Virtual bloXing - assembly rapid prototyping for near net shapes

Virtual reality (VR) provides another dimension to many engineering applications. Its immersive and interactive nature allows an intuitive approach to study both cognitive activities and performance evaluation. Market competitiveness means having products meet form, fit and function quickly. Rapid Prototyping and Manufacturing (RP&M) technologies are increasingly being applied to produce functional prototypes and the direct manufacturing of small components. Despite its flexibility, these systems have common drawbacks such as slow build rates, a limited number of build axes (typically one) and the need for post processing. This paper presents a Virtual Assembly Rapid Prototyping (VARP) project which involves evaluating cognitive activities in assembly tasks based on the adoption of immersive virtual reality along with a novel nonlayered rapid prototyping for near net shape (NNS) manufacturing of components. It is envisaged that this integrated project will facilitate a better understanding of design for manufacture and assembly by utilising equivalent scale digital and physical prototyping in one rapid prototyping system. The state of the art of the VARP project is also presented in this paper

Virtual assembly rapid prototyping of near net shapes

Virtual reality (VR) provides another dimension to many engineering applications. Its immersive and interactive nature allows an intuitive approach to study both cognitive activities and performance evaluation. Market competitiveness means having products meet form, fit and function quickly. Rapid Prototyping and Manufacturing (RP&M) technologies are increasingly being applied to produce functional prototypes and the direct manufacturing of small components. Despite its flexibility, these systems have common drawbacks such as slow build rates, a limited number of build axes (typically one) and the need for post processing. This paper presents a Virtual Assembly Rapid Prototyping (VARP) project which involves evaluating cognitive activities in assembly tasks based on the adoption of immersive virtual reality along with a novel non-layered rapid prototyping for near net shape (NNS) manufacturing of components. It is envisaged that this integrated project will facilitate a better understanding of design for manufacture and assembly by utilising equivalent scale digital and physical prototyping in one rapid prototyping system. The state of the art of the VARP project is also presented in this paper

Survey on Additive Manufacturing, Cloud 3D Printing and Services

Cloud Manufacturing (CM) is the concept of using manufacturing resources in a service oriented way over the Internet. Recent developments in Additive Manufacturing (AM) are making it possible to utilise resources ad-hoc as replacement for traditional manufacturing resources in case of spontaneous problems in the established manufacturing processes. In order to be of use in these scenarios the AM resources must adhere to a strict principle of transparency and service composition in adherence to the Cloud Computing (CC) paradigm. With this review we provide an overview over CM, AM and relevant domains as well as present the historical development of scientific research in these fields, starting from 2002. Part of this work is also a meta-review on the domain to further detail its development and structure

A Review of State-of-the-Art Large Sized Foam Cutting Rapid Prototyping and Manufacturing Technologies.

Purpose – Current additive rapid prototyping (RP) technologies fail to efficiently produce objects greater than 0.5?m3 due to restrictions in build size, build time and cost. A need exists to develop RP and manufacturing technologies capable of producing large objects in a rapid manner directly from computer-aided design data. Foam cutting RP is a relatively new technology capable of producing large complex objects using inexpensive materials. The purpose of this paper is to describe nine such technologies that have been developed or are currently being developed at institutions around the world. The relative merits of each system are discussed. Recommendations are given with the aim of enhancing the performance of existing and future foam cutting RP systems. Design/methodology/approach – The review is based on an extensive literature review covering academic publications, company documents and web site information. Findings – The paper provides insights into the different machine configurations and cutting strategies. The most successful machines and cutting strategies are identified. Research limitations/implications – Most of the foam cutting RP systems described have not been developed to the commercial level, thus a benchmark study directly comparing the nine systems was not possible. Originality/value – This paper provides the first overview of foam cutting RP technology, a field which is over a decade old. The information contained in this paper will help improve future developments in foam cutting RP systems

Automatic generation of robot and manual assembly plans using octrees

This paper aims to investigate automatic assembly planning for robot and manual assembly. The octree decomposition technique is applied to approximate CAD models with an octree representation which are then used to generate robot and manual assembly plans. An assembly planning system able to generate assembly plans was developed to build these prototype models. Octree decomposition is an effective assembly planning tool. Assembly plans can automatically be generated for robot and manual assembly using octree models. Research limitations/implications - One disadvantage of the octree decomposition technique is that it approximates a part model with cubes instead of using the actual model. This limits its use and applications when complex assemblies must be planned, but in the context of prototyping can allow a rough component to be formed which can later be finished by hand. Assembly plans can be generated using octree decomposition, however, new algorithms must be developed to overcome its limitations

Development of an Automated Multiple Material Stereolithography Machine

An automated Multiple Material Stereolithography (MMSL) machine was developed by integrating components of a 3D Systems 250/50 stereolithography (SL) machine in a separate stand-alone system and adapting them to function with additional components required for MMSL operation. We previously reported retrofitting a 250/50 SL machine with multiple vats to accommodate multiple material fabrication for building a wide variety of multi-material models (Wicker et al., 2004). In the MMSL retrofit, spatial constraints limited the multiple vats located circumferentially on a vertical rotating vat carousel to cross-sectional areas of approximately 4.5-inches by 4.5-inches. The limited build size of the retrofitted 250/50 motivated the full development of a new system with multiple material build capabilities comparable to the build envelope of the original 250/50 machine. The new MMSL machine required fabrication of a large system frame, incorporating various 250/50 components and software, and adding a variety of new components and software. By using many existing components and software, the previous engineering development of 3D Systems could be directly applied to this new technology. Components that were transferred from an existing 250/50 to the MMSL machine included the complete optical system (including the optics plate with laser, mirrors, beam expander, scanning mirrors, and focusing lens), the rim assembly (including the laser beam profilers), the associated controllers (computer system, scanning mirror controller, power supply-vat controller) and the wiring harness. In addition to the new frame, the MMSL machine required the development of a new rotating vat carousel system, platform assembly, multi-pump filling/leveling system, and a custom LabVIEW® control system to provide automated control over the MMSL process. The overall operation of the MMSL system was managed using the LabVIEW® program, which also included controlling a new vat leveling system and new linear and rotational stages, while the 3D Systems software (Buildstation 4.0) was retained for controlling the laser scanning process. As a demonstration of MMSL technology, simple multi material parts were fabricated with vertically and horizontally oriented interfaces. The fully functional MMSL system offers enormous potential for fabricating a wide variety of multiple material functional devices.Mechanical Engineerin

The potential of additive manufacturing in the smart factory industrial 4.0: A review

Additive manufacturing (AM) or three-dimensional (3D) printing has introduced a novel production method in design, manufacturing, and distribution to end-users. This technology has provided great freedom in design for creating complex components, highly customizable products, and efficient waste minimization. The last industrial revolution, namely industry 4.0, employs the integration of smart manufacturing systems and developed information technologies. Accordingly, AM plays a principal role in industry 4.0 thanks to numerous benefits, such as time and material saving, rapid prototyping, high efficiency, and decentralized production methods. This review paper is to organize a comprehensive study on AM technology and present the latest achievements and industrial applications. Besides that, this paper investigates the sustainability dimensions of the AM process and the added values in economic, social, and environment sections. Finally, the paper concludes by pointing out the future trend of AM in technology, applications, and materials aspects that have the potential to come up with new ideas for the future of AM explorations

Rapid manufacturing as a tool for agile manufacturing: applications and implementation perspectives

Manufacturing engineers and technologists around the globe are already well familiar with manufacturing methodologies and systems developments in the last part of the twentieth century. Many are probably also familiar with the current state of Rapid Prototyping (RP) technologies, especially in the areas of concept model making and prototype development. They may not however, be so familiar with the more recent developments of these technologies towards Rapid Manufacturing (RM) and the directions which the applications of RM technologies are taking for agile manufacturing purposes in particular. This paper critically reviews the various technologies currently available, outlines development trends in RM, discusses the approach, application and implementation perspectives by which these RM technologies are applied for increasing agility and responsiveness in manufacturing. Furthermore, the paper describes two case study examples to further illustrate the application scenarios in agile manufacturing before concluding remarks

Implementing Rapid Prototyping Using CNC Machining (CNC-RP) Through a CAD/CAM Interface

This paper presents the methodology and implementation of a rapid machining system using a CAD/CAM interface. Rapid Prototyping using CNC Machining (CNC-RP) is a method that has been developed which enables automatic generation of process plans for a machined component. The challenge with CNC-RP is not the technical problems of material removal, but with all of the required setup, fixture and toolpath planning, which has previously required a skilled machinist. Through the use of advanced geometric algorithms, we have implemented an interface with a CAD/CAM system that allows true automatic NC code generation directly from a CAD model with no human interaction; a capability necessary for a practical rapid prototyping system.Mechanical Engineerin