Research Article Analysis of Worst-month Relationship with Annual Rain Attenuation in Malaysia

Abstract: The main of this study is to study effect of rain attenuation during the annual and worst month towards communication link especially in the region where heavy rain is a main factor to signal degeration at high frequencies above 10 GHz. Spectral congestion due to the high demand in satellite communication has enforced the development of the conventional frequency bands. Lower frequency band have shifted to higher frequency band such as microwave frequency in order to provide higher data rates as well as wider bandwidths. However, rain fade has become the major hindrance which could cause severe perturbation towards wireless communication tools and satellite communications. Therefore, in this study, analysis of 1 year rain attenuation measurement was done, in order to observe the relationship between the average worst month statistics with the average annual distribution. The result obtained was found to be large different with the one proposed by ITU, hence for better accuracy, the values of Q 1 and β was modified to be adapted in Malaysia

Estimation of satellite link’s fade margin using non-meteorological technique and worst month analysis

Satellite technology is shifting to higher frequencies such as Q or V-band to cater to greater bandwidth and higher data rates applications such as videoconferencing, internet of things (IoT) and telemedicine. The main challenge in deploying high-frequency bands in heavy precipitation areas is severe rain attenuation. In this paper, a frequency scaling technique was developed to estimate the fade margin at a higher frequency. The worst month analysis was also conducted since the analysis is also important in determining dependable fade margin. The result was evaluated and analyzed using root mean square error (RMSE) and percentage error. The proposed model offers the smallest RMSE and lowest percentage error when compared to all existing prediction models. A dependable fade margin acquired from high-accuracy rain attenuation estimation is very important. This is to apply the best mitigation technique in overcoming rain attenuation in the satellite-Earth link so that, the best system performance can be delivered

Estimation of monsoon rainfall by single polarization weather radar

Weather radar can offer synoptic measurement at a higher temporal and spatial resolution to extract the rain information. Rainfall can be inverted from the radar reflectivity using the power-law relation to ground rain gauge measurement. The relationship known as Z-R model has been established in many variants but the uncertainty from the sampling bias and the Z-R variability of single-polarization radar observation on monsoon rain becomes subject to research. This study reports a novel research framework to systematically estimate the monsoon rainfall using new Z-R model on the single-polarization weather radar in Kelantan. The sampling bias was quantified by the pixel matching procedure while the non-linear Levenberg Marquardt (LM) regression and the Artificial Neural Network (ANN) regression at different rain intensity and radar range were introduced to minimise the Spatio-temporal variability of the new Z-R model. This study uses 10-minute reflectivity data recorded in Kota Bahru radar station and hourly rain record at the nearby 58 gauge stations in 2013 to 2015. The three-dimensional nearest neighbour interpolation proves that the sampling bias can be quantified. The LM shows an improvement of about 12% if the spatial adjustment was applied in the regression. Unlike LM, the ANN is more robust and independent to the spatial adjustment thus it could provide more accurate and reliable monsoon rain information in heterogenous rainy condition. The ANN model provides accuracy of ± 0.4 mm/hr, ± 1.0 mm/hr and ± 8.2 mm/hr for low, medium and high rain intensity respectively with correlation coefficient > 0.7 (p 0.5 and accuracy improvement about 8 %, 10% and 5% for abovementioned rain intensity respectively. Radar derived rainfall maps present the rain distribution was more concentrated in all downstream but only covered 1/3 of the upstream in Kelantan rivers. Further research is needed before the technique could be applied to any single-polarization system in Southeast Asia to achieve better accuracy of rain information extraction

OBSERVER-BASED-CONTROLLER FOR INVERTED PENDULUM MODEL

This paper presents a state space control technique for inverted pendulum system. The system is a common classical control problem that has been widely used to test multiple control algorithms because of its nonlinear and unstable behavior. Full state feedback based on pole placement and optimal control is applied to the inverted pendulum system to achieve desired design specification which are 4 seconds settling time and 5% overshoot. The simulation and optimization of the full state feedback controller based on pole placement and optimal control techniques as well as the performance comparison between these techniques is described comprehensively. The comparison is made to choose the most suitable technique for the system that have the best trade-off between settling time and overshoot. Besides that, the observer design is analyzed to see the effect of pole location and noise present in the system

A Review of Resonant Converter Control Techniques and The Performances

paper first discusses each control technique and then gives experimental results and/or performance to highlights their merits. The resonant converter used as a case study is not specified to just single topology instead it used few topologies such as series-parallel resonant converter (SPRC), LCC resonant converter and parallel resonant converter (PRC). On the other hand, the control techniques presented in this paper are self-sustained phase shift modulation (SSPSM) control, self-oscillating power factor control, magnetic control and the H-∞ robust control technique

A Review of Resonant Converter Control Techniques and The Performances

paper first discusses each control technique and then gives experimental results and/or performance to highlights their merits. The resonant converter used as a case study is not specified to just single topology instead it used few topologies such as series-parallel resonant converter (SPRC), LCC resonant converter and parallel resonant converter (PRC). On the other hand, the control techniques presented in this paper are self-sustained phase shift modulation (SSPSM) control, self-oscillating power factor control, magnetic control and the H-∞ robust control technique

State-Feedback Controller Based on Pole Placement Technique for Inverted Pendulum System

This paper presents a state space control technique for inverted pendulum system using simulation and real experiment via MATLAB/SIMULINK software. The inverted pendulum is difficult system to control in the field of control engineering. It is also one of the most important classical control system problems because of its nonlinear characteristics and unstable system. It has three main problems that always appear in control application which are nonlinear system, unstable and non-minimumbehavior phase system. This project will apply state feedback controller based on pole placement technique which is capable in stabilizing the practical based inverted pendulum at vertical position. Desired design specifications which are 4 seconds settling time and 5 % overshoot is needed to apply in full state feedback controller based on pole placement technique. First of all, the mathematical model of an inverted pendulum system is derived to obtain the state space representation of the system. Then, the design phase of the State-Feedback Controller can be conducted after linearization technique is performed to the nonlinear equation with the aid of mathematical aided software such as Mathcad. After that, the design is simulated using MATLAB/Simulink software. The controller design of the inverted pendulum system is verified using simulation and experiment test. Finally the controller design is compared with PID controller for benchmarking purpose