On-line Joint Limit Avoidance for Torque Controlled Robots by Joint Space Parametrization

This paper proposes control laws ensuring the stabilization of a time-varying desired joint trajectory, as well as joint limit avoidance, in the case of fully-actuated manipulators. The key idea is to perform a parametrization of the feasible joint space in terms of exogenous states. It follows that the control of these states allows for joint limit avoidance. One of the main outcomes of this paper is that position terms in control laws are replaced by parametrized terms, where joint limits must be avoided. Stability and convergence of time-varying reference trajectories obtained with the proposed method are demonstrated to be in the sense of Lyapunov. The introduced control laws are verified by carrying out experiments on two degrees-of-freedom of the humanoid robot iCub.Comment: 8 pages, 4 figures. Submitted to the 2016 IEEE-RAS International Conference on Humanoid Robot

Self-motion control of kinematically redundant robot manipulators

Thesis (Master)--Izmir Institute of Technology, Mechanical Engineering, Izmir, 2012Includes bibliographical references (leaves: 88-92)Text in English; Abstract: Turkish and Englishxvi,92 leavesRedundancy in general provides space for optimization in robotics. Redundancy can be defined as sensor/actuator redundancy or kinematic redundancy. The redundancy considered in this thesis is the kinematic redundancy where the total degrees-of-freedom of the robot is more than the total degrees-of-freedom required for the task to be executed. This provides infinite number of solutions to perform the same task, thus, various subtasks can be carried out during the main-task execution. This work utilizes the property of self-motion for kinematically redundant robot manipulators by designing the general subtask controller that controls the joint motion in the null-space of the Jacobian matrix. The general subtask controller is implemented for various subtasks in this thesis. Minimizing the total joint motion, singularity avoidance, posture optimization for static impact force objectives, which include maximizing/minimizing the static impact force magnitude, and static and moving obstacle (point to point) collision avoidance are the subtasks considered in this thesis. New control architecture is developed to accomplish both the main-task and the previously mentioned subtasks. In this architecture, objective function for each subtask is formed. Then, the gradient of the objective function is used in the subtask controller to execute subtask objective while tracking a given end-effector trajectory. The tracking of the end-effector is called main-task. The SCHUNK LWA4-Arm robot arm with seven degrees-of-freedom is developed first in SolidWorks® as a computer-aided-design (CAD) model. Then, the CAD model is converted to MATLAB® Simulink model using SimMechanics CAD translator to be used in the simulation tests of the controller. Kinematics and dynamics equations of the robot are derived to be used in the controllers. Simulation test results are presented for the kinematically redundant robot manipulator operating in 3D space carrying out the main-task and the selected subtasks for this study. The simulation test results indicate that the developed controller’s performance is successful for all the main-task and subtask objectives

A Control Method for Joint Torque Minimization of Redundant Manipulators Handling Large External Forces

© 2019, The Author(s). In this paper, a control method is developed for minimizing joint torque on a redundant manipulator where an external force acts on the end-effector. Using null space control, the redundant task is designed to minimize the torque required to oppose the external force, and reduce the dynamic torque. Furthermore, the joint motion can be weighted to factor in physical constraints such as joint limits, collision avoidance, etc. Conventional methods for joint torque minimization only consider the internal dynamics of the manipulator. If external forces acting on the end-effector are inadvertently implemented in to these control methods this could lead to joint configurations that amplify the resulting joint torque. The proposed control method is verified through two different case studies. The first case study involves simulation of high-pressure blasting. The second is a simulation of a manipulator lifting and moving a heavy object. The results show that the proposed control method reduces overall joint torque compared to conventional methods. Furthermore, the joint torque is minimized such that there is potential for a manipulator to execute certain tasks beyond its nominal payload capacity

Manipulator Performance Measures - A Comprehensive Literature Survey

Due to copyright restrictions of the publisher this item is embargoed and access to the file is restricted until a year after the publishing date.The final publication is available at www.springerlink.comPerformance measures are quintessential to the design, synthesis, study and application of robotic manipulators. Numerous performance measures have been defined to study the performance and behavior of manipulators since the early days of robotics; some more widely accepted than others, but their real significance and limitations have not always been well understood. The aim of this survey is to review the definition, classification, scope, and limitations of some of the widely used performance measures. This work provides an extensive bibliography that can be of help to researchers interested in studying and evaluating the performance and behavior of robotic manipulators. Finally, a few recommendations are proposed based on the review so that the most commonly noticed limitations can be avoided when new performance measures are proposed.http://link.springer.com/article/10.1007/s10846-014-0024-y

Repeatable Motion Planning for Redundant Robots over Cyclic Tasks

We consider the problem of repeatable motion planning for redundant robotic systems performing cyclic tasks in the presence of obstacles. For this open problem, we present a control-based randomized planner, which produces closed collision-free paths in configuration space and guarantees continuous satisfaction of the task constraints. The proposed algorithm, which relies on bidirectional search and loop closure in the task-constrained configuration space, is shown to be probabilistically complete. A modified version of the planner is also devised for the case in which configuration-space paths are required to be smooth. Finally, we present planning results in various scenarios involving both free-flying and nonholonomic robots to show the effectiveness of the proposed method

Closed-loop inverse kinematics for redundant robots: Comparative assessment and two enhancements

Motivated by the need of a robust and practical Inverse Kinematics (IK) algorithm for the WAM robot arm, we reviewed the most used Closed-Loop IK (CLIK) methods for redundant robots, analysing their main points of concern: convergence, numerical error, singularity handling, joint limit avoidance, and the capability of reaching secondary goals. As a result of the experimental comparison, we propose two enhancements. The first is a new filter for the singular values of the Jacobian matrix that guarantees that its conditioning remains stable, while none of the filters found in literature is successful at doing so. The second is to combine a continuous task priority strategy with selective damping to generate smoother trajectories. Experimentation on the WAM robot arm shows that these two enhancements yield an IK algorithm that improves on the reviewed state-of-the-art ones, in terms of the good compromise it achieves between time step length, Jacobian conditioning, multiple task performance, and computational time, thus constituting a very solid option in practice. This proposal is general and applicable to other redundant robots.This research is partially funded by the CSIC project CINNOVA (201150E088) and the Catalan grant 2009SGR155. A. Colomé is also supported by the Spanish Ministry of Education, Culture and Sport via a FPU doctoral grant (AP2010-1989).Peer Reviewe

Continuous-time recurrent neural networks for quadratic programming: theory and engineering applications.

Liu Shubao.Thesis (M.Phil.)--Chinese University of Hong Kong, 2005.Includes bibliographical references (leaves 90-98).Abstracts in English and Chinese.Abstract --- p.i摘要 --- p.iiiAcknowledgement --- p.ivChapter 1 --- Introduction --- p.1Chapter 1.1 --- Time-Varying Quadratic Optimization --- p.1Chapter 1.2 --- Recurrent Neural Networks --- p.3Chapter 1.2.1 --- From Feedforward to Recurrent Networks --- p.3Chapter 1.2.2 --- Computational Power and Complexity --- p.6Chapter 1.2.3 --- Implementation Issues --- p.7Chapter 1.3 --- Thesis Organization --- p.9Chapter I --- Theory and Models --- p.11Chapter 2 --- Linearly Constrained QP --- p.13Chapter 2.1 --- Model Description --- p.14Chapter 2.2 --- Convergence Analysis --- p.17Chapter 3 --- Quadratically Constrained QP --- p.26Chapter 3.1 --- Problem Formulation --- p.26Chapter 3.2 --- Model Description --- p.27Chapter 3.2.1 --- Model 1 (Dual Model) --- p.28Chapter 3.2.2 --- Model 2 (Improved Dual Model) --- p.28Chapter II --- Engineering Applications --- p.29Chapter 4 --- KWTA Network Circuit Design --- p.31Chapter 4.1 --- Introduction --- p.31Chapter 4.2 --- Equivalent Reformulation --- p.32Chapter 4.3 --- KWTA Network Model --- p.36Chapter 4.4 --- Simulation Results --- p.40Chapter 4.5 --- Conclusions --- p.40Chapter 5 --- Dynamic Control of Manipulators --- p.43Chapter 5.1 --- Introduction --- p.43Chapter 5.2 --- Problem Formulation --- p.44Chapter 5.3 --- Simplified Dual Neural Network --- p.47Chapter 5.4 --- Simulation Results --- p.51Chapter 5.5 --- Concluding Remarks --- p.55Chapter 6 --- Robot Arm Obstacle Avoidance --- p.56Chapter 6.1 --- Introduction --- p.56Chapter 6.2 --- Obstacle Avoidance Scheme --- p.58Chapter 6.2.1 --- Equality Constrained Formulation --- p.58Chapter 6.2.2 --- Inequality Constrained Formulation --- p.60Chapter 6.3 --- Simplified Dual Neural Network Model --- p.64Chapter 6.3.1 --- Existing Approaches --- p.64Chapter 6.3.2 --- Model Derivation --- p.65Chapter 6.3.3 --- Convergence Analysis --- p.67Chapter 6.3.4 --- Model Comparision --- p.69Chapter 6.4 --- Simulation Results --- p.70Chapter 6.5 --- Concluding Remarks --- p.71Chapter 7 --- Multiuser Detection --- p.77Chapter 7.1 --- Introduction --- p.77Chapter 7.2 --- Problem Formulation --- p.78Chapter 7.3 --- Neural Network Architecture --- p.82Chapter 7.4 --- Simulation Results --- p.84Chapter 8 --- Conclusions and Future Works --- p.88Chapter 8.1 --- Concluding Remarks --- p.88Chapter 8.2 --- Future Prospects --- p.88Bibliography --- p.8

Optimal redundancy control for robot manipulators

Optimal control for kinematically redundant robots is addressed for two different optimization problems. In the first optimization problem, we consider the minimization of the transfer time along a given Cartesian path for a redundant robot. This problem can be solved in two steps, by separating the generation of a joint path associated to the Cartesian path from the exact minimization of motion time under kinematic/dynamic bounds along the obtained parametrized joint path. In this thesis, multiple sub-optimal solutions can be found, depending on how redundancy is locally resolved in the joint space within the first step. A solution method that works at the acceleration level is proposed, by using weighted pseudoinversion, optimizing an inertia-related criterion, and including null-space damping. The obtained results demonstrate consistently good behaviors and definitely faster motion times in comparison with related methods proposed in the literature. The motion time obtained with the proposed method is close to the global time-optimal solution along the same Cartesian path. Furthermore, a reasonable tracking control performance is obtained on the experimental executed motions. In the second optimization problem, we consider the known phenomenon of torque oscillations and motion instabilities that occur in redundant robots during the execution of sufficiently long Cartesian trajectories when the joint torque is instantaneously minimized. In the framework of on-line local redundancy resolution methods, we propose basic variations of the minimum torque scheme to address this issue. Either the joint torque norm is minimized over two successive discrete-time samples using a short preview window, or we minimize the norm of the difference with respect to a desired momentum-damping joint torque, or the two schemes are combined together. The resulting local control methods are all formulated as well-posed linear-quadratic problems, and their closed-form solutions generate also low joint velocities while addressing the primary torque optimization objectives. Stable and consistent behaviors are obtained along short or long Cartesian position trajectories. For the two addressed optimization problems in this thesis, the results are obtained using three different robot systems, namely a 3R planar arm, a 6R Universal Robots UR10, and a 7R KUKA LWR robot