139,625 research outputs found
Measurement and reporting of climate-smart agriculture: technical guidance for a countrycentric process
Given the extent of climate-smart agriculture (CSA) initiatives at project, national, regional and global levels, there is increasing interest in tracking progress in implementing CSA at national level. CSA is also expected to contribute to higher-level goals (e.g., the Paris Agreement, Africa Unionâs Vision 25x25, and the Sustainable Development Goals [SDGs], etc.). Measurement and reporting of climate-smart agriculture (MR of CSA) provides intelligence on necessary the status, effectiveness, efficiency and impacts of interventions, which is critical for meeting stakeholdersâ diverse management and reporting needs. In this paper, we build the case for a stakeholder-driven, country-centric framework for MR of CSA, which aims to increase coordination and coherence across stakeholdersâ MR activities, while also aligning national reporting with reporting on international commitments. We present practical guidance on how to develop an integrated MR framework, drawing on findings from a multi-country assessment of needs, opportunities and capacities for national MR of CSA. The content of a unified MR framework is determined by stakeholdersâ activities (how they promote CSA), needs (why MR is useful to them) and current capacities to conduct periodic monitoring, evaluation and reporting (how ready are institutions, staff and finances). Our analysis found that explicit demand for integration of data systems and active engagement of stakeholders throughout the entire process are key ingredients for building a MR system that is relevant, useful and acted upon. Based on these lessons, we identify a seven-step framework for stakeholders to develop a comprehensive information system for MR of progress in implementing CSA
Context-aware adaptation in DySCAS
DySCAS is a dynamically self-configuring middleware for automotive control systems. The addition of autonomic, context-aware dynamic configuration to automotive control systems brings a potential for a wide range of benefits in terms of robustness, flexibility, upgrading etc. However, the automotive systems represent a particularly challenging domain for the deployment of autonomics concepts, having a combination of real-time performance constraints, severe resource limitations, safety-critical aspects and cost pressures. For these reasons current systems are statically configured. This paper describes the dynamic run-time configuration aspects of DySCAS and focuses on the extent to which context-aware adaptation has been achieved in DySCAS, and the ways in which the various design and implementation challenges are met
Context-driven progressive enhancement of mobile web applications: a multicriteria decision-making approach
Personal computing has become all about mobile and embedded devices. As a result, the adoption rate of smartphones is rapidly increasing and this trend has set a need for mobile applications to be available at anytime, anywhere and on any device. Despite the obvious advantages of such immersive mobile applications, software developers are increasingly facing the challenges related to device fragmentation. Current application development solutions are insufficiently prepared for handling the enormous variety of software platforms and hardware characteristics covering the mobile eco-system. As a result, maintaining a viable balance between development costs and market coverage has turned out to be a challenging issue when developing mobile applications. This article proposes a context-aware software platform for the development and delivery of self-adaptive mobile applications over the Web. An adaptive application composition approach is introduced, capable of autonomously bypassing context-related fragmentation issues. This goal is achieved by incorporating and validating the concept of fine-grained progressive application enhancements based on a multicriteria decision-making strategy
Recommended from our members
Models for Learning (Mod4L) Final Report: Representing Learning Designs
The Mod4L Models of Practice project is part of the JISC-funded Design for Learning Programme. It ran from 1 May â 31 December 2006. The philosophy underlying the project was that a general split is evident in the e-learning community between development of e-learning tools, services and standards, and research into how teachers can use these most effectively, and is impeding uptake of new tools and methods by teachers. To help overcome this barrier and bridge the gap, a need is felt for practitioner-focused resources which describe a range of learning designs and offer guidance on how these may be chosen and applied, how they can support effective practice in design for learning, and how they can support the development of effective tools, standards and systems with a learning design capability (see, for example, Griffiths and Blat 2005, JISC 2006). Practice models, it was suggested, were such a resource.
The aim of the project was to: develop a range of practice models that could be used by practitioners in real life contexts and have a high impact on improving teaching and learning practice.
We worked with two definitions of practice models. Practice models are:
1. generic approaches to the structuring and orchestration of learning activities. They express elements of pedagogic principle and allow practitioners to make informed choices (JISC 2006)
However, however effective a learning design may be, it can only be shared with others through a representation. The issue of representation of learning designs is, then, central to the concept of sharing and reuse at the heart of JISCâs Design for Learning programme. Thus practice models should be both representations of effective practice, and effective representations of practice. Hence we arrived at the project working definition of practice models as:
2. Common, but decontextualised, learning designs that are represented in a way that is usable by practitioners (teachers, managers, etc).(Mod4L working definition, Falconer & Littlejohn 2006).
A learning design is defined as the outcome of the process of designing, planning and orchestrating learning activities as part of a learning session or programme (JISC 2006).
Practice models have many potential uses: they describe a range of learning designs that are found to be effective, and offer guidance on their use; they support sharing, reuse and adaptation of learning designs by teachers, and also the development of tools, standards and systems for planning, editing and running the designs.
The project took a practitioner-centred approach, working in close collaboration with a focus group of 12 teachers recruited across a range of disciplines and from both FE and HE. Focus group members are listed in Appendix 1. Information was gathered from the focus group through two face to face workshops, and through their contributions to discussions on the project wiki. This was supplemented by an activity at a JISC pedagogy experts meeting in October 2006, and a part workshop at ALT-C in September 2006. The project interim report of August 2006 contained the outcomes of the first workshop (Falconer and Littlejohn, 2006).
The current report refines the discussion of issues of representing learning designs for sharing and reuse evidenced in the interim report and highlights problems with the concept of practice models (section 2), characterises the requirements teachers have of effective representations (section 3), evaluates a number of types of representation against these requirements (section 4), explores the more technically focused role of sequencing representations and controlled vocabularies (sections 5 & 6), documents some generic learning designs (section 8.2) and suggests ways forward for bridging the gap between teachers and developers (section 2.6).
All quotations are taken from the Mod4L wiki unless otherwise stated
Enterprise Systems Analysis and Modelling
In ES implementations, process modelling is a critical and often overlooked activity. This paper proposes a framework for process modelling of ES. The four steps method involves: Current Situation Analysis, Business Process Improvements and Requirements, Gap Analysis, and To-be process to develop. Outputs of the methodology are an interdependent set of organizational and system proposed changes, and feedback loops to the ES vendors and to the strategy of the firm. In-depth case studies and extensive literature review provides methodological support. For practitioners, this study provides useful insights into one of the reasons by which companies could be frustrated with ES implementation.E-business, ERP
Designing Software Architectures As a Composition of Specializations of Knowledge Domains
This paper summarizes our experimental research and software development activities in designing robust, adaptable and reusable software architectures. Several years ago, based on our previous experiences in object-oriented software development, we made the following assumption: âA software architecture should be a composition of specializations of knowledge domainsâ. To verify this assumption we carried out three pilot projects. In addition to the application of some popular domain analysis techniques such as use cases, we identified the invariant compositional structures of the software architectures and the related knowledge domains. Knowledge domains define the boundaries of the adaptability and reusability capabilities of software systems. Next, knowledge domains were mapped to object-oriented concepts. We experienced that some aspects of knowledge could not be directly modeled in terms of object-oriented concepts. In this paper we describe our approach, the pilot projects, the experienced problems and the adopted solutions for realizing the software architectures. We conclude the paper with the lessons that we learned from this experience
Agile, Web Engineering and Capability Maturity ModelI ntegration : A systematic literature review
Context
Agile approaches are an alternative for organizations developing software, particularly for those who develop Web applications. Besides, CMMI (Capability Maturity Model Integration) models are well-established approaches focused on assessing the maturity of an organization that develops software. Web Engineering is the field of Software Engineering responsible for analyzing and studying the specific characteristics of the Web. The suitability of an Agile approach to help organizations reach a certain CMMI maturity level in Web environments will be very interesting, as they will be able to keep the ability to quickly react and adapt to changes as long as their development processes get mature.
Objective
This paper responds to whether it is feasible or not, for an organization developing Web systems, to achieve a certain maturity level of the CMMI-DEV model using Agile methods.
Method
The proposal is analyzed by means of a systematic literature review of the relevant approaches in the field, defining a characterization schema in order to compare them to introduce the current state-of-the-art.
Results
The results achieved after the systematic literature review are presented, analyzed and compared against the defined schema, extracting relevant conclusions for the different dimensions of the problem: compatibility, compliance, experience, maturity and Web.
Conclusion
It is concluded that although the definition of an Agile approach to meet the different CMMI maturity levels goals could be possible for an organization developing Web systems, there is still a lack of detailed studies and analysis on the field
Self-Reconfigurable Analog Arrays: Off-The Shelf Adaptive Electronics for Space Applications
Development of analog electronic solutions for space avionics is expensive and lengthy. Lack of flexible analog devices, counterparts to digital Field Programmable Gate Arrays (FPGA), prevents analog designers from benefits of rapid prototyping. This forces them to expensive and lengthy custom design, fabrication, and qualification of application specific integrated circuits (ASIC). The limitations come from two directions: commercial Field Programmable Analog Arrays (FPAA) have limited variability in the components offered on-chip; and they are only qualified for best case scenarios for military grade (-55C to +125C). In order to avoid huge overheads, there is a growing trend towards avoiding thermal and radiation protection by developing extreme environment electronics, which maintain correct operation while exposed to temperature extremes (-180degC to +125degC). This paper describes a recent FPAA design, the Self-Reconfigurable Analog Array (SRAA) developed at JPL. It overcomes both limitations, offering a variety of analog cells inside the array together with the possibility of self-correction at extreme temperatures
- âŠ