The scheduling of sparse matrix-vector multiplication on a massively parallel dap computer

An efficient data structure is presented which supports general unstructured sparse matrix-vector multiplications on a Distributed Array of Processors (DAP). This approach seeks to reduce the inter-processor data movements and organises the operations in batches of massively parallel steps by a heuristic scheduling procedure performed on the host computer. The resulting data structure is of particular relevance to iterative schemes for solving linear systems. Performance results for matrices taken from well known Linear Programming (LP) test problems are presented and analysed

Privately Connecting Mobility to Infectious Diseases via Applied Cryptography

Human mobility is undisputedly one of the critical factors in infectious disease dynamics. Until a few years ago, researchers had to rely on static data to model human mobility, which was then combined with a transmission model of a particular disease resulting in an epidemiological model. Recent works have consistently been showing that substituting the static mobility data with mobile phone data leads to significantly more accurate models. While prior studies have exclusively relied on a mobile network operator's subscribers' aggregated data, it may be preferable to contemplate aggregated mobility data of infected individuals only. Clearly, naively linking mobile phone data with infected individuals would massively intrude privacy. This research aims to develop a solution that reports the aggregated mobile phone location data of infected individuals while still maintaining compliance with privacy expectations. To achieve privacy, we use homomorphic encryption, zero-knowledge proof techniques, and differential privacy. Our protocol's open-source implementation can process eight million subscribers in one and a half hours. Additionally, we provide a legal analysis of our solution with regards to the EU General Data Protection Regulation.Comment: Added differentlial privacy experiments and new benchmark

MiMC:Efficient Encryption and Cryptographic Hashing with Minimal Multiplicative Complexity

We explore cryptographic primitives with low multiplicative complexity. This is motivated by recent progress in practical applications of secure multi-party computation (MPC), fully homomorphic encryption (FHE), and zero-knowledge proofs (ZK) where primitives from symmetric cryptography are needed and where linear computations are, compared to non-linear operations, essentially ``free\u27\u27. Starting with the cipher design strategy ``LowMC\u27\u27 from Eurocrypt 2015, a number of bit-oriented proposals have been put forward, focusing on applications where the multiplicative depth of the circuit describing the cipher is the most important optimization goal. Surprisingly, albeit many MPC/FHE/ZK-protocols natively support operations in \GF{p} for large $p$, very few primitives, even considering all of symmetric cryptography, natively work in such fields. To that end, our proposal for both block ciphers and cryptographic hash functions is to reconsider and simplify the round function of the Knudsen-Nyberg cipher from 1995. The mapping $F(x) := x^3$ is used as the main component there and is also the main component of our family of proposals called ``MiMC\u27\u27. We study various attack vectors for this construction and give a new attack vector that outperforms others in relevant settings. Due to its very low number of multiplications, the design lends itself well to a large class of new applications, especially when the depth does not matter but the total number of multiplications in the circuit dominates all aspects of the implementation. With a number of rounds which we deem secure based on our security analysis, we report on significant performance improvements in a representative use-case involving SNARKs

Channelization for Multi-Standard Software-Defined Radio Base Stations

As the number of radio standards increase and spectrum resources come under more pressure, it becomes ever less efficient to reserve bands of spectrum for exclusive use by a single radio standard. Therefore, this work focuses on channelization structures compatible with spectrum sharing among multiple wireless standards and dynamic spectrum allocation in particular. A channelizer extracts independent communication channels from a wideband signal, and is one of the most computationally expensive components in a communications receiver. This work specifically focuses on non-uniform channelizers suitable for multi-standard Software-Defined Radio (SDR) base stations in general and public mobile radio base stations in particular. A comprehensive evaluation of non-uniform channelizers (existing and developed during the course of this work) shows that parallel and recombined variants of the Generalised Discrete Fourier Transform Modulated Filter Bank (GDFT-FB) represent the best trade-off between computational load and flexibility for dynamic spectrum allocation. Nevertheless, for base station applications (with many channels) very high filter orders may be required, making the channelizers difficult to physically implement. To mitigate this problem, multi-stage filtering techniques are applied to the GDFT-FB. It is shown that these multi-stage designs can significantly reduce the filter orders and number of operations required by the GDFT-FB. An alternative approach, applying frequency response masking techniques to the GDFT-FB prototype filter design, leads to even bigger reductions in the number of coefficients, but computational load is only reduced for oversampled configurations and then not as much as for the multi-stage designs. Both techniques render the implementation of GDFT-FB based non-uniform channelizers more practical. Finally, channelization solutions for some real-world spectrum sharing use cases are developed before some final physical implementation issues are considered

Development of Some Spatial-domain Preprocessing and Post-processing Algorithms for Better 2-D Up-scaling

Image super-resolution is an area of great interest in recent years and is extensively used in applications like video streaming, multimedia, internet technologies, consumer electronics, display and printing industries. Image super-resolution is a process of increasing the resolution of a given image without losing its integrity. Its most common application is to provide better visual effect after resizing a digital image for display or printing. One of the methods of improving the image resolution is through the employment of a 2-D interpolation. An up-scaled image should retain all the image details with very less degree of blurring meant for better visual quality. In literature, many efficient 2-D interpolation schemes are found that well preserve the image details in the up-scaled images; particularly at the regions with edges and fine details. Nevertheless, these existing interpolation schemes too give blurring effect in the up-scaled images due to the high frequency (HF) degradation during the up-sampling process. Hence, there is a scope to further improve their performance through the incorporation of various spatial domain pre-processing, post-processing and composite algorithms. Therefore, it is felt that there is sufficient scope to develop various efficient but simple pre-processing, post-processing and composite schemes to effectively restore the HF contents in the up-scaled images for various online and off-line applications. An efficient and widely used Lanczos-3 interpolation is taken for further performance improvement through the incorporation of various proposed algorithms. The various pre-processing algorithms developed in this thesis are summarized here. The term pre-processing refers to processing the low-resolution input image prior to image up-scaling. The various pre-processing algorithms proposed in this thesis are: Laplacian of Laplacian based global pre-processing (LLGP) scheme; Hybrid global pre-processing (HGP); Iterative Laplacian of Laplacian based global pre-processing (ILLGP); Unsharp masking based pre-processing (UMP); Iterative unsharp masking (IUM); Error based up-sampling(EU) scheme. The proposed algorithms: LLGP, HGP and ILLGP are three spatial domain preprocessing algorithms which are based on 4th, 6th and 8th order derivatives to alleviate nonuniform blurring in up-scaled images. These algorithms are used to obtain the high frequency (HF) extracts from an image by employing higher order derivatives and perform precise sharpening on a low resolution image to alleviate the blurring in its 2-D up-sampled counterpart. In case of unsharp masking based pre-processing (UMP) scheme, the blurred version of a low resolution image is used for HF extraction from the original version through image subtraction. The weighted version of the HF extracts are superimposed with the original image to produce a sharpened image prior to image up-scaling to counter blurring effectively. IUM makes use of many iterations to generate an unsharp mask which contains very high frequency (VHF) components. The VHF extract is the result of signal decomposition in terms of sub-bands using the concept of analysis filter bank. Since the degradation of VHF components is maximum, restoration of such components would produce much better restoration performance. EU is another pre-processing scheme in which the HF degradation due to image upscaling is extracted and is called prediction error. The prediction error contains the lost high frequency components. When this error is superimposed on the low resolution image prior to image up-sampling, blurring is considerably reduced in the up-scaled images. Various post-processing algorithms developed in this thesis are summarized in following. The term post-processing refers to processing the high resolution up-scaled image. The various post-processing algorithms proposed in this thesis are: Local adaptive Laplacian (LAL); Fuzzy weighted Laplacian (FWL); Legendre functional link artificial neural network(LFLANN). LAL is a non-fuzzy, local based scheme. The local regions of an up-scaled image with high variance are sharpened more than the region with moderate or low variance by employing a local adaptive Laplacian kernel. The weights of the LAL kernel are varied as per the normalized local variance so as to provide more degree of HF enhancement to high variance regions than the low variance counterpart to effectively counter the non-uniform blurring. Furthermore, FWL post-processing scheme with a higher degree of non-linearity is proposed to further improve the performance of LAL. FWL, being a fuzzy based mapping scheme, is highly nonlinear to resolve the blurring problem more effectively than LAL which employs a linear mapping. Another LFLANN based post-processing scheme is proposed here to minimize the cost function so as to reduce the blurring in a 2-D up-scaled image. Legendre polynomials are used for functional expansion of the input pattern-vector and provide high degree of nonlinearity. Therefore, the requirement of multiple layers can be replaced by single layer LFLANN architecture so as to reduce the cost function effectively for better restoration performance. With single layer architecture, it has reduced the computational complexity and hence is suitable for various real-time applications. There is a scope of further improvement of the stand-alone pre-processing and postprocessing schemes by combining them through composite schemes. Here, two spatial domain composite schemes, CS-I and CS-II are proposed to tackle non-uniform blurring in an up-scaled image. CS-I is developed by combining global iterative Laplacian (GIL) preprocessing scheme with LAL post-processing scheme. Another highly nonlinear composite scheme, CS-II is proposed which combines ILLGP scheme with a fuzzy weighted Laplacian post-processing scheme for more improved performance than the stand-alone schemes. Finally, it is observed that the proposed algorithms: ILLGP, IUM, FWL, LFLANN and CS-II are better algorithms in their respective categories for effectively reducing blurring in the up-scaled images

Exploring Parallelism to Improve the Performance of FrodoKEM in Hardware

FrodoKEM is a lattice-based key encapsulation mechanism, currently a semi-finalist in NIST’s post-quantum standardisation effort. A condition for these candidates is to use NIST standards for sources of randomness (i.e. seed-expanding), and as such most candidates utilise SHAKE, an XOF defined in the SHA-3 standard. However, for many of the candidates, this module is a significant implementation bottleneck. Trivium is a lightweight, ISO standard stream cipher which performs well in hardware and has been used in previous hardware designs for lattice-based cryptography. This research proposes optimised designs for FrodoKEM, concentrating on high throughput by parallelising the matrix multiplication operations within the cryptographic scheme. This process is eased by the use of Trivium due to its higher throughput and lower area consumption. The parallelisations proposed also complement the addition of first-order masking to the decapsulation module. Overall, we significantly increase the throughput of FrodoKEM; for encapsulation we see a 16 × speed-up, achieving 825 operations per second, and for decapsulation we see a 14 × speed-up, achieving 763 operations per second, compared to the previous state of the art, whilst also maintaining a similar FPGA area footprint of less than 2000 slices.</p