wireless sensors. Most recently, as transistor device geometries reach the nanometer scale, transistor characteristics have changed so dramatically that many traditional circuits and architectures are no longer optimal and/or feasible. As a solution, much research has focused on developing 'highly digital' circuits and architectures that are tolerant of the increased leakage, variation and degraded voltage headrooms associated with advanced CMOS processes. This thesis presents several highly digital, mixed-signal circuits and architectures designed for energy constrained wireless applications. First, as a case study, a highly digital, voltage scalable flash ADC is presented. The flash ADC, implemented in 0.18 [mu]m CMOS, leverages redundancy and calibration to achieve robust operation at supply voltages from 0.2 V to 0.9 V. Next, the thesis expands in scope to describe a pulsed, noncoherent ultra-wideband transceiver chipset, implemented in 90 nm CMOS and operating in the 3-to-5 GHz band. The all-digital transmitter employs capacitive combining and pulse shaping in the power amplifier to meet the FCC spectral mask without any off-chip filters. The noncoherent receiver system-on-chip achieves both energy efficiency and high performance by employing simple amplifier and ADC structures combined with extensive digital calibration. Finally, the transceiver chipset is integrated in a complete system for wireless insect flight control.(cont.) Through the use of a flexible PCB and 3D die stacking, the total weight of the electronics is kept to 1 g, within the carrying capacity of an adult Manduca sexta moth. Preliminary wireless flight control of a moth in a wind tunnel is demonstrated.Ph.D

Low Power Design Techniques for Digital Logic Circuits.

With the rapid increase in the density and the size of chips and systems, area and power dissipationbecome critical concern in Very Large Scale Integrated (VLSI) circuit design. Low powerdesign techniques are essential for today's VLSI industry. The history of symbolic logic and sometypical techniques for finite state machine (FSM) logic synthesis are reviewed.The state assignment is used to optimize area and power dissipation for FSMs. Two costfunctions, targeting area and power, are presented. The Genetic Algorithm (GA) is used to searchfor a good state assignment to minimize the cost functions. The algorithm has been implementedin C. The program can produce better results than NOVA, which is integrated into SIS by DCBerkeley, and other publications both in area and power tested by MCNC benchmarks.Flip-flops are the core components of FSMs. The reduction of power dissipation from flip-flopscan save power for digital systems significantly. Three new kinds of flip-flops, called differentialCMOS single edge-triggered flip-flop with clock gating, double edge-triggered and multiple valuedflip-flops employing multiple valued clocks, are proposed. All circuits are simulated using PSpice.Most researchers have focused on developing low-power techniques in AND/OR or NAND& NOR based circuits. The low power techniques for AND /XOR based circuits are still intheir early stage of development. To implement a complex function involving many inputs,a form of decomposition into smaller subfunctions is required such that the subfunctions fitinto the primitive elements to be used in the implementation. Best polarity based XOR gatedecomposition technique has been developed, which targets low power using Huffman algorithm.Compared to the published results, the proposed method shows considerable improvement inpower dissipation. Further, Boolean functions can be expressed by Fixed Polarity Reed-Muller(FPRM) forms. Based on polarity transformation, an algorithm is developed and implementedin C language which can find the best polarity for power and area optimization. Benchmarkexamples of up to 21 inputs run on a personal computer are given

A design by example Regular Structure Generator

Originally presented as author's thesis (M.S.--Massachusetts Institute of Technology), 1985.Bibliography: leaves 108-111.Supported in part by the U.S. Air Force Office of Scientific Research contract F49620-84-C-0004Cyrus S. Bamji