Quantitative geometric analysis of rib, costal cartilage and sternum from childhood to teenagehood

Better understanding of the effects of growth on children’s bones and cartilage is necessary for clinical and biomechanical purposes. The aim of this study is to define the 3D geometry of children’s rib cages: including sternum, ribs and costal cartilage. Three-dimensional reconstructions of 960 ribs, 518 costal cartilages and 113 sternebrae were performed on thoracic CT-scans of 48 children, aged four months to 15 years. The geometry of the sternum was detailed and nine parameters were used to describe the ribs and rib cages. A "costal index" was defined as the ratio between cartilage length and whole rib length to evaluate the cartilage ratio for each rib level. For all children, the costal index decreased from rib level one to three and increased from level three to seven. For all levels, the cartilage accounted for 45 to 60% of the rib length, and was longer for the first years of life. The mean costal index decreased by 21% for subjects over three years old compared to those under three (p<10-4). The volume of the sternebrae was found to be highly age dependent. Such data could be useful to define the standard geometry of the paediatric thorax and help to detect clinical abnormalities.Grant from the ANR (SECUR_ENFANT 06_0385) and supported by the GDR 2610 “Biomécanique des chocs” (CNRS/INRETS/GIE PSA Renault

Variability of Child Rib Bone Hounsfield Units using in vivo Computed Tomography

The variability assessment of the rib bone mechanical properties during the growth process is still missing. These properties could not be obtained in vivo on children. Relationships have been obtained between Hounsfield Units from computed tomography (CT) and mechanical properties (e.g. for the cortical bone on adults). As a first step for investigation of the mechanical properties of child ribs, the aim of this study was to determine the Hounsfield Units variation of child ribs from CT‐scan data, by rib level, along the rib and within the rib sections. Twenty‐seven right ribs of levels 4, 6 and 9 were processed from 11 thoracic CT scans of children without bone lesions aged between 1 and 10 years. A first set of 10 equidistributed cross‐sections normal to the rib midline were extracted. Sixteen equally distributed elements defined 4 areas into the cortical band: internal, external, caudal and cranial. Within the rib sections, Hounsfield Units were found significantly higher in internal and external areas than in caudal and cranial. In a further step using calibrated CT scans, it would be possible to derive the mechanical properties of in vivo child ribs using bone density correlation with Hounsfield Units

Experimental validation of a patient-specific model of orthotic action in adolescent idiopathic scoliosis

This is the author accepted manuscript. The final version is available from Springer via the DOI in this record.PURPOSE: Personalized modeling of brace action has potential in improving brace efficacy in adolescent idiopathic scoliosis (AIS). Model validation and simulation uncertainty are rarely addressed, limiting the clinical implementation of personalized models. We hypothesized that a thorough validation of a personalized finite element model (FEM) of brace action would highlight potential means of improving the model. METHODS: Forty-two AIS patients were included retrospectively and prospectively. Personalized FEMs of pelvis, spine and ribcage were built from stereoradiographies. Brace action was simulated through soft cylindrical pads acting on the ribcage and through displacements applied to key vertebrae. Simulation root mean squared errors (RMSEs) were calculated by comparison with the actual brace action (quantified through clinical indices, vertebral positions and orientations) observed in in-brace stereoradiographies. RESULTS: Simulation RMSEs of Cobb angle and vertebral apical axial rotation was lower than measurement uncertainty in 79 % of the patients. Pooling all patients and clinical indices, 87 % of the indices had lower RMSEs than the measurement uncertainty. CONCLUSIONS: In-depth analysis suggests that personalization of spinal functional units mechanical properties could improve the simulation's accuracy, but the model gave good results, thus justifying further research on its clinical application

3D reconstruction of ribcage geometry from biplanar radiographs using a statistical parametric model approach

Rib cage 3D reconstruction is an important prerequisite for thoracic spine modelling, particularly for studies of the deformed thorax in adolescent idiopathic scoliosis. This study proposes a new method for rib cage 3D reconstruction from biplanar radiographs, using a statistical parametric model approach. Simplified parametric models were defined at the hierarchical levels of rib cage surface, rib midline and rib surface, and applied on a database of 86 trunks. The resulting parameter database served to statistical models learning which were used to quickly provide a first estimate of the reconstruction from identifications on both radiographs. This solution was then refined by manual adjustments in order to improve the matching between model and image. Accuracy was assessed by comparison with 29 rib cages from CT scans in terms of geometrical parameter differences and in terms of line-to-line error distance between the rib midlines. Intra and inter-observer reproducibility were determined regarding 20 scoliotic patients. The first estimate (mean reconstruction time of 2’30) was sufficient to extract the main rib cage global parameters with a 95% confidence interval lower than 7%, 8%, 2% and 4° for rib cage volume, antero-posterior and lateral maximal diameters and maximal rib hump, respectively. The mean error distance was 5.4 mm (max 35mm) down to 3.6 mm (max 24 mm) after the manual adjustment step (+3’30). The proposed method will improve developments of rib cage finite element modeling and evaluation of clinical outcomes.This work was funded by Paris Tech BiomecAM chair on subject specific muscular skeletal modeling, and we express our acknowledgments to the chair founders: Cotrel foundation, Société générale, Protéor Company and COVEA consortium. We extend your acknowledgements to Alina Badina for medical imaging data, Alexandre Journé for his advices, and Thomas Joubert for his technical support

Evaluation of a patient-specific finite-element model to simulate conservative treatment in adolescent idiopathic scoliosis

PublishedJournal ArticleAuthor's accepted manuscript.Study design: Retrospective validation study. Objectives: To propose a method to evaluate, from a clinical standpoint, the ability of a finite-element model (FEM) of the trunk to simulate orthotic correction of spinal deformity and to apply it to validate a previously described FEM. Summary of background data: Several FEMs of the scoliotic spine have been described in the literature. These models can prove useful in understanding the mechanisms of scoliosis progression and in optimizing its treatment, but their validation has often been lacking or incomplete. Methods: Three-dimensional (3D) geometries of 10 patients before and during conservative treatment were reconstructed from biplanar radiographs. The effect of bracing was simulated by modeling displacements induced by the brace pads. Simulated clinical indices (Cobb angle, T1-T12 and T4-T12 kyphosis, L1-L5 lordosis, apical vertebral rotation, torsion, rib hump) and vertebral orientations and positions were compared to those measured in the patients' 3D geometries. Results: Errors in clinical indices were of the same order of magnitude as the uncertainties due to 3D reconstruction; for instance, Cobb angle was simulated with a root mean square error of 5.7°, and rib hump error was 5.6°. Vertebral orientation was simulated with a root mean square error of 4.8° and vertebral position with an error of 2.5 mm. Conclusions: The methodology proposed here allowed in-depth evaluation of subject-specific simulations, confirming that FEMs of the trunk have the potential to accurately simulate brace action. These promising results provide a basis for ongoing 3D model development, toward the design of more efficient orthoses.ParisTech BiomecAM chair programProteorParisTechYves Cotrel Foundation

Evaluation of a patient-specific finite element model to simulate conservative treatment in adolescent idiopathic scoliosis

Study design: Retrospective validation study Objectives: To propose a method to evaluate, from a clinical standpoint, the ability of a finite element model (FEM) of the trunk to simulate orthotic correction of spinal deformity, and to apply it to validate a previously described FEM Summary of background data: Several FEMs of the scoliotic spine have been described in the literature. These models can prove useful in understanding the mechanisms of scoliosis progression and in optimizing its treatment, but their validation has often been lacking or incomplete. Methods: Three-dimensional geometries of ten patients before and during conservative treatment were reconstructed from bi-planar radiographs. The effect of bracing was simulated by modeling displacements induced by the brace pads. Simulated clinical indices (Cobb angle, T1-T12 and T4-T12 kyphosis, L1-L5 lordosis, apical vertebral rotation, torsion, rib hump) and vertebral orientations and positions were compared to those measured in the patients’ three-dimensional geometries. Results: Errors in clinical indices were of the same order of magnitude as the uncertainties due to 3D reconstruction; for instance, Cobb angle was simulated with a root mean square error of 5.7° and rib hump error was 6.4°. Vertebral orientation was simulated with a root mean square error of 4.8° and vertebral position with an error of 2.5 mm. Conclusions: The methodology proposed here allowed in-depth evaluation of subject-specific simulations, confirming that FEMs of the trunk have the potential to accurately simulate brace action. These promising results provide a basis for ongoing 3D model development, toward the design of more efficient orthoses.The authors are grateful to the ParisTech BiomecAM chair program on subject-specific musculoskeletal modelling for funding (with the support of Proteor, ParisTech and Yves Cotrel Foundations) and to EOS imaging for logistic support in data collection

Morphometric study of the skeleton of the thorax in human fetuses aged 7-10 months

Introduction. It is necessary to clearly understand the norms of morphometric parameters of thorax during the fetal period of human ontogenesis, which is one of the main directions to solve the problem of modern normology. Objective. To trace the dynamics of changes of morphometric parameters of the bony thorax in human fetuses aged 7-10 months. Materials and methods. The anatomical study involved 39 human fetuses specimens of 231.0-375.0 mm of crown-rump length (CRL). The study was conducted by means of macro-microscopic preparation, morphometry and variation statistics method. Results. It was found that the length of the costal cartilage increases from rib I to VII and is the longest in the rib VII. The ribs are the highest along the midclavicular line. At the same time, the height of the ribs decreases along the posterior axillary line and becomes the shortest along the scapular line. It was revealed the greatest width of the II and III intercostal spaces along the parasternal and midclavicular lines. The width of the four superior intercostal spaces along the midclavicular line on the right and on the left is larger than the height of the corresponding ribs. The width of the II-X intercostal spaces on the right and on the left along the scapular lines exceeds the height of the corresponding ribs in 1.33-1.65 times. The greatest width of the II, IV and VII intercostal spaces was along the posterior axillary line both sided. The greatest width of the II, IV and X of the intercostal spaces was noted along the scapular lines. Conclusions. The length of the costal cartilage increases from rib I to VII and is the largest in VII ones. The smallest value of the length of the costal cartilage was found in the rib XII. During the 7th-10th months of the intrauterine development, an intensive increase in the length of costal cartilages of the ribs I-III occurs, on average, by 1.5 times, and there is a slow increase in the length of the costal cartilage of the rib VII. The ribs along the midclavicular line are the highest. At the same time, the height of the ribs decreases along the posterior axillary line and along the scapular line it is the lowest