Vibration isolation with smart fluid dampers: a benchmarking study

The non-linear behaviour of electrorheological (ER) and magnetorheological (MR) dampers makes it difficult to design effective control strategies, and as a consequence a wide range of control systems have been proposed in the literature. These previous studies have not always compared the performance to equivalent passive systems, alternative control designs, or idealised active systems. As a result it is often impossible to compare the performance of different smart damper control strategies. This article provides some insight into the relative performance of two MR damper control strategies: on/off control and feedback linearisation. The performance of both strategies is benchmarked against ideal passive, semi-active and fully active damping. The study relies upon a previously developed model of an MR damper, which in this work is validated experimentally under closed-loop conditions with a broadband mechanical excitation. Two vibration isolation case studies are investigated: a single-degree-of-freedom mass-isolator, and a two-degree-of-freedom system that represents a vehicle suspension system. In both cases, a variety of broadband mechanical excitations are used and the results analysed in the frequency domain. It is shown that although on/off control is more straightforward to implement, its performance is worse than the feedback linearisation strategy, and can be extremely sensitive to the excitation conditions

Hardware-in-the-loop simulation of magnetorheological dampers for vehicle suspension systems

Magnetorheological (MR) fluids provide an elegant means to enhance vibration control in primary vehicle suspensions. Such fluids can rapidly modify their flow characteristics in response to a magnetic field, so they can be used to create semi-active dampers. However, the behaviour of MR dampers is inherently non-linear and as a consequence, the choice of an effective control strategy remains an unresolved problem. Previous research has developed a method to linearize the damper's force/velocity response, to allow implementation of classical control techniques. In the present study, this strategy is used to implement skyhook damping laws within primary automotive suspensions. To simulate the vehicle suspension, a two-degree-of-freedom quarter car model is used, which is excited by realistic road profiles. The controller performance is investigated experimentally using the hardware-in-the-loop-simulation (HILS) method. This experimental method is described in detail and its performance is validated against numerical simulations for a simplified problem. The present authors demonstrate that feedback linearization can provide significant performance enhancements in terms of passenger comfort, road holding, and suspension working space compared with other control strategies. Furthermore, feedback linearization is shown to desensitize the controller to uncertainties in the input excitation such as changes in severity of the road surface roughness

Skyhook surface sliding mode control on semi-active vehicle suspension systems for ride comfort enhancement

A skyhook surface sliding mode control method was proposed and applied to the control on the semi-active vehicle suspension system for its ride comfort enhancement. A two degree of freedom dynamic model of a vehicle semi-active suspension system was given, which focused on the passenger’s ride comfort perform-ance. A simulation with the given initial conditions has been devised in MATLAB/SIMULINK. The simula-tion results were showing that there was an enhanced level of ride comfort for the vehicle semi-active sus-pension system with the skyhook surface sliding mode controller

Robust vehicle suspension system by converting active and passive control of a vehicle to semi-active control ystem analytically

This research article deals with a simplified translational model of an automotive suspension system which is constructed by considering the translation motion of one wheel of a car. Passive Vehicle Suspension System is converted into Semi Active Vehicle System. Major advantage achieved by this system is that it adjusts the damping of the suspension system without the application of any actuator by using MATLAB® simulations. The semi-active control is found to control the vibration of suspension system very well

Prototyping a new car semi-active suspension by variational feedback controller

New suspension systems electronically controlled are presented and mounted on board of a real car. The system consists of variable semi-active magneto-rheological dampers that are controlled through an electronic unit that is designed on the basis of a new optimal theoretical control, named VFC-Variational Feedback Controller. The system has been mounted on board of a BMW Series 1 car, and a set of experimental tests have been conducted in real driving conditions. The VFC reveals, because of its design strategy, to be able to enhance simultaneously both the comfort performance as well as the handling capability of the car. Preliminary comparisons with several industrially control methods adopted in the automotive field, among them skyhook and groundhook, show excellent results

Quarter car active suspension system design using optimal and robust control method

This paper offers with the theoretical and computational evaluation of optimal& robust controlproblems, with the goal of providing answers to them with MATLAB simulation.For the robust control, -synthesis controller and for the optimal control, LQR controller are designed for a quarter car active suspension system to maximize the ride comfort and road handling criteria’s of the vehicle. The proposed controllers are designed using Matlab script program using time domain analysis for the four road disturbances (bump, random sine pavement and white noise) for the control targets suspension deflection, body acceleration and body travel. Finally the simulation result proves the effectiveness of the active suspension system with -synthesis controller

Temperature sensitive controller performance of MR dampers

Magnetorheological (MR) dampers can experience large temperature changes as a result of heating caused by energy dissipation, but control systems are often designed without consideration of this fact. Furthermore, due to the highly nonlinear behavior of MR dampers, many control strategies have been proposed and it is difficult to determine which is the most effective. This paper aims to address these issues through a numerical and experimental study of an MR mass isolator subject to temperature variation. A dynamic temperature dependant model of an MR damper is first developed and validated. Control system experiments are then performed using hardware-in-the-loopsimulations. Proportional, PID, gain scheduling, and on/off control strategies are found to be equally affected by temperature variation. Using simulations incorporating the temperature dependant MR damper model, it is shown that this is largely due to a change in fluid viscosity and the associated movement of the lower clipped optimal' control bound. This zero-volts condition determines how close any controller can perform to the ideal semiactive case, thus all types of controller are affected. In terms of relative performance, proportional and PID controllers perform equally well and outperform the on/off and gain scheduling strategies. Gain scheduling methods are superior to on/off control

Comparison of H∞ and μ-synthesis Control Design for Quarter Car Active Suspension System using Simulink

To improve road dealing with and passenger consolation of a vehicle, a suspension system is supplied. An active suspension system is taken into consideration better than the passive suspension system. In this paper, an active suspension system of a linear quarter vehicle is designed, that's issue to exclusive disturbances on the road. Since the parametric uncertainty within the spring, the shock absorber and the actuator has been taken into consideration, robust control is used. H∞ and µ-Synthesis controllers of are used to improve using consolation and road dealing with potential of the vehicle, in addition to confirm the sturdy stability and overall performance of the system. In the H∞ design, we designed a driving force for passenger consolation and to preserve the deflection of the suspension small and to reduce the disturbance of the road to the deflection of the suspension. For the µ synthesis system, we designed a controller with hydraulic actuator and uncertainty model. We designed a MATLAB / SIMULINK model for the active suspension system with the H∞ and µ-synthesis controllers we tested the use of 4 road disturbance inputs (bump, random, sinusoidal pavement and slope) for deflection of the suspension, body acceleration and body travel for passive, active suspension with controller and active suspension without controller. Finally, we evaluate the H∞ and µ-synthesis controllers with a Simulink model for suspension deflection, body acceleration and body travel simulation, and the result suggests that both designs offer correct overall performance, however the H∞ controller has superior overall performance as compared to the µ-synthesis controller

An optimized tuned mass damper/harvester device

Much work has been conducted on vibration absorbers, such as tuned mass dampers (TMD), where significant energy is extracted from a structure. Traditionally, this energy is dissipated through the devices as heat. In this paper, the concept of recovering some of this energy electrically and reuse it for structural control or health monitoring is investigated. The energy-dissipating damper of a TMD is replaced with an electromagnetic device in order to transform mechanical vibration into electrical energy. That gives the possibility of controlled damping force whilst generating useful electrical energy. Both analytical and experimental results from an adaptive and a semi-active tuned mass damper/harvester are presented. The obtained results suggest that sufficient energy might be harvested for the device to tune itself to optimise vibration suppression

H2 optimal and μ-synthesis design of quarter car active suspension system

Better journey comfort and controllability of automobile are pursued via car industries with the aid of considering using suspension system which plays a very crucial function in handling and ride comfort characteristics. This paper presents the design of an active suspension of quarter automobile system using robust H2 optimal controller and robust μ - synthesis controller with a second order hydraulic actuator. Parametric uncertainties have been additionally considered to model within the system. Numerical simulation become completed to the designed controllers. Results display that during spite of introducing uncertainties, the designed μ - synthesis controller improves ride consolation and road protecting of the automobile while as compared to the H2 optimal controller